From: Arushi Singhal <arushisinghal19971997@gmail.com>
To: lars@metafoo.de
Cc: Michael Hennerich <Michael.Hennerich@analog.com>,
Jonathan Cameron <jic23@kernel.org>,
Hartmut Knaack <knaack.h@gmx.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-iio@vger.kernel.org, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org, outreachy-kernel@googlegroups.com
Subject: [PATCH v2] staging: iio: Replace a bit shift by a use of BIT.
Date: Wed, 22 Mar 2017 22:12:34 +0530 [thread overview]
Message-ID: <20170322164234.GA18805@arushi-HP-Pavilion-Notebook> (raw)
This patch replaces bit shifting on 1 with the BIT(x) macro.
This was done with coccinelle:
@@
constant c;
@@
-1 << c
+BIT(c)
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
---
changes in v2
-remove/correct the wrong code.
drivers/staging/iio/cdc/ad7150.c | 2 +-
drivers/staging/iio/cdc/ad7746.c | 16 ++++++++--------
2 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/staging/iio/cdc/ad7150.c b/drivers/staging/iio/cdc/ad7150.c
index ca72af3e9d4b..a6f249e9c1e1 100644
--- a/drivers/staging/iio/cdc/ad7150.c
+++ b/drivers/staging/iio/cdc/ad7150.c
@@ -232,7 +232,7 @@ static int ad7150_write_event_config(struct iio_dev *indio_dev,
if (ret < 0)
goto error_ret;
- cfg = ret & ~((0x03 << 5) | (0x1 << 7));
+ cfg = ret & ~((0x03 << 5) | BIT(7));
switch (type) {
case IIO_EV_TYPE_MAG_ADAPTIVE:
diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/staging/iio/cdc/ad7746.c
index 81f8b9ee1120..453d3978879d 100644
--- a/drivers/staging/iio/cdc/ad7746.c
+++ b/drivers/staging/iio/cdc/ad7746.c
@@ -45,10 +45,10 @@
#define AD7746_STATUS_RDYCAP BIT(0)
/* Capacitive Channel Setup Register Bit Designations (AD7746_REG_CAP_SETUP) */
-#define AD7746_CAPSETUP_CAPEN (1 << 7)
-#define AD7746_CAPSETUP_CIN2 (1 << 6) /* AD7746 only */
-#define AD7746_CAPSETUP_CAPDIFF (1 << 5)
-#define AD7746_CAPSETUP_CACHOP (1 << 0)
+#define AD7746_CAPSETUP_CAPEN (BIT(7))
+#define AD7746_CAPSETUP_CIN2 (BIT(6)) /* AD7746 only */
+#define AD7746_CAPSETUP_CAPDIFF (BIT(5))
+#define AD7746_CAPSETUP_CACHOP (BIT(0))
/* Voltage/Temperature Setup Register Bit Designations (AD7746_REG_VT_SETUP) */
#define AD7746_VTSETUP_VTEN (1 << 7)
@@ -56,9 +56,9 @@
#define AD7746_VTSETUP_VTMD_EXT_TEMP (1 << 5)
#define AD7746_VTSETUP_VTMD_VDD_MON (2 << 5)
#define AD7746_VTSETUP_VTMD_EXT_VIN (3 << 5)
-#define AD7746_VTSETUP_EXTREF (1 << 4)
-#define AD7746_VTSETUP_VTSHORT (1 << 1)
-#define AD7746_VTSETUP_VTCHOP (1 << 0)
+#define AD7746_VTSETUP_EXTREF (BIT(4))
+#define AD7746_VTSETUP_VTSHORT (BIT(1))
+#define AD7746_VTSETUP_VTCHOP (BIT(0))
/* Excitation Setup Register Bit Designations (AD7746_REG_EXC_SETUP) */
#define AD7746_EXCSETUP_CLKCTRL BIT(7)
@@ -82,7 +82,7 @@
#define AD7746_CONF_MODE_GAIN_CAL (6 << 0)
/* CAPDAC Register Bit Designations (AD7746_REG_CAPDACx) */
-#define AD7746_CAPDAC_DACEN (1 << 7)
+#define AD7746_CAPDAC_DACEN (BIT(7))
#define AD7746_CAPDAC_DACP(x) ((x) & 0x7F)
/*
--
2.11.0
next reply other threads:[~2017-03-22 16:42 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-22 16:42 Arushi Singhal [this message]
2017-03-22 19:30 ` [PATCH v2] staging: iio: Replace a bit shift by a use of BIT Jonathan Cameron
2017-03-22 21:44 ` [Outreachy kernel] " Julia Lawall
2017-03-23 9:31 ` Dan Carpenter
-- strict thread matches above, loose matches on Subject: below --
2017-03-22 8:38 Arushi Singhal
2017-03-22 11:37 ` Lars-Peter Clausen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170322164234.GA18805@arushi-HP-Pavilion-Notebook \
--to=arushisinghal19971997@gmail.com \
--cc=Michael.Hennerich@analog.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=outreachy-kernel@googlegroups.com \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox