[PATCH 1/2] ata: libata-sata: Save all fields from sense data descriptor

[PATCH 1/2] ata: libata-sata: Save all fields from sense data descriptor

[Niklas Cassel]

When filling the taskfile result for a successful NCQ command, we use
the SDB FIS from the FIS Receive Area, see e.g. ahci_qc_ncq_fill_rtf().

However, the SDB FIS only has fields STATUS and ERROR.

For a successful NCQ command that has sense data, we will have a
successful sense data descriptor, in the Sense Data for Successful NCQ
Commands log.

Since we have access to additional taskfile result fields, fill in these
additional fields in qc->result_tf.

This matches how for failing/aborted NCQ commands, we will use e.g.
ahci_qc_fill_rtf() to fill in some fields, but then for the command that
actually caused the NCQ error, we will use ata_eh_read_log_10h(), which
provides additional fields, saving additional fields/overriding the
qc->result_tf that was fetched using ahci_qc_fill_rtf().

Fixes: 18bd7718b5c4 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
---
This is basically v3 of the patch that was previously sent out here:
https://lore.kernel.org/linux-ide/20250409084546.121694-2-cassel@kernel.org/

 drivers/ata/libata-sata.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index ba300cc0a3a3..2e4463d3a356 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -1510,6 +1510,8 @@ int ata_eh_get_ncq_success_sense(struct ata_link *link)
 	unsigned int err_mask, tag;
 	u8 *sense, sk = 0, asc = 0, ascq = 0;
 	u64 sense_valid, val;
+	u16 extended_sense;
+	bool aux_icc_valid;
 	int ret = 0;
 
 	err_mask = ata_read_log_page(dev, ATA_LOG_SENSE_NCQ, 0, buf, 2);
@@ -1529,6 +1531,8 @@ int ata_eh_get_ncq_success_sense(struct ata_link *link)
 
 	sense_valid = (u64)buf[8] | ((u64)buf[9] << 8) |
 		((u64)buf[10] << 16) | ((u64)buf[11] << 24);
+	extended_sense = get_unaligned_le16(&buf[14]);
+	aux_icc_valid = extended_sense & BIT(15);
 
 	ata_qc_for_each_raw(ap, qc, tag) {
 		if (!(qc->flags & ATA_QCFLAG_EH) ||
@@ -1556,6 +1560,17 @@ int ata_eh_get_ncq_success_sense(struct ata_link *link)
 			continue;
 		}
 
+		qc->result_tf.nsect = sense[6];
+		qc->result_tf.hob_nsect = sense[7];
+		qc->result_tf.lbal = sense[8];
+		qc->result_tf.lbam = sense[9];
+		qc->result_tf.lbah = sense[10];
+		qc->result_tf.hob_lbal = sense[11];
+		qc->result_tf.hob_lbam = sense[12];
+		qc->result_tf.hob_lbah = sense[13];
+		if (aux_icc_valid)
+			qc->result_tf.auxiliary = get_unaligned_le32(&sense[16]);
+
 		/* Set sense without also setting scsicmd->result */
 		scsi_build_sense_buffer(dev->flags & ATA_DFLAG_D_SENSE,
 					qc->scsicmd->sense_buffer, sk,
-- 
2.49.0

[PATCH 2/2] ata: libata-sata: Simplify sense_valid fetching

[Niklas Cassel]

While the sense_valid field is 47 bits according to the specification,
we are currently only fetching 32 bits, because these are the only
bits that represent the tags (0-31), which is all we care about.

Thus, replace the existing logic with a simple get_unaligned_le32().

Signed-off-by: Niklas Cassel <cassel@kernel.org>
---
 drivers/ata/libata-sata.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index 2e4463d3a356..5ba79a1053ea 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -1529,8 +1529,7 @@ int ata_eh_get_ncq_success_sense(struct ata_link *link)
 		return -EIO;
 	}
 
-	sense_valid = (u64)buf[8] | ((u64)buf[9] << 8) |
-		((u64)buf[10] << 16) | ((u64)buf[11] << 24);
+	sense_valid = get_unaligned_le32(&buf[8]);
 	extended_sense = get_unaligned_le16(&buf[14]);
 	aux_icc_valid = extended_sense & BIT(15);
 
-- 
2.49.0

Re: [PATCH 2/2] ata: libata-sata: Simplify sense_valid fetching

[Igor Pylypiv]

On Fri, Apr 11, 2025 at 03:25:24PM +0200, Niklas Cassel wrote:
> While the sense_valid field is 47 bits according to the specification,
> we are currently only fetching 32 bits, because these are the only
> bits that represent the tags (0-31), which is all we care about.
> 
> Thus, replace the existing logic with a simple get_unaligned_le32().
> 
> Signed-off-by: Niklas Cassel <cassel@kernel.org>
> ---
>  drivers/ata/libata-sata.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
> index 2e4463d3a356..5ba79a1053ea 100644
> --- a/drivers/ata/libata-sata.c
> +++ b/drivers/ata/libata-sata.c
> @@ -1529,8 +1529,7 @@ int ata_eh_get_ncq_success_sense(struct ata_link *link)
>  		return -EIO;
>  	}
>  
> -	sense_valid = (u64)buf[8] | ((u64)buf[9] << 8) |
> -		((u64)buf[10] << 16) | ((u64)buf[11] << 24);
> +	sense_valid = get_unaligned_le32(&buf[8]);

sense_valid is u64, should we update it to u32? We can also simplify
the sense_valid bit check to use the BIT() macro.

>  	extended_sense = get_unaligned_le16(&buf[14]);
>  	aux_icc_valid = extended_sense & BIT(15);
>  
> -- 
> 2.49.0
>

Thanks,
Igor

Re: [PATCH 2/2] ata: libata-sata: Simplify sense_valid fetching

[Hannes Reinecke]

On 4/11/25 15:25, Niklas Cassel wrote:
> While the sense_valid field is 47 bits according to the specification,
> we are currently only fetching 32 bits, because these are the only
> bits that represent the tags (0-31), which is all we care about.
> 
> Thus, replace the existing logic with a simple get_unaligned_le32().
> 
> Signed-off-by: Niklas Cassel <cassel@kernel.org>
> ---
>   drivers/ata/libata-sata.c | 3 +--
>   1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
> index 2e4463d3a356..5ba79a1053ea 100644
> --- a/drivers/ata/libata-sata.c
> +++ b/drivers/ata/libata-sata.c
> @@ -1529,8 +1529,7 @@ int ata_eh_get_ncq_success_sense(struct ata_link *link)
>   		return -EIO;
>   	}
>   
> -	sense_valid = (u64)buf[8] | ((u64)buf[9] << 8) |
> -		((u64)buf[10] << 16) | ((u64)buf[11] << 24);
> +	sense_valid = get_unaligned_le32(&buf[8]);
>   	extended_sense = get_unaligned_le16(&buf[14]);
>   	aux_icc_valid = extended_sense & BIT(15);
>   

Description is ever so misleading; we never fetched 47 bits to start
with. All we do is simplify the logic.
But whatever.

Reviewed-by: Hannes Reinecke <hare@suse.de>

Cheers,

Hannes
-- 
Dr. Hannes Reinecke                  Kernel Storage Architect
hare@suse.de                                +49 911 74053 688
SUSE Software Solutions GmbH, Frankenstr. 146, 90461 Nürnberg
HRB 36809 (AG Nürnberg), GF: I. Totev, A. McDonald, W. Knoblich

Re: [PATCH 2/2] ata: libata-sata: Simplify sense_valid fetching

[Niklas Cassel]

On Tue, Apr 15, 2025 at 08:51:46AM +0200, Hannes Reinecke wrote:
> On 4/11/25 15:25, Niklas Cassel wrote:
> > While the sense_valid field is 47 bits according to the specification,
> > we are currently only fetching 32 bits, because these are the only
> > bits that represent the tags (0-31), which is all we care about.
> > 
> > Thus, replace the existing logic with a simple get_unaligned_le32().
> > 
> > Signed-off-by: Niklas Cassel <cassel@kernel.org>
> > ---
> >   drivers/ata/libata-sata.c | 3 +--
> >   1 file changed, 1 insertion(+), 2 deletions(-)
> > 
> > diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
> > index 2e4463d3a356..5ba79a1053ea 100644
> > --- a/drivers/ata/libata-sata.c
> > +++ b/drivers/ata/libata-sata.c
> > @@ -1529,8 +1529,7 @@ int ata_eh_get_ncq_success_sense(struct ata_link *link)
> >   		return -EIO;
> >   	}
> > -	sense_valid = (u64)buf[8] | ((u64)buf[9] << 8) |
> > -		((u64)buf[10] << 16) | ((u64)buf[11] << 24);
> > +	sense_valid = get_unaligned_le32(&buf[8]);
> >   	extended_sense = get_unaligned_le16(&buf[14]);
> >   	aux_icc_valid = extended_sense & BIT(15);
> 
> Description is ever so misleading; we never fetched 47 bits to start
> with. All we do is simplify the logic.
> But whatever.

IMO, that is exactly what I wrote :)

Nevertheless, I clarified the commit message in V2.


Kind regards,
Niklas

Re: [PATCH 1/2] ata: libata-sata: Save all fields from sense data descriptor

[Igor Pylypiv]

On Fri, Apr 11, 2025 at 03:25:23PM +0200, Niklas Cassel wrote:
> When filling the taskfile result for a successful NCQ command, we use
> the SDB FIS from the FIS Receive Area, see e.g. ahci_qc_ncq_fill_rtf().
> 
> However, the SDB FIS only has fields STATUS and ERROR.
> 
> For a successful NCQ command that has sense data, we will have a
> successful sense data descriptor, in the Sense Data for Successful NCQ
> Commands log.
> 
> Since we have access to additional taskfile result fields, fill in these
> additional fields in qc->result_tf.
> 
> This matches how for failing/aborted NCQ commands, we will use e.g.
> ahci_qc_fill_rtf() to fill in some fields, but then for the command that
> actually caused the NCQ error, we will use ata_eh_read_log_10h(), which
> provides additional fields, saving additional fields/overriding the
> qc->result_tf that was fetched using ahci_qc_fill_rtf().
> 
> Fixes: 18bd7718b5c4 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD")
> Signed-off-by: Niklas Cassel <cassel@kernel.org>

Reviewed-by: Igor Pylypiv <ipylypiv@google.com>

Thanks,
Igor

Re: [PATCH 1/2] ata: libata-sata: Save all fields from sense data descriptor

[Hannes Reinecke]

On 4/11/25 15:25, Niklas Cassel wrote:
> When filling the taskfile result for a successful NCQ command, we use
> the SDB FIS from the FIS Receive Area, see e.g. ahci_qc_ncq_fill_rtf().
> 
> However, the SDB FIS only has fields STATUS and ERROR.
> 
> For a successful NCQ command that has sense data, we will have a
> successful sense data descriptor, in the Sense Data for Successful NCQ
> Commands log.
> 
> Since we have access to additional taskfile result fields, fill in these
> additional fields in qc->result_tf.
> 
> This matches how for failing/aborted NCQ commands, we will use e.g.
> ahci_qc_fill_rtf() to fill in some fields, but then for the command that
> actually caused the NCQ error, we will use ata_eh_read_log_10h(), which
> provides additional fields, saving additional fields/overriding the
> qc->result_tf that was fetched using ahci_qc_fill_rtf().
> 
> Fixes: 18bd7718b5c4 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD")
> Signed-off-by: Niklas Cassel <cassel@kernel.org>
> ---
> This is basically v3 of the patch that was previously sent out here:
> https://lore.kernel.org/linux-ide/20250409084546.121694-2-cassel@kernel.org/
> 
Reviewed-by: Hannes Reinecke <hare@suse.de>

Cheers,

Hannes
-- 
Dr. Hannes Reinecke                  Kernel Storage Architect
hare@suse.de                                +49 911 74053 688
SUSE Software Solutions GmbH, Frankenstr. 146, 90461 Nürnberg
HRB 36809 (AG Nürnberg), GF: I. Totev, A. McDonald, W. Knoblich