* ata error
@ 2008-07-25 18:43 Stoyan Gaydarov
2008-07-25 18:47 ` Stoyan Gaydarov
0 siblings, 1 reply; 4+ messages in thread
From: Stoyan Gaydarov @ 2008-07-25 18:43 UTC (permalink / raw)
To: linux-ide
First thing, can you cc me as I am not a subscriber.
My box keeps freezing and the only thing i can see is that i continue
to get errors coming from libata.
stoyan@stoydesk:~$ uname -a
Linux stoydesk 2.6.24-19-generic #1 SMP Fri Jul 11 23:41:49 UTC 2008
i686 GNU/Linux
The end of dmesg:
[ 1078.546352] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 1078.546365] ata3.00: cmd 25/00:00:b6:2e:5b/00:01:28:00:00/e0 tag 0
dma 131072 in
[ 1078.546367] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 1078.546371] ata3.00: status: { DRDY }
[ 1078.546385] ata3: soft resetting link
[ 1078.735322] ata3.00: configured for UDMA/133
[ 1078.735336] ata3: EH complete
[ 1078.766066] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 1078.766442] sd 2:0:0:0: [sda] Write Protect is off
[ 1078.766448] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1078.766957] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1107.310768] [drm] Loading R300 Microcode
[ 1108.810987] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 1108.811000] ata3.00: cmd c8/00:08:6e:46:10/00:00:00:00:00/e2 tag 0
dma 4096 in
[ 1108.811002] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 1108.811006] ata3.00: status: { DRDY }
[ 1108.811021] ata3: soft resetting link
[ 1116.234620] [drm] Setting GART location based on new memory map
[ 1116.235636] [drm] Loading R300 Microcode
[ 1116.235730] [drm] writeback test succeeded in 2 usecs
[ 1117.841835] ata3.00: revalidation failed (errno=-2)
[ 1117.841843] ata3: failed to recover some devices, retrying in 5 secs
[ 1122.841292] ata3: soft resetting link
[ 1123.034315] ata3.00: configured for UDMA/133
[ 1123.034335] ata3: EH complete
[ 1123.053229] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 1123.053263] sd 2:0:0:0: [sda] Write Protect is off
[ 1123.053266] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1123.053293] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1144.790950] [drm] Loading R300 Microcode
[ 1153.185867] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 1153.185934] ata3.00: cmd ca/00:08:46:55:e9/00:00:00:00:00/e0 tag 0
dma 4096 out
[ 1153.185936] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 1153.185993] ata3.00: status: { DRDY }
[ 1153.186054] ata3: soft resetting link
[ 1153.378626] ata3.00: configured for UDMA/133
[ 1153.378638] ata3: EH complete
[ 1153.379063] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 1153.379269] sd 2:0:0:0: [sda] Write Protect is off
[ 1153.379272] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1153.379694] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1183.570407] ata3.00: limiting speed to UDMA/100:PIO4
[ 1183.570415] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 1183.570493] ata3.00: cmd c8/00:08:8e:24:27/00:00:00:00:00/e1 tag 0
dma 4096 in
[ 1183.570495] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 1183.570576] ata3.00: status: { DRDY }
[ 1183.570648] ata3: soft resetting link
[ 1183.764233] ata3.00: configured for UDMA/100
[ 1183.764243] ata3: EH complete
[ 1183.776780] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 1183.777051] sd 2:0:0:0: [sda] Write Protect is off
[ 1183.777055] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1183.777602] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1192.911301] [drm] Loading R300 Microcode
[ 1214.362549] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 1214.362560] ata3.00: cmd c8/00:08:2e:f3:7b/00:00:00:00:00/e0 tag 0
dma 4096 in
[ 1214.362562] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 1214.362566] ata3.00: status: { DRDY }
[ 1214.362580] ata3: soft resetting link
[ 1214.546911] ata3.00: configured for UDMA/100
[ 1214.546922] ata3: EH complete
[ 1214.559814] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 1214.559839] sd 2:0:0:0: [sda] Write Protect is off
[ 1214.559843] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1214.559869] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1216.802968] [drm] Setting GART location based on new memory map
[ 1216.803978] [drm] Loading R300 Microcode
[ 1216.804074] [drm] writeback test succeeded in 2 usecs
[ 1299.509565] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 1299.509578] ata3.00: cmd ca/00:58:86:a1:77/00:00:00:00:00/e0 tag 0
dma 45056 out
[ 1299.509580] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 1299.509584] ata3.00: status: { DRDY }
[ 1299.509598] ata3: soft resetting link
[ 1299.690019] ata3.00: configured for UDMA/100
[ 1299.690032] ata3: EH complete
[ 1299.702833] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 1299.702858] sd 2:0:0:0: [sda] Write Protect is off
[ 1299.702862] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1299.702888] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1394.623563] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 1394.623576] ata3.00: cmd ca/00:58:7e:a9:77/00:00:00:00:00/e0 tag 0
dma 45056 out
[ 1394.623578] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
0x4 (timeout)
[ 1394.623582] ata3.00: status: { DRDY }
[ 1399.658998] ata3: port is slow to respond, please be patient (Status 0x80)
[ 1399.886793] ata3: soft resetting link
[ 1400.067439] ata3.00: configured for UDMA/100
[ 1400.067450] ata3: EH complete
[ 1400.067907] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 1400.067930] sd 2:0:0:0: [sda] Write Protect is off
[ 1400.067933] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1400.067958] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
I know that its a timeout(says dmesg and the wiki) issue because
libata is probably waiting for an interrupt but doesn't get one, but
freezing my system is not that fun, if theres any other info that I
can provide to help me out and figure this out then let me know.
-Stoyan G
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: ata error
2008-07-25 18:43 ata error Stoyan Gaydarov
@ 2008-07-25 18:47 ` Stoyan Gaydarov
2008-07-25 18:56 ` Alan Cox
0 siblings, 1 reply; 4+ messages in thread
From: Stoyan Gaydarov @ 2008-07-25 18:47 UTC (permalink / raw)
To: linux-ide
On Fri, Jul 25, 2008 at 1:43 PM, Stoyan Gaydarov <stoyboyker@gmail.com> wrote:
> First thing, can you cc me as I am not a subscriber.
>
> My box keeps freezing and the only thing i can see is that i continue
> to get errors coming from libata.
>
> stoyan@stoydesk:~$ uname -a
> Linux stoydesk 2.6.24-19-generic #1 SMP Fri Jul 11 23:41:49 UTC 2008
> i686 GNU/Linux
>
> The end of dmesg:
>
> [ 1078.546352] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> [ 1078.546365] ata3.00: cmd 25/00:00:b6:2e:5b/00:01:28:00:00/e0 tag 0
> dma 131072 in
> [ 1078.546367] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
> 0x4 (timeout)
> [ 1078.546371] ata3.00: status: { DRDY }
> [ 1078.546385] ata3: soft resetting link
> [ 1078.735322] ata3.00: configured for UDMA/133
> [ 1078.735336] ata3: EH complete
> [ 1078.766066] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
> [ 1078.766442] sd 2:0:0:0: [sda] Write Protect is off
> [ 1078.766448] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 1078.766957] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 1107.310768] [drm] Loading R300 Microcode
> [ 1108.810987] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> [ 1108.811000] ata3.00: cmd c8/00:08:6e:46:10/00:00:00:00:00/e2 tag 0
> dma 4096 in
> [ 1108.811002] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
> 0x4 (timeout)
> [ 1108.811006] ata3.00: status: { DRDY }
> [ 1108.811021] ata3: soft resetting link
> [ 1116.234620] [drm] Setting GART location based on new memory map
> [ 1116.235636] [drm] Loading R300 Microcode
> [ 1116.235730] [drm] writeback test succeeded in 2 usecs
> [ 1117.841835] ata3.00: revalidation failed (errno=-2)
> [ 1117.841843] ata3: failed to recover some devices, retrying in 5 secs
> [ 1122.841292] ata3: soft resetting link
> [ 1123.034315] ata3.00: configured for UDMA/133
> [ 1123.034335] ata3: EH complete
> [ 1123.053229] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
> [ 1123.053263] sd 2:0:0:0: [sda] Write Protect is off
> [ 1123.053266] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 1123.053293] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 1144.790950] [drm] Loading R300 Microcode
> [ 1153.185867] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> [ 1153.185934] ata3.00: cmd ca/00:08:46:55:e9/00:00:00:00:00/e0 tag 0
> dma 4096 out
> [ 1153.185936] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
> 0x4 (timeout)
> [ 1153.185993] ata3.00: status: { DRDY }
> [ 1153.186054] ata3: soft resetting link
> [ 1153.378626] ata3.00: configured for UDMA/133
> [ 1153.378638] ata3: EH complete
> [ 1153.379063] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
> [ 1153.379269] sd 2:0:0:0: [sda] Write Protect is off
> [ 1153.379272] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 1153.379694] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 1183.570407] ata3.00: limiting speed to UDMA/100:PIO4
> [ 1183.570415] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> [ 1183.570493] ata3.00: cmd c8/00:08:8e:24:27/00:00:00:00:00/e1 tag 0
> dma 4096 in
> [ 1183.570495] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
> 0x4 (timeout)
> [ 1183.570576] ata3.00: status: { DRDY }
> [ 1183.570648] ata3: soft resetting link
> [ 1183.764233] ata3.00: configured for UDMA/100
> [ 1183.764243] ata3: EH complete
> [ 1183.776780] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
> [ 1183.777051] sd 2:0:0:0: [sda] Write Protect is off
> [ 1183.777055] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 1183.777602] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 1192.911301] [drm] Loading R300 Microcode
> [ 1214.362549] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> [ 1214.362560] ata3.00: cmd c8/00:08:2e:f3:7b/00:00:00:00:00/e0 tag 0
> dma 4096 in
> [ 1214.362562] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
> 0x4 (timeout)
> [ 1214.362566] ata3.00: status: { DRDY }
> [ 1214.362580] ata3: soft resetting link
> [ 1214.546911] ata3.00: configured for UDMA/100
> [ 1214.546922] ata3: EH complete
> [ 1214.559814] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
> [ 1214.559839] sd 2:0:0:0: [sda] Write Protect is off
> [ 1214.559843] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 1214.559869] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 1216.802968] [drm] Setting GART location based on new memory map
> [ 1216.803978] [drm] Loading R300 Microcode
> [ 1216.804074] [drm] writeback test succeeded in 2 usecs
> [ 1299.509565] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> [ 1299.509578] ata3.00: cmd ca/00:58:86:a1:77/00:00:00:00:00/e0 tag 0
> dma 45056 out
> [ 1299.509580] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
> 0x4 (timeout)
> [ 1299.509584] ata3.00: status: { DRDY }
> [ 1299.509598] ata3: soft resetting link
> [ 1299.690019] ata3.00: configured for UDMA/100
> [ 1299.690032] ata3: EH complete
> [ 1299.702833] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
> [ 1299.702858] sd 2:0:0:0: [sda] Write Protect is off
> [ 1299.702862] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 1299.702888] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 1394.623563] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> [ 1394.623576] ata3.00: cmd ca/00:58:7e:a9:77/00:00:00:00:00/e0 tag 0
> dma 45056 out
> [ 1394.623578] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask
> 0x4 (timeout)
> [ 1394.623582] ata3.00: status: { DRDY }
> [ 1399.658998] ata3: port is slow to respond, please be patient (Status 0x80)
> [ 1399.886793] ata3: soft resetting link
> [ 1400.067439] ata3.00: configured for UDMA/100
> [ 1400.067450] ata3: EH complete
> [ 1400.067907] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
> [ 1400.067930] sd 2:0:0:0: [sda] Write Protect is off
> [ 1400.067933] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 1400.067958] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
[ 1435.035055] ata3.00: status: { DRDY }
[ 1435.035069] ata3: soft resetting link
[ 1465.163780] ata3.00: qc timeout (cmd 0xec)
[ 1465.163790] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 1465.163794] ata3.00: revalidation failed (errno=-5)
[ 1465.163800] ata3: failed to recover some devices, retrying in 5 secs
[ 1471.226287] ata3: soft resetting link
[ 1471.411791] ata3.00: configured for UDMA/33
[ 1471.411810] ata3: EH complete
[ 1471.412276] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 1471.412499] sd 2:0:0:0: [sda] Write Protect is off
[ 1471.412503] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1471.413360] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
This seemed important as there is a failed operation and it looks
different then the other sets of messages
>
> I know that its a timeout(says dmesg and the wiki) issue because
> libata is probably waiting for an interrupt but doesn't get one, but
> freezing my system is not that fun, if theres any other info that I
> can provide to help me out and figure this out then let me know.
>
> -Stoyan G
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: ata error
2008-07-25 18:47 ` Stoyan Gaydarov
@ 2008-07-25 18:56 ` Alan Cox
2008-07-25 19:26 ` Stoyan Gaydarov
0 siblings, 1 reply; 4+ messages in thread
From: Alan Cox @ 2008-07-25 18:56 UTC (permalink / raw)
To: Stoyan Gaydarov; +Cc: linux-ide
> > [ 1078.735322] ata3.00: configured for UDMA/133
> > [ 1078.735336] ata3: EH complete
> > [ 1078.766066] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
We timed out, reset the drive and it came back.
> > [ 1078.766442] sd 2:0:0:0: [sda] Write Protect is off
> > [ 1078.766448] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
> > [ 1078.766957] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
> > enabled, doesn't support DPO or FUA
> > [ 1107.310768] [drm] Loading R300 Microcode
I notice there is a drm Loading R300 Microcode logged just before each
drive failure. That seems very suspicious to me. Does it ever occur if
you are not in X ?
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: ata error
2008-07-25 18:56 ` Alan Cox
@ 2008-07-25 19:26 ` Stoyan Gaydarov
0 siblings, 0 replies; 4+ messages in thread
From: Stoyan Gaydarov @ 2008-07-25 19:26 UTC (permalink / raw)
To: Alan Cox; +Cc: linux-ide
On Fri, Jul 25, 2008 at 1:56 PM, Alan Cox <alan@lxorguk.ukuu.org.uk> wrote:
>> > [ 1078.735322] ata3.00: configured for UDMA/133
>> > [ 1078.735336] ata3: EH complete
>> > [ 1078.766066] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
>
> We timed out, reset the drive and it came back.
>> > [ 1078.766442] sd 2:0:0:0: [sda] Write Protect is off
>> > [ 1078.766448] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> > [ 1078.766957] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
>> > enabled, doesn't support DPO or FUA
>> > [ 1107.310768] [drm] Loading R300 Microcode
>
> I notice there is a drm Loading R300 Microcode logged just before each
> drive failure. That seems very suspicious to me. Does it ever occur if
> you are not in X ?
I don't know but I can try it, later today.
What is happening is that the movie I am watching with vlc (stored on
the drive) stops playing and then the dmesg error comes up, and then
it ether freezes X which it did a couple of times but I didnt get the
dmesg because it was frozen and i wasnt expecting it, or I just need
to restart the movie and it plays again(the error stuff mentioned in
the dmesg above). Is there any other info I can provide you with?
-Stoyan G
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2008-07-25 19:26 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-07-25 18:43 ata error Stoyan Gaydarov
2008-07-25 18:47 ` Stoyan Gaydarov
2008-07-25 18:56 ` Alan Cox
2008-07-25 19:26 ` Stoyan Gaydarov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox