[PATCH v3 4/5] ata: libata-scsi: support reporting options 2 in REPORT SUPPORTED OPERATION CODES

[Damien Le Moal <dlemoal@kernel.org>]

Add support for the reporting options value 2 of the in REPORT SUPPORTED
OPERATION CODES command in ata_scsi_report_supported_opcodes(). With this
reporting option, the specified opcode to check must have a service
action. Use ata_scsi_supported_cmd_has_sa() to check for this and fill the
command reply buffer using the one command format based on the command
support.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
---
 drivers/ata/libata-scsi.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 4d4cdf304740..5dd76579327e 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3774,6 +3774,13 @@ static unsigned int ata_scsi_report_supported_opcodes(struct ata_device *dev,
 			return 0;
 		}
 		break;
+	case 2:
+		/* One command format, must have sa. */
+		if (!ata_scsi_supported_cmd_use_sa(cdb[3])) {
+			ata_scsi_set_invalid_field(dev, cmd, 3, 0xff);
+			return 0;
+		}
+		fallthrough;
 	case 3:
 		/* One command format */
 		sa = get_unaligned_be16(&cdb[4]);
-- 
2.54.0