From: Hannes Reinecke <hare@suse.de>
To: Damien LeMoal <damien.lemoal@wdc.com>
Cc: linux-ide@vger.kernel.org, Hannes Reinecke <hare@suse.de>
Subject: [PATCH 1/2] libata: rework sysfs naming
Date: Thu, 24 Mar 2022 13:32:03 +0100 [thread overview]
Message-ID: <20220324123204.61534-2-hare@suse.de> (raw)
In-Reply-To: <20220324123204.61534-1-hare@suse.de>
This patch adds a new dummy bus 'ata', which collects all ata device
objects like ata_port, ata_link, and ata_dev, and adds an 'ata' prefix
to the message log.
To be consistent with the other libata objects the 'ata_port' object name
has been changed from 'ata' to 'port'.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/ata/libata-transport.c | 21 +++++++++++--
include/linux/libata.h | 54 ++++++++++------------------------
2 files changed, 34 insertions(+), 41 deletions(-)
diff --git a/drivers/ata/libata-transport.c b/drivers/ata/libata-transport.c
index ca129854a88c..555fe6e2293d 100644
--- a/drivers/ata/libata-transport.c
+++ b/drivers/ata/libata-transport.c
@@ -81,10 +81,13 @@ struct ata_internal {
tdev_to_port((dev)->parent)
-/* Device objects are always created whit link objects */
+/* Device objects are always created with link objects */
static int ata_tdev_add(struct ata_device *dev);
static void ata_tdev_delete(struct ata_device *dev);
+struct bus_type ata_bus_type = {
+ .name = "ata",
+};
/*
* Hack to allow attributes of the same name in different objects.
@@ -288,7 +291,9 @@ int ata_tport_add(struct device *parent,
dev->parent = parent;
ata_host_get(ap->host);
dev->release = ata_tport_release;
- dev_set_name(dev, "ata%d", ap->print_id);
+ dev->bus = &ata_bus_type;
+ dev_set_name(dev, "port%d", ap->print_id);
+
transport_setup_device(dev);
ata_acpi_bind_port(ap);
error = device_add(dev);
@@ -444,6 +449,8 @@ int ata_tlink_add(struct ata_link *link)
device_initialize(dev);
dev->parent = &ap->tdev;
dev->release = ata_tlink_release;
+ dev->bus = &ata_bus_type;
+
if (ata_is_host_link(link))
dev_set_name(dev, "link%d", ap->print_id);
else
@@ -695,8 +702,10 @@ static int ata_tdev_add(struct ata_device *ata_dev)
device_initialize(dev);
dev->parent = &link->tdev;
dev->release = ata_tdev_release;
+ dev->bus = &ata_bus_type;
+
if (ata_is_host_link(link))
- dev_set_name(dev, "dev%d.%d", ap->print_id,ata_dev->devno);
+ dev_set_name(dev, "dev%d.%d", ap->print_id, ata_dev->devno);
else
dev_set_name(dev, "dev%d.%d.0", ap->print_id, link->pmp);
@@ -822,8 +831,13 @@ __init int libata_transport_init(void)
error = transport_class_register(&ata_dev_class);
if (error)
goto out_unregister_port;
+ error = bus_register(&ata_bus_type);
+ if (error)
+ goto out_unregister_bus;
return 0;
+ out_unregister_bus:
+ bus_unregister(&ata_bus_type);
out_unregister_port:
transport_class_unregister(&ata_port_class);
out_unregister_link:
@@ -835,6 +849,7 @@ __init int libata_transport_init(void)
void __exit libata_transport_exit(void)
{
+ bus_unregister(&ata_bus_type);
transport_class_unregister(&ata_link_class);
transport_class_unregister(&ata_port_class);
transport_class_unregister(&ata_dev_class);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 0619ae462ecd..b17683b00c90 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -835,6 +835,7 @@ struct ata_port {
struct ata_host *host;
struct device *dev;
struct device tdev;
+ struct device cdev;
struct mutex scsi_scan_mutex;
struct delayed_work hotplug_task;
@@ -1458,61 +1459,38 @@ static inline int sata_srst_pmp(struct ata_link *link)
return link->pmp;
}
-#define ata_port_printk(level, ap, fmt, ...) \
- pr_ ## level ("ata%u: " fmt, (ap)->print_id, ##__VA_ARGS__)
-
#define ata_port_err(ap, fmt, ...) \
- ata_port_printk(err, ap, fmt, ##__VA_ARGS__)
+ dev_err(&ap->tdev, fmt, ##__VA_ARGS__)
#define ata_port_warn(ap, fmt, ...) \
- ata_port_printk(warn, ap, fmt, ##__VA_ARGS__)
+ dev_warn(&ap->tdev, fmt, ##__VA_ARGS__)
#define ata_port_notice(ap, fmt, ...) \
- ata_port_printk(notice, ap, fmt, ##__VA_ARGS__)
+ dev_notice(&ap->tdev, fmt, ##__VA_ARGS__)
#define ata_port_info(ap, fmt, ...) \
- ata_port_printk(info, ap, fmt, ##__VA_ARGS__)
+ dev_info(&ap->tdev, fmt, ##__VA_ARGS__)
#define ata_port_dbg(ap, fmt, ...) \
- ata_port_printk(debug, ap, fmt, ##__VA_ARGS__)
-
-#define ata_link_printk(level, link, fmt, ...) \
-do { \
- if (sata_pmp_attached((link)->ap) || \
- (link)->ap->slave_link) \
- pr_ ## level ("ata%u.%02u: " fmt, \
- (link)->ap->print_id, \
- (link)->pmp, \
- ##__VA_ARGS__); \
- else \
- pr_ ## level ("ata%u: " fmt, \
- (link)->ap->print_id, \
- ##__VA_ARGS__); \
-} while (0)
+ dev_dbg(&ap->tdev, fmt, ##__VA_ARGS__)
#define ata_link_err(link, fmt, ...) \
- ata_link_printk(err, link, fmt, ##__VA_ARGS__)
+ dev_err(&link->tdev, fmt, ##__VA_ARGS__)
#define ata_link_warn(link, fmt, ...) \
- ata_link_printk(warn, link, fmt, ##__VA_ARGS__)
+ dev_warn(&link->tdev, fmt, ##__VA_ARGS__)
#define ata_link_notice(link, fmt, ...) \
- ata_link_printk(notice, link, fmt, ##__VA_ARGS__)
+ dev_notice(&link->tdev, fmt, ##__VA_ARGS__)
#define ata_link_info(link, fmt, ...) \
- ata_link_printk(info, link, fmt, ##__VA_ARGS__)
+ dev_info(&link->tdev, fmt, ##__VA_ARGS__)
#define ata_link_dbg(link, fmt, ...) \
- ata_link_printk(debug, link, fmt, ##__VA_ARGS__)
-
-#define ata_dev_printk(level, dev, fmt, ...) \
- pr_ ## level("ata%u.%02u: " fmt, \
- (dev)->link->ap->print_id, \
- (dev)->link->pmp + (dev)->devno, \
- ##__VA_ARGS__)
+ dev_dbg(&link->tdev, fmt, ##__VA_ARGS__)
#define ata_dev_err(dev, fmt, ...) \
- ata_dev_printk(err, dev, fmt, ##__VA_ARGS__)
+ dev_err(&dev->tdev, fmt, ##__VA_ARGS__)
#define ata_dev_warn(dev, fmt, ...) \
- ata_dev_printk(warn, dev, fmt, ##__VA_ARGS__)
+ dev_warn(&dev->tdev, fmt, ##__VA_ARGS__)
#define ata_dev_notice(dev, fmt, ...) \
- ata_dev_printk(notice, dev, fmt, ##__VA_ARGS__)
+ dev_notice(&dev->tdev, fmt, ##__VA_ARGS__)
#define ata_dev_info(dev, fmt, ...) \
- ata_dev_printk(info, dev, fmt, ##__VA_ARGS__)
+ dev_info(&dev->tdev, fmt, ##__VA_ARGS__)
#define ata_dev_dbg(dev, fmt, ...) \
- ata_dev_printk(debug, dev, fmt, ##__VA_ARGS__)
+ dev_dbg(&dev->tdev, fmt, ##__VA_ARGS__)
void ata_print_version(const struct device *dev, const char *version);
--
2.29.2
next prev parent reply other threads:[~2022-03-24 12:32 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-24 12:32 [PATCHv3 0/2] libata: sysfs naming Hannes Reinecke
2022-03-24 12:32 ` Hannes Reinecke [this message]
2022-03-25 3:05 ` [PATCH 1/2] libata: rework " Damien Le Moal
2022-03-25 7:10 ` Hannes Reinecke
2022-03-24 12:32 ` [PATCH 2/2] libata: CONFIG_ATA_SYSFS_COMPAT Hannes Reinecke
2022-03-25 3:01 ` Damien Le Moal
2022-03-25 7:12 ` Hannes Reinecke
2022-03-25 7:16 ` Damien Le Moal
-- strict thread matches above, loose matches on Subject: below --
2022-03-25 12:56 [PATCHv4 0/2] libata: sysfs naming Hannes Reinecke
2022-03-25 12:56 ` [PATCH 1/2] libata: rework " Hannes Reinecke
2022-03-26 18:12 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220324123204.61534-2-hare@suse.de \
--to=hare@suse.de \
--cc=damien.lemoal@wdc.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox