* [PATCH v4 0/1] iio: pulsedlight-lidar-lite: add runtime PM @ 2015-11-08 20:26 Matt Ranostay 2015-11-08 20:26 ` [PATCH v4 1/1] " Matt Ranostay 0 siblings, 1 reply; 6+ messages in thread From: Matt Ranostay @ 2015-11-08 20:26 UTC (permalink / raw) To: jic23; +Cc: linux-iio, linux-pm, k.kozlowski, Matt Ranostay Changes from v3: * readd pm_runtime_mark_last_busy() that got dropped accidently Matt Ranostay (1): iio: pulsedlight-lidar-lite: add runtime PM drivers/iio/proximity/pulsedlight-lidar-lite-v2.c | 54 ++++++++++++++++++++++- 1 file changed, 53 insertions(+), 1 deletion(-) -- 1.9.1 ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v4 1/1] iio: pulsedlight-lidar-lite: add runtime PM 2015-11-08 20:26 [PATCH v4 0/1] iio: pulsedlight-lidar-lite: add runtime PM Matt Ranostay @ 2015-11-08 20:26 ` Matt Ranostay 2015-11-08 23:58 ` Krzysztof Kozlowski 2015-11-10 12:26 ` Adriana Reus 0 siblings, 2 replies; 6+ messages in thread From: Matt Ranostay @ 2015-11-08 20:26 UTC (permalink / raw) To: jic23; +Cc: linux-iio, linux-pm, k.kozlowski, Matt Ranostay Add runtime PM support for the lidar-lite module to enable low power mode when last device requested reading is over a second. Signed-off-by: Matt Ranostay <mranostay@gmail.com> --- drivers/iio/proximity/pulsedlight-lidar-lite-v2.c | 54 ++++++++++++++++++++++- 1 file changed, 53 insertions(+), 1 deletion(-) diff --git a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c index 961f9f99..1a5481f 100644 --- a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c +++ b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c @@ -13,7 +13,7 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * TODO: runtime pm, interrupt mode, and signal strength reporting + * TODO: interrupt mode, and signal strength reporting */ #include <linux/err.h> @@ -21,6 +21,7 @@ #include <linux/i2c.h> #include <linux/delay.h> #include <linux/module.h> +#include <linux/pm_runtime.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> #include <linux/iio/buffer.h> @@ -37,6 +38,7 @@ #define LIDAR_REG_DATA_HBYTE 0x0f #define LIDAR_REG_DATA_LBYTE 0x10 +#define LIDAR_REG_PWR_CONTROL 0x65 #define LIDAR_DRV_NAME "lidar" @@ -90,6 +92,12 @@ static inline int lidar_write_control(struct lidar_data *data, int val) return i2c_smbus_write_byte_data(data->client, LIDAR_REG_CONTROL, val); } +static inline int lidar_write_power(struct lidar_data *data, int val) +{ + return i2c_smbus_write_byte_data(data->client, + LIDAR_REG_PWR_CONTROL, val); +} + static int lidar_read_measurement(struct lidar_data *data, u16 *reg) { int ret; @@ -116,6 +124,8 @@ static int lidar_get_measurement(struct lidar_data *data, u16 *reg) int tries = 10; int ret; + pm_runtime_get_sync(&client->dev); + /* start sample */ ret = lidar_write_control(data, LIDAR_REG_CONTROL_ACQUIRE); if (ret < 0) { @@ -144,6 +154,8 @@ static int lidar_get_measurement(struct lidar_data *data, u16 *reg) } ret = -EIO; } + pm_runtime_mark_last_busy(&client->dev); + pm_runtime_put_autosuspend(&client->dev); return ret; } @@ -243,6 +255,15 @@ static int lidar_probe(struct i2c_client *client, if (ret) goto error_unreg_buffer; + pm_runtime_set_autosuspend_delay(&client->dev, 1000); + pm_runtime_use_autosuspend(&client->dev); + + pm_runtime_set_active(&client->dev); + pm_runtime_enable(&client->dev); + + pm_runtime_mark_last_busy(&client->dev); + pm_runtime_idle(&client->dev); + return 0; error_unreg_buffer: @@ -258,6 +279,9 @@ static int lidar_remove(struct i2c_client *client) iio_device_unregister(indio_dev); iio_triggered_buffer_cleanup(indio_dev); + pm_runtime_disable(&client->dev); + pm_runtime_set_suspended(&client->dev); + return 0; } @@ -273,10 +297,38 @@ static const struct of_device_id lidar_dt_ids[] = { }; MODULE_DEVICE_TABLE(of, lidar_dt_ids); +#ifdef CONFIG_PM +static int lidar_pm_runtime_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct lidar_data *data = iio_priv(indio_dev); + + return lidar_write_power(data, 0x0f); +} + +static int lidar_pm_runtime_resume(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct lidar_data *data = iio_priv(indio_dev); + int ret = lidar_write_power(data, 0); + + /* regulator and FPGA needs settling time */ + usleep_range(15000, 20000); + + return ret; +} +#endif + +static const struct dev_pm_ops lidar_pm_ops = { + SET_RUNTIME_PM_OPS(lidar_pm_runtime_suspend, + lidar_pm_runtime_resume, NULL) +}; + static struct i2c_driver lidar_driver = { .driver = { .name = LIDAR_DRV_NAME, .of_match_table = of_match_ptr(lidar_dt_ids), + .pm = &lidar_pm_ops, }, .probe = lidar_probe, .remove = lidar_remove, -- 1.9.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v4 1/1] iio: pulsedlight-lidar-lite: add runtime PM 2015-11-08 20:26 ` [PATCH v4 1/1] " Matt Ranostay @ 2015-11-08 23:58 ` Krzysztof Kozlowski 2015-11-10 12:26 ` Adriana Reus 1 sibling, 0 replies; 6+ messages in thread From: Krzysztof Kozlowski @ 2015-11-08 23:58 UTC (permalink / raw) To: Matt Ranostay, jic23; +Cc: linux-iio, linux-pm On 09.11.2015 05:26, Matt Ranostay wrote: > Add runtime PM support for the lidar-lite module to enable low power > mode when last device requested reading is over a second. > > Signed-off-by: Matt Ranostay <mranostay@gmail.com> > --- > drivers/iio/proximity/pulsedlight-lidar-lite-v2.c | 54 ++++++++++++++++++++++- > 1 file changed, 53 insertions(+), 1 deletion(-) > Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Best regards, Krzysztof ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v4 1/1] iio: pulsedlight-lidar-lite: add runtime PM 2015-11-08 20:26 ` [PATCH v4 1/1] " Matt Ranostay 2015-11-08 23:58 ` Krzysztof Kozlowski @ 2015-11-10 12:26 ` Adriana Reus 2015-11-11 8:51 ` Matt Ranostay 1 sibling, 1 reply; 6+ messages in thread From: Adriana Reus @ 2015-11-10 12:26 UTC (permalink / raw) To: Matt Ranostay, jic23; +Cc: linux-iio, linux-pm, k.kozlowski On 08.11.2015 22:26, Matt Ranostay wrote: > Add runtime PM support for the lidar-lite module to enable low power > mode when last device requested reading is over a second. > > Signed-off-by: Matt Ranostay <mranostay@gmail.com> > --- > drivers/iio/proximity/pulsedlight-lidar-lite-v2.c | 54 ++++++++++++++++++++++- > 1 file changed, 53 insertions(+), 1 deletion(-) > > diff --git a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c > index 961f9f99..1a5481f 100644 > --- a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c > +++ b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c > @@ -13,7 +13,7 @@ > * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > * GNU General Public License for more details. > * > - * TODO: runtime pm, interrupt mode, and signal strength reporting > + * TODO: interrupt mode, and signal strength reporting > */ > > #include <linux/err.h> > @@ -21,6 +21,7 @@ > #include <linux/i2c.h> > #include <linux/delay.h> > #include <linux/module.h> > +#include <linux/pm_runtime.h> > #include <linux/iio/iio.h> > #include <linux/iio/sysfs.h> > #include <linux/iio/buffer.h> > @@ -37,6 +38,7 @@ > > #define LIDAR_REG_DATA_HBYTE 0x0f > #define LIDAR_REG_DATA_LBYTE 0x10 > +#define LIDAR_REG_PWR_CONTROL 0x65 > > #define LIDAR_DRV_NAME "lidar" > > @@ -90,6 +92,12 @@ static inline int lidar_write_control(struct lidar_data *data, int val) > return i2c_smbus_write_byte_data(data->client, LIDAR_REG_CONTROL, val); > } > > +static inline int lidar_write_power(struct lidar_data *data, int val) > +{ > + return i2c_smbus_write_byte_data(data->client, > + LIDAR_REG_PWR_CONTROL, val); > +} > + > static int lidar_read_measurement(struct lidar_data *data, u16 *reg) > { > int ret; > @@ -116,6 +124,8 @@ static int lidar_get_measurement(struct lidar_data *data, u16 *reg) > int tries = 10; > int ret; > > + pm_runtime_get_sync(&client->dev); > + > /* start sample */ > ret = lidar_write_control(data, LIDAR_REG_CONTROL_ACQUIRE); > if (ret < 0) { > @@ -144,6 +154,8 @@ static int lidar_get_measurement(struct lidar_data *data, u16 *reg) > } > ret = -EIO; > } > + pm_runtime_mark_last_busy(&client->dev); > + pm_runtime_put_autosuspend(&client->dev); > > return ret; > } > @@ -243,6 +255,15 @@ static int lidar_probe(struct i2c_client *client, > if (ret) > goto error_unreg_buffer; > > + pm_runtime_set_autosuspend_delay(&client->dev, 1000); > + pm_runtime_use_autosuspend(&client->dev); > + > + pm_runtime_set_active(&client->dev); pm_runtime_set_active ^ may return an error code. > + pm_runtime_enable(&client->dev); > + > + pm_runtime_mark_last_busy(&client->dev); > + pm_runtime_idle(&client->dev); > + > return 0; > > error_unreg_buffer: > @@ -258,6 +279,9 @@ static int lidar_remove(struct i2c_client *client) > iio_device_unregister(indio_dev); > iio_triggered_buffer_cleanup(indio_dev); > > + pm_runtime_disable(&client->dev); > + pm_runtime_set_suspended(&client->dev); > + > return 0; > } > > @@ -273,10 +297,38 @@ static const struct of_device_id lidar_dt_ids[] = { > }; > MODULE_DEVICE_TABLE(of, lidar_dt_ids); > > +#ifdef CONFIG_PM > +static int lidar_pm_runtime_suspend(struct device *dev) > +{ > + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); > + struct lidar_data *data = iio_priv(indio_dev); > + > + return lidar_write_power(data, 0x0f); > +} > + > +static int lidar_pm_runtime_resume(struct device *dev) > +{ > + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); > + struct lidar_data *data = iio_priv(indio_dev); > + int ret = lidar_write_power(data, 0); > + > + /* regulator and FPGA needs settling time */ > + usleep_range(15000, 20000); > + > + return ret; > +} > +#endif > + > +static const struct dev_pm_ops lidar_pm_ops = { > + SET_RUNTIME_PM_OPS(lidar_pm_runtime_suspend, > + lidar_pm_runtime_resume, NULL) > +}; > + > static struct i2c_driver lidar_driver = { > .driver = { > .name = LIDAR_DRV_NAME, > .of_match_table = of_match_ptr(lidar_dt_ids), > + .pm = &lidar_pm_ops, > }, > .probe = lidar_probe, > .remove = lidar_remove, > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v4 1/1] iio: pulsedlight-lidar-lite: add runtime PM 2015-11-10 12:26 ` Adriana Reus @ 2015-11-11 8:51 ` Matt Ranostay 2015-11-15 10:46 ` Jonathan Cameron 0 siblings, 1 reply; 6+ messages in thread From: Matt Ranostay @ 2015-11-11 8:51 UTC (permalink / raw) To: Adriana Reus Cc: Jonathan Cameron, linux-iio@vger.kernel.org, linux-pm, Krzysztof Kozłowski On Tue, Nov 10, 2015 at 4:26 AM, Adriana Reus <adriana.reus@intel.com> wrote: > > > On 08.11.2015 22:26, Matt Ranostay wrote: >> >> Add runtime PM support for the lidar-lite module to enable low power >> mode when last device requested reading is over a second. >> >> Signed-off-by: Matt Ranostay <mranostay@gmail.com> >> --- >> drivers/iio/proximity/pulsedlight-lidar-lite-v2.c | 54 >> ++++++++++++++++++++++- >> 1 file changed, 53 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c >> b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c >> index 961f9f99..1a5481f 100644 >> --- a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c >> +++ b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c >> @@ -13,7 +13,7 @@ >> * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> * GNU General Public License for more details. >> * >> - * TODO: runtime pm, interrupt mode, and signal strength reporting >> + * TODO: interrupt mode, and signal strength reporting >> */ >> >> #include <linux/err.h> >> @@ -21,6 +21,7 @@ >> #include <linux/i2c.h> >> #include <linux/delay.h> >> #include <linux/module.h> >> +#include <linux/pm_runtime.h> >> #include <linux/iio/iio.h> >> #include <linux/iio/sysfs.h> >> #include <linux/iio/buffer.h> >> @@ -37,6 +38,7 @@ >> >> #define LIDAR_REG_DATA_HBYTE 0x0f >> #define LIDAR_REG_DATA_LBYTE 0x10 >> +#define LIDAR_REG_PWR_CONTROL 0x65 >> >> #define LIDAR_DRV_NAME "lidar" >> >> @@ -90,6 +92,12 @@ static inline int lidar_write_control(struct lidar_data >> *data, int val) >> return i2c_smbus_write_byte_data(data->client, LIDAR_REG_CONTROL, >> val); >> } >> >> +static inline int lidar_write_power(struct lidar_data *data, int val) >> +{ >> + return i2c_smbus_write_byte_data(data->client, >> + LIDAR_REG_PWR_CONTROL, val); >> +} >> + >> static int lidar_read_measurement(struct lidar_data *data, u16 *reg) >> { >> int ret; >> @@ -116,6 +124,8 @@ static int lidar_get_measurement(struct lidar_data >> *data, u16 *reg) >> int tries = 10; >> int ret; >> >> + pm_runtime_get_sync(&client->dev); >> + >> /* start sample */ >> ret = lidar_write_control(data, LIDAR_REG_CONTROL_ACQUIRE); >> if (ret < 0) { >> @@ -144,6 +154,8 @@ static int lidar_get_measurement(struct lidar_data >> *data, u16 *reg) >> } >> ret = -EIO; >> } >> + pm_runtime_mark_last_busy(&client->dev); >> + pm_runtime_put_autosuspend(&client->dev); >> >> return ret; >> } >> @@ -243,6 +255,15 @@ static int lidar_probe(struct i2c_client *client, >> if (ret) >> goto error_unreg_buffer; >> >> + pm_runtime_set_autosuspend_delay(&client->dev, 1000); >> + pm_runtime_use_autosuspend(&client->dev); >> + >> + pm_runtime_set_active(&client->dev); > > pm_runtime_set_active ^ may return an error code. Ah true. But is the return value really needed in this case? > >> + pm_runtime_enable(&client->dev); >> + >> + pm_runtime_mark_last_busy(&client->dev); >> + pm_runtime_idle(&client->dev); >> + >> return 0; >> >> error_unreg_buffer: >> @@ -258,6 +279,9 @@ static int lidar_remove(struct i2c_client *client) >> iio_device_unregister(indio_dev); >> iio_triggered_buffer_cleanup(indio_dev); >> >> + pm_runtime_disable(&client->dev); >> + pm_runtime_set_suspended(&client->dev); >> + >> return 0; >> } >> >> @@ -273,10 +297,38 @@ static const struct of_device_id lidar_dt_ids[] = { >> }; >> MODULE_DEVICE_TABLE(of, lidar_dt_ids); >> >> +#ifdef CONFIG_PM >> +static int lidar_pm_runtime_suspend(struct device *dev) >> +{ >> + struct iio_dev *indio_dev = >> i2c_get_clientdata(to_i2c_client(dev)); >> + struct lidar_data *data = iio_priv(indio_dev); >> + >> + return lidar_write_power(data, 0x0f); >> +} >> + >> +static int lidar_pm_runtime_resume(struct device *dev) >> +{ >> + struct iio_dev *indio_dev = >> i2c_get_clientdata(to_i2c_client(dev)); >> + struct lidar_data *data = iio_priv(indio_dev); >> + int ret = lidar_write_power(data, 0); >> + >> + /* regulator and FPGA needs settling time */ >> + usleep_range(15000, 20000); >> + >> + return ret; >> +} >> +#endif >> + >> +static const struct dev_pm_ops lidar_pm_ops = { >> + SET_RUNTIME_PM_OPS(lidar_pm_runtime_suspend, >> + lidar_pm_runtime_resume, NULL) >> +}; >> + >> static struct i2c_driver lidar_driver = { >> .driver = { >> .name = LIDAR_DRV_NAME, >> .of_match_table = of_match_ptr(lidar_dt_ids), >> + .pm = &lidar_pm_ops, >> }, >> .probe = lidar_probe, >> .remove = lidar_remove, >> > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v4 1/1] iio: pulsedlight-lidar-lite: add runtime PM 2015-11-11 8:51 ` Matt Ranostay @ 2015-11-15 10:46 ` Jonathan Cameron 0 siblings, 0 replies; 6+ messages in thread From: Jonathan Cameron @ 2015-11-15 10:46 UTC (permalink / raw) To: Matt Ranostay, Adriana Reus Cc: linux-iio@vger.kernel.org, linux-pm, Krzysztof Kozłowski On 11/11/15 08:51, Matt Ranostay wrote: > On Tue, Nov 10, 2015 at 4:26 AM, Adriana Reus <adriana.reus@intel.com> wrote: >> >> >> On 08.11.2015 22:26, Matt Ranostay wrote: >>> >>> Add runtime PM support for the lidar-lite module to enable low power >>> mode when last device requested reading is over a second. >>> >>> Signed-off-by: Matt Ranostay <mranostay@gmail.com> >>> --- >>> drivers/iio/proximity/pulsedlight-lidar-lite-v2.c | 54 >>> ++++++++++++++++++++++- >>> 1 file changed, 53 insertions(+), 1 deletion(-) >>> >>> diff --git a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c >>> b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c >>> index 961f9f99..1a5481f 100644 >>> --- a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c >>> +++ b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c >>> @@ -13,7 +13,7 @@ >>> * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >>> * GNU General Public License for more details. >>> * >>> - * TODO: runtime pm, interrupt mode, and signal strength reporting >>> + * TODO: interrupt mode, and signal strength reporting >>> */ >>> >>> #include <linux/err.h> >>> @@ -21,6 +21,7 @@ >>> #include <linux/i2c.h> >>> #include <linux/delay.h> >>> #include <linux/module.h> >>> +#include <linux/pm_runtime.h> >>> #include <linux/iio/iio.h> >>> #include <linux/iio/sysfs.h> >>> #include <linux/iio/buffer.h> >>> @@ -37,6 +38,7 @@ >>> >>> #define LIDAR_REG_DATA_HBYTE 0x0f >>> #define LIDAR_REG_DATA_LBYTE 0x10 >>> +#define LIDAR_REG_PWR_CONTROL 0x65 >>> >>> #define LIDAR_DRV_NAME "lidar" >>> >>> @@ -90,6 +92,12 @@ static inline int lidar_write_control(struct lidar_data >>> *data, int val) >>> return i2c_smbus_write_byte_data(data->client, LIDAR_REG_CONTROL, >>> val); >>> } >>> >>> +static inline int lidar_write_power(struct lidar_data *data, int val) >>> +{ >>> + return i2c_smbus_write_byte_data(data->client, >>> + LIDAR_REG_PWR_CONTROL, val); >>> +} >>> + >>> static int lidar_read_measurement(struct lidar_data *data, u16 *reg) >>> { >>> int ret; >>> @@ -116,6 +124,8 @@ static int lidar_get_measurement(struct lidar_data >>> *data, u16 *reg) >>> int tries = 10; >>> int ret; >>> >>> + pm_runtime_get_sync(&client->dev); >>> + >>> /* start sample */ >>> ret = lidar_write_control(data, LIDAR_REG_CONTROL_ACQUIRE); >>> if (ret < 0) { >>> @@ -144,6 +154,8 @@ static int lidar_get_measurement(struct lidar_data >>> *data, u16 *reg) >>> } >>> ret = -EIO; >>> } >>> + pm_runtime_mark_last_busy(&client->dev); >>> + pm_runtime_put_autosuspend(&client->dev); >>> >>> return ret; >>> } >>> @@ -243,6 +255,15 @@ static int lidar_probe(struct i2c_client *client, >>> if (ret) >>> goto error_unreg_buffer; >>> >>> + pm_runtime_set_autosuspend_delay(&client->dev, 1000); >>> + pm_runtime_use_autosuspend(&client->dev); >>> + >>> + pm_runtime_set_active(&client->dev); >> >> pm_runtime_set_active ^ may return an error code. > > Ah true. But is the return value really needed in this case? Why would it not be? Something in the probe routine failed, the driver should fail to probe... If it is possible to muddle through, then you want to explicitly make that clear by handling the error and perhaps outputting a warning... J > >> >>> + pm_runtime_enable(&client->dev); >>> + >>> + pm_runtime_mark_last_busy(&client->dev); >>> + pm_runtime_idle(&client->dev); >>> + >>> return 0; >>> >>> error_unreg_buffer: >>> @@ -258,6 +279,9 @@ static int lidar_remove(struct i2c_client *client) >>> iio_device_unregister(indio_dev); >>> iio_triggered_buffer_cleanup(indio_dev); >>> >>> + pm_runtime_disable(&client->dev); >>> + pm_runtime_set_suspended(&client->dev); >>> + >>> return 0; >>> } >>> >>> @@ -273,10 +297,38 @@ static const struct of_device_id lidar_dt_ids[] = { >>> }; >>> MODULE_DEVICE_TABLE(of, lidar_dt_ids); >>> >>> +#ifdef CONFIG_PM >>> +static int lidar_pm_runtime_suspend(struct device *dev) >>> +{ >>> + struct iio_dev *indio_dev = >>> i2c_get_clientdata(to_i2c_client(dev)); >>> + struct lidar_data *data = iio_priv(indio_dev); >>> + >>> + return lidar_write_power(data, 0x0f); >>> +} >>> + >>> +static int lidar_pm_runtime_resume(struct device *dev) >>> +{ >>> + struct iio_dev *indio_dev = >>> i2c_get_clientdata(to_i2c_client(dev)); >>> + struct lidar_data *data = iio_priv(indio_dev); >>> + int ret = lidar_write_power(data, 0); >>> + >>> + /* regulator and FPGA needs settling time */ >>> + usleep_range(15000, 20000); >>> + >>> + return ret; >>> +} >>> +#endif >>> + >>> +static const struct dev_pm_ops lidar_pm_ops = { >>> + SET_RUNTIME_PM_OPS(lidar_pm_runtime_suspend, >>> + lidar_pm_runtime_resume, NULL) >>> +}; >>> + >>> static struct i2c_driver lidar_driver = { >>> .driver = { >>> .name = LIDAR_DRV_NAME, >>> .of_match_table = of_match_ptr(lidar_dt_ids), >>> + .pm = &lidar_pm_ops, >>> }, >>> .probe = lidar_probe, >>> .remove = lidar_remove, >>> >> ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2015-11-15 10:46 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2015-11-08 20:26 [PATCH v4 0/1] iio: pulsedlight-lidar-lite: add runtime PM Matt Ranostay 2015-11-08 20:26 ` [PATCH v4 1/1] " Matt Ranostay 2015-11-08 23:58 ` Krzysztof Kozlowski 2015-11-10 12:26 ` Adriana Reus 2015-11-11 8:51 ` Matt Ranostay 2015-11-15 10:46 ` Jonathan Cameron
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox