public inbox for linux-ide@vger.kernel.org
 help / color / mirror / Atom feed
From: Damien Le Moal <damien.lemoal@opensource.wdc.com>
To: Runa Guo-oc <RunaGuo-oc@zhaoxin.com>,
	linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org,
	Mario Limonciello <mario.limonciello@amd.com>
Subject: Re: [PATCH 1/2] ahci: Add PhyRdy Change control on actual LPM capability
Date: Thu, 21 Apr 2022 19:39:05 +0900	[thread overview]
Message-ID: <244f0c98-13f4-1ac4-9ebe-facdad4ae8b6@opensource.wdc.com> (raw)
In-Reply-To: <1650534217-14052-2-git-send-email-RunaGuo-oc@zhaoxin.com>

On 4/21/22 18:43, Runa Guo-oc wrote:
> On some platform, when OS enables LPM by default (eg, min_power),
> then, PhyRdy Change cannot be detected if ahci supports no LPM.

Do you mean "...if the ahci adapter does not support LPM." ?
If that is what you mean, then min_power should not be set. Mario has
patches to fix that.

> 
> In ahci spec, PhyRdy Change cannot coexist with LPM.
> 
> Adds support to control this case on actual LPM capability.
> 
> Signed-off-by: Runa Guo-oc <RunaGuo-oc@zhaoxin.com>
> ---
>  drivers/ata/ahci.c      | 9 +++++++++
>  drivers/ata/libata-eh.c | 4 ++++
>  include/linux/libata.h  | 4 ++++
>  3 files changed, 17 insertions(+)
> 
> diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
> index 397dfd2..03f0cb3 100644
> --- a/drivers/ata/ahci.c
> +++ b/drivers/ata/ahci.c
> @@ -1870,6 +1870,15 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
>  	else
>  		dev_info(&pdev->dev, "SSS flag set, parallel bus scan disabled\n");
>  
> +	if (hpriv->cap & HOST_CAP_PART)
> +		host->flags |= ATA_HOST_PART;
> +
> +	if (hpriv->cap & HOST_CAP_SSC)
> +		host->flags |= ATA_HOST_SSC;
> +
> +	if (hpriv->cap2 & HOST_CAP2_SDS)
> +		host->flags |= ATA_HOST_DEVSLP;
> +
>  	if (pi.flags & ATA_FLAG_EM)
>  		ahci_reset_em(host);
>  
> diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
> index 3307ed4..05b1043 100644
> --- a/drivers/ata/libata-eh.c
> +++ b/drivers/ata/libata-eh.c
> @@ -3246,6 +3246,10 @@ static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
>  	unsigned int err_mask;
>  	int rc;
>  
> +	/* if controller does not support lpm, then sets no LPM flags*/
> +	if (!(ap->host->flags & (ATA_HOST_PART | ATA_HOST_SSC | ATA_HOST_DEVSLP)))
> +		link->flags |= ATA_LFLAG_NO_LPM;
> +
>  	/* if the link or host doesn't do LPM, noop */
>  	if (!IS_ENABLED(CONFIG_SATA_HOST) ||
>  	    (link->flags & ATA_LFLAG_NO_LPM) || (ap && !ap->ops->set_lpm))
> diff --git a/include/linux/libata.h b/include/linux/libata.h
> index 732de90..7a243f4 100644
> --- a/include/linux/libata.h
> +++ b/include/linux/libata.h
> @@ -216,6 +216,10 @@ enum {
>  	ATA_HOST_PARALLEL_SCAN	= (1 << 2),	/* Ports on this host can be scanned in parallel */
>  	ATA_HOST_IGNORE_ATA	= (1 << 3),	/* Ignore ATA devices on this host. */
>  
> +	ATA_HOST_PART		= (1 << 4), /* Host support partial.*/
> +	ATA_HOST_SSC		= (1 << 5), /* Host support slumber.*/
> +	ATA_HOST_DEVSLP		= (1 << 6), /* Host support devslp.*/
> +
>  	/* bits 24:31 of host->flags are reserved for LLD specific flags */
>  
>  	/* various lengths of time */


-- 
Damien Le Moal
Western Digital Research

  reply	other threads:[~2022-04-21 10:39 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-21  9:43 [PATCH 0/2] ahci: Add some controls on actual LPM capability Runa Guo-oc
2022-04-21  9:43 ` [PATCH 1/2] ahci: Add PhyRdy Change control " Runa Guo-oc
2022-04-21 10:39   ` Damien Le Moal [this message]
2022-04-22  9:57     ` RunaGuo-oc
2022-04-22 22:37       ` Damien Le Moal
2022-04-27 10:18         ` Runa Guo-oc
2022-05-02 13:05           ` Damien Le Moal
2022-05-07  7:36             ` Runa Guo-oc
2022-05-11  8:14               ` Damien Le Moal
2022-05-18 21:31                 ` Limonciello, Mario
2022-04-21  9:43 ` [PATCH 2/2] ahci: Add PxSCTL.IPM " Runa Guo-oc
2022-04-21 10:53   ` Damien Le Moal
2022-04-22  9:58     ` RunaGuo-oc

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=244f0c98-13f4-1ac4-9ebe-facdad4ae8b6@opensource.wdc.com \
    --to=damien.lemoal@opensource.wdc.com \
    --cc=RunaGuo-oc@zhaoxin.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mario.limonciello@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox