From: Julia Lawall <julia.lawall@lip6.fr>
To: Arushi Singhal <arushisinghal19971997@gmail.com>
Cc: lars@metafoo.de, Michael Hennerich <Michael.Hennerich@analog.com>,
Jonathan Cameron <jic23@kernel.org>,
Hartmut Knaack <knaack.h@gmx.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-iio@vger.kernel.org, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org, outreachy-kernel@googlegroups.com
Subject: Re: [Outreachy kernel] [PATCH v2] staging: iio: Replace a bit shift by a use of BIT.
Date: Wed, 22 Mar 2017 22:44:28 +0100 (CET) [thread overview]
Message-ID: <alpine.DEB.2.20.1703222243450.2132@hadrien> (raw)
In-Reply-To: <20170322164234.GA18805@arushi-HP-Pavilion-Notebook>
On Wed, 22 Mar 2017, Arushi Singhal wrote:
> This patch replaces bit shifting on 1 with the BIT(x) macro.
> This was done with coccinelle:
> @@
> constant c;
> @@
>
> -1 << c
> +BIT(c)
>
> Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
> ---
> changes in v2
> -remove/correct the wrong code.
>
> drivers/staging/iio/cdc/ad7150.c | 2 +-
> drivers/staging/iio/cdc/ad7746.c | 16 ++++++++--------
> 2 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/staging/iio/cdc/ad7150.c b/drivers/staging/iio/cdc/ad7150.c
> index ca72af3e9d4b..a6f249e9c1e1 100644
> --- a/drivers/staging/iio/cdc/ad7150.c
> +++ b/drivers/staging/iio/cdc/ad7150.c
> @@ -232,7 +232,7 @@ static int ad7150_write_event_config(struct iio_dev *indio_dev,
> if (ret < 0)
> goto error_ret;
>
> - cfg = ret & ~((0x03 << 5) | (0x1 << 7));
> + cfg = ret & ~((0x03 << 5) | BIT(7));
>
> switch (type) {
> case IIO_EV_TYPE_MAG_ADAPTIVE:
> diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/staging/iio/cdc/ad7746.c
> index 81f8b9ee1120..453d3978879d 100644
> --- a/drivers/staging/iio/cdc/ad7746.c
> +++ b/drivers/staging/iio/cdc/ad7746.c
> @@ -45,10 +45,10 @@
> #define AD7746_STATUS_RDYCAP BIT(0)
>
> /* Capacitive Channel Setup Register Bit Designations (AD7746_REG_CAP_SETUP) */
> -#define AD7746_CAPSETUP_CAPEN (1 << 7)
> -#define AD7746_CAPSETUP_CIN2 (1 << 6) /* AD7746 only */
> -#define AD7746_CAPSETUP_CAPDIFF (1 << 5)
> -#define AD7746_CAPSETUP_CACHOP (1 << 0)
> +#define AD7746_CAPSETUP_CAPEN (BIT(7))
> +#define AD7746_CAPSETUP_CIN2 (BIT(6)) /* AD7746 only */
> +#define AD7746_CAPSETUP_CAPDIFF (BIT(5))
> +#define AD7746_CAPSETUP_CACHOP (BIT(0))
The parentheses here are not needed.
>
> /* Voltage/Temperature Setup Register Bit Designations (AD7746_REG_VT_SETUP) */
> #define AD7746_VTSETUP_VTEN (1 << 7)
> @@ -56,9 +56,9 @@
> #define AD7746_VTSETUP_VTMD_EXT_TEMP (1 << 5)
> #define AD7746_VTSETUP_VTMD_VDD_MON (2 << 5)
> #define AD7746_VTSETUP_VTMD_EXT_VIN (3 << 5)
> -#define AD7746_VTSETUP_EXTREF (1 << 4)
> -#define AD7746_VTSETUP_VTSHORT (1 << 1)
> -#define AD7746_VTSETUP_VTCHOP (1 << 0)
> +#define AD7746_VTSETUP_EXTREF (BIT(4))
> +#define AD7746_VTSETUP_VTSHORT (BIT(1))
> +#define AD7746_VTSETUP_VTCHOP (BIT(0))
>
Same here.
> /* Excitation Setup Register Bit Designations (AD7746_REG_EXC_SETUP) */
> #define AD7746_EXCSETUP_CLKCTRL BIT(7)
> @@ -82,7 +82,7 @@
> #define AD7746_CONF_MODE_GAIN_CAL (6 << 0)
>
> /* CAPDAC Register Bit Designations (AD7746_REG_CAPDACx) */
> -#define AD7746_CAPDAC_DACEN (1 << 7)
> +#define AD7746_CAPDAC_DACEN (BIT(7))
Here too.
julia
> #define AD7746_CAPDAC_DACP(x) ((x) & 0x7F)
>
> /*
> --
> 2.11.0
>
> --
> You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@googlegroups.com.
> To post to this group, send email to outreachy-kernel@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/20170322164234.GA18805%40arushi-HP-Pavilion-Notebook.
> For more options, visit https://groups.google.com/d/optout.
>
next prev parent reply other threads:[~2017-03-22 21:44 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-22 16:42 [PATCH v2] staging: iio: Replace a bit shift by a use of BIT Arushi Singhal
2017-03-22 19:30 ` Jonathan Cameron
2017-03-22 21:44 ` Julia Lawall [this message]
2017-03-23 9:31 ` Dan Carpenter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.DEB.2.20.1703222243450.2132@hadrien \
--to=julia.lawall@lip6.fr \
--cc=Michael.Hennerich@analog.com \
--cc=arushisinghal19971997@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=outreachy-kernel@googlegroups.com \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox