[PATCH v2 0/4] Add OF support to ST sensor framework

[PATCH v2 0/4] Add OF support to ST sensor framework

[Lorenzo Bianconi]

Changes since v1:
- add missing devices to {accel, magn, gyro, press} of_device_id table

Lorenzo Bianconi (4):
  iio: accel: st_accel_spi: add OF capability to st_accel_spi
  iio: magnetometer: st_magn_spi: add OF capability to st_magn_spi
  iio: gyro: st_gyro_spi: add OF capability to st_gyro_spi
  iio: pressure: st_pressure_spi: add OF capability to st_pressure_spi

 drivers/iio/accel/st_accel_spi.c       | 67 ++++++++++++++++++++++++++++++----
 drivers/iio/gyro/st_gyro_spi.c         | 53 +++++++++++++++++++++++++++
 drivers/iio/magnetometer/st_magn_spi.c | 25 +++++++++++++
 drivers/iio/pressure/st_pressure_spi.c | 33 +++++++++++++++++
 4 files changed, 170 insertions(+), 8 deletions(-)

-- 
2.13.1

[PATCH v2 1/4] iio: accel: st_accel_spi: add OF capability to st_accel_spi

[Lorenzo Bianconi]

Add device tree support for LIS3DH, LSM330D, LSM330DL, LSM330DLC,
LIS331DLH, LSM330, LSM303AGR, LIS2DH12, LIS3L02DQ, LNG2DM accel sensors.

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
---
 drivers/iio/accel/st_accel_spi.c | 67 +++++++++++++++++++++++++++++++++++-----
 1 file changed, 59 insertions(+), 8 deletions(-)

diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
index d13742edee0e..a8b61daa83d7 100644
--- a/drivers/iio/accel/st_accel_spi.c
+++ b/drivers/iio/accel/st_accel_spi.c
@@ -18,6 +18,63 @@
 #include <linux/iio/common/st_sensors_spi.h>
 #include "st_accel.h"
 
+#ifdef CONFIG_OF
+/*
+ * For new single-chip sensors use <device_name> as compatible string.
+ * For old single-chip devices keep <device_name>-accel to maintain
+ * compatibility
+ */
+static const struct of_device_id st_accel_of_match[] = {
+	{
+		.compatible = "st,lis302dl-spi"
+	},
+	{
+		.compatible = "st,lis3dh-accel",
+		.data = LIS3DH_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330d-accel",
+		.data = LSM330D_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330dl-accel",
+		.data = LSM330DL_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330dlc-accel",
+		.data = LSM330DLC_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lis331dlh-accel",
+		.data = LIS331DLH_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330-accel",
+		.data = LSM330_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm303agr-accel",
+		.data = LSM303AGR_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lis2dh12-accel",
+		.data = LIS2DH12_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lis3l02dq",
+		.data = LIS3L02DQ_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lng2dm-accel",
+		.data = LNG2DM_ACCEL_DEV_NAME,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, st_accel_of_match);
+#else
+#define st_accel_of_match	NULL
+#endif
+
 static int st_accel_spi_probe(struct spi_device *spi)
 {
 	struct iio_dev *indio_dev;
@@ -30,6 +87,8 @@ static int st_accel_spi_probe(struct spi_device *spi)
 
 	adata = iio_priv(indio_dev);
 
+	st_sensors_of_name_probe(&spi->dev, st_accel_of_match,
+				 spi->modalias, sizeof(spi->modalias));
 	st_sensors_spi_configure(indio_dev, spi, adata);
 
 	err = st_accel_common_probe(indio_dev);
@@ -61,14 +120,6 @@ static const struct spi_device_id st_accel_id_table[] = {
 };
 MODULE_DEVICE_TABLE(spi, st_accel_id_table);
 
-#ifdef CONFIG_OF
-static const struct of_device_id st_accel_of_match[] = {
-	{ .compatible = "st,lis302dl-spi" },
-	{}
-};
-MODULE_DEVICE_TABLE(of, st_accel_of_match);
-#endif
-
 static struct spi_driver st_accel_driver = {
 	.driver = {
 		.name = "st-accel-spi",
-- 
2.13.1

Re: [PATCH v2 1/4] iio: accel: st_accel_spi: add OF capability to st_accel_spi

[Jonathan Cameron]

On Sun, 25 Jun 2017 17:24:10 +0200
Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> wrote:

> Add device tree support for LIS3DH, LSM330D, LSM330DL, LSM330DLC,
> LIS331DLH, LSM330, LSM303AGR, LIS2DH12, LIS3L02DQ, LNG2DM accel sensors.
> 
> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
> ---
>  drivers/iio/accel/st_accel_spi.c | 67 +++++++++++++++++++++++++++++++++++-----
>  1 file changed, 59 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
> index d13742edee0e..a8b61daa83d7 100644
> --- a/drivers/iio/accel/st_accel_spi.c
> +++ b/drivers/iio/accel/st_accel_spi.c
> @@ -18,6 +18,63 @@
>  #include <linux/iio/common/st_sensors_spi.h>
>  #include "st_accel.h"
>  
> +#ifdef CONFIG_OF
> +/*
> + * For new single-chip sensors use <device_name> as compatible string.
> + * For old single-chip devices keep <device_name>-accel to maintain
> + * compatibility
> + */
> +static const struct of_device_id st_accel_of_match[] = {
> +	{
> +		.compatible = "st,lis302dl-spi"
Leaving this without some explanation of why it doesn't have
.data set requires a comment at least. It will result
in the name never being set - or ending up as
the default spi->modalias anyway.. Presumably not what is
desired?

If I have missed something about why this works, please
add a comment here in v3 to explain it.
> +	},
> +	{
> +		.compatible = "st,lis3dh-accel",
> +		.data = LIS3DH_ACCEL_DEV_NAME,
> +	},
> +	{
> +		.compatible = "st,lsm330d-accel",
> +		.data = LSM330D_ACCEL_DEV_NAME,
> +	},
> +	{
> +		.compatible = "st,lsm330dl-accel",
> +		.data = LSM330DL_ACCEL_DEV_NAME,
> +	},
> +	{
> +		.compatible = "st,lsm330dlc-accel",
> +		.data = LSM330DLC_ACCEL_DEV_NAME,
> +	},
> +	{
> +		.compatible = "st,lis331dlh-accel",
> +		.data = LIS331DLH_ACCEL_DEV_NAME,
> +	},
> +	{
> +		.compatible = "st,lsm330-accel",
> +		.data = LSM330_ACCEL_DEV_NAME,
> +	},
> +	{
> +		.compatible = "st,lsm303agr-accel",
> +		.data = LSM303AGR_ACCEL_DEV_NAME,
> +	},
> +	{
> +		.compatible = "st,lis2dh12-accel",
> +		.data = LIS2DH12_ACCEL_DEV_NAME,
> +	},
> +	{
> +		.compatible = "st,lis3l02dq",
> +		.data = LIS3L02DQ_ACCEL_DEV_NAME,
> +	},
> +	{
> +		.compatible = "st,lng2dm-accel",
> +		.data = LNG2DM_ACCEL_DEV_NAME,
> +	},
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, st_accel_of_match);
> +#else
> +#define st_accel_of_match	NULL
> +#endif
> +
>  static int st_accel_spi_probe(struct spi_device *spi)
>  {
>  	struct iio_dev *indio_dev;
> @@ -30,6 +87,8 @@ static int st_accel_spi_probe(struct spi_device *spi)
>  
>  	adata = iio_priv(indio_dev);
>  
> +	st_sensors_of_name_probe(&spi->dev, st_accel_of_match,
> +				 spi->modalias, sizeof(spi->modalias));
>  	st_sensors_spi_configure(indio_dev, spi, adata);
>  
>  	err = st_accel_common_probe(indio_dev);
> @@ -61,14 +120,6 @@ static const struct spi_device_id st_accel_id_table[] = {
>  };
>  MODULE_DEVICE_TABLE(spi, st_accel_id_table);
>  
> -#ifdef CONFIG_OF
> -static const struct of_device_id st_accel_of_match[] = {
> -	{ .compatible = "st,lis302dl-spi" },
> -	{}
> -};
> -MODULE_DEVICE_TABLE(of, st_accel_of_match);
> -#endif
> -
>  static struct spi_driver st_accel_driver = {
>  	.driver = {
>  		.name = "st-accel-spi",

Re: [PATCH v2 1/4] iio: accel: st_accel_spi: add OF capability to st_accel_spi

[Lorenzo Bianconi]

> On Sun, 25 Jun 2017 17:24:10 +0200
> Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> wrote:
>
>> Add device tree support for LIS3DH, LSM330D, LSM330DL, LSM330DLC,
>> LIS331DLH, LSM330, LSM303AGR, LIS2DH12, LIS3L02DQ, LNG2DM accel sensors.
>>
>> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
>> ---
>>  drivers/iio/accel/st_accel_spi.c | 67 +++++++++++++++++++++++++++++++++++-----
>>  1 file changed, 59 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
>> index d13742edee0e..a8b61daa83d7 100644
>> --- a/drivers/iio/accel/st_accel_spi.c
>> +++ b/drivers/iio/accel/st_accel_spi.c
>> @@ -18,6 +18,63 @@
>>  #include <linux/iio/common/st_sensors_spi.h>
>>  #include "st_accel.h"
>>
>> +#ifdef CONFIG_OF
>> +/*
>> + * For new single-chip sensors use <device_name> as compatible string.
>> + * For old single-chip devices keep <device_name>-accel to maintain
>> + * compatibility
>> + */
>> +static const struct of_device_id st_accel_of_match[] = {
>> +     {
>> +             .compatible = "st,lis302dl-spi"
> Leaving this without some explanation of why it doesn't have
> .data set requires a comment at least. It will result
> in the name never being set - or ending up as
> the default spi->modalias anyway.. Presumably not what is
> desired?
>
> If I have missed something about why this works, please
> add a comment here in v3 to explain it.

Right, it will not work, but it needs a device (lis3lv02dl) that is
not currently support in st_accel_spi.
So I preferred to fix OF capability for currently supported devices
and add missing ones (LIS3LV02DL, LIS331DL and H3LIS331DL)
in a subsequent patch. What do you think? Is it better to squash the
two patches together?

Regards,
Lorenzo

>> +     },
>> +     {
>> +             .compatible = "st,lis3dh-accel",
>> +             .data = LIS3DH_ACCEL_DEV_NAME,
>> +     },
>> +     {
>> +             .compatible = "st,lsm330d-accel",
>> +             .data = LSM330D_ACCEL_DEV_NAME,
>> +     },
>> +     {
>> +             .compatible = "st,lsm330dl-accel",
>> +             .data = LSM330DL_ACCEL_DEV_NAME,
>> +     },
>> +     {
>> +             .compatible = "st,lsm330dlc-accel",
>> +             .data = LSM330DLC_ACCEL_DEV_NAME,
>> +     },
>> +     {
>> +             .compatible = "st,lis331dlh-accel",
>> +             .data = LIS331DLH_ACCEL_DEV_NAME,
>> +     },
>> +     {
>> +             .compatible = "st,lsm330-accel",
>> +             .data = LSM330_ACCEL_DEV_NAME,
>> +     },
>> +     {
>> +             .compatible = "st,lsm303agr-accel",
>> +             .data = LSM303AGR_ACCEL_DEV_NAME,
>> +     },
>> +     {
>> +             .compatible = "st,lis2dh12-accel",
>> +             .data = LIS2DH12_ACCEL_DEV_NAME,
>> +     },
>> +     {
>> +             .compatible = "st,lis3l02dq",
>> +             .data = LIS3L02DQ_ACCEL_DEV_NAME,
>> +     },
>> +     {
>> +             .compatible = "st,lng2dm-accel",
>> +             .data = LNG2DM_ACCEL_DEV_NAME,
>> +     },
>> +     {}
>> +};
>> +MODULE_DEVICE_TABLE(of, st_accel_of_match);
>> +#else
>> +#define st_accel_of_match    NULL
>> +#endif
>> +
>>  static int st_accel_spi_probe(struct spi_device *spi)
>>  {
>>       struct iio_dev *indio_dev;
>> @@ -30,6 +87,8 @@ static int st_accel_spi_probe(struct spi_device *spi)
>>
>>       adata = iio_priv(indio_dev);
>>
>> +     st_sensors_of_name_probe(&spi->dev, st_accel_of_match,
>> +                              spi->modalias, sizeof(spi->modalias));
>>       st_sensors_spi_configure(indio_dev, spi, adata);
>>
>>       err = st_accel_common_probe(indio_dev);
>> @@ -61,14 +120,6 @@ static const struct spi_device_id st_accel_id_table[] = {
>>  };
>>  MODULE_DEVICE_TABLE(spi, st_accel_id_table);
>>
>> -#ifdef CONFIG_OF
>> -static const struct of_device_id st_accel_of_match[] = {
>> -     { .compatible = "st,lis302dl-spi" },
>> -     {}
>> -};
>> -MODULE_DEVICE_TABLE(of, st_accel_of_match);
>> -#endif
>> -
>>  static struct spi_driver st_accel_driver = {
>>       .driver = {
>>               .name = "st-accel-spi",
>



-- 
UNIX is Sexy: who | grep -i blonde | talk; cd ~; wine; talk; touch;
unzip; touch; strip; gasp; finger; gasp; mount; fsck; more; yes; gasp;
umount; make clean; sleep

Re: [PATCH v2 1/4] iio: accel: st_accel_spi: add OF capability to st_accel_spi

[Jonathan Cameron]

On 25 June 2017 18:20:33 CEST, Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> wrote:
>> On Sun, 25 Jun 2017 17:24:10 +0200
>> Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> wrote:
>>
>>> Add device tree support for LIS3DH, LSM330D, LSM330DL, LSM330DLC,
>>> LIS331DLH, LSM330, LSM303AGR, LIS2DH12, LIS3L02DQ, LNG2DM accel
>sensors.
>>>
>>> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
>>> ---
>>>  drivers/iio/accel/st_accel_spi.c | 67
>+++++++++++++++++++++++++++++++++++-----
>>>  1 file changed, 59 insertions(+), 8 deletions(-)
>>>
>>> diff --git a/drivers/iio/accel/st_accel_spi.c
>b/drivers/iio/accel/st_accel_spi.c
>>> index d13742edee0e..a8b61daa83d7 100644
>>> --- a/drivers/iio/accel/st_accel_spi.c
>>> +++ b/drivers/iio/accel/st_accel_spi.c
>>> @@ -18,6 +18,63 @@
>>>  #include <linux/iio/common/st_sensors_spi.h>
>>>  #include "st_accel.h"
>>>
>>> +#ifdef CONFIG_OF
>>> +/*
>>> + * For new single-chip sensors use <device_name> as compatible
>string.
>>> + * For old single-chip devices keep <device_name>-accel to maintain
>>> + * compatibility
>>> + */
>>> +static const struct of_device_id st_accel_of_match[] = {
>>> +     {
>>> +             .compatible = "st,lis302dl-spi"
>> Leaving this without some explanation of why it doesn't have
>> .data set requires a comment at least. It will result
>> in the name never being set - or ending up as
>> the default spi->modalias anyway.. Presumably not what is
>> desired?
>>
>> If I have missed something about why this works, please
>> add a comment here in v3 to explain it.
>
>Right, it will not work, but it needs a device (lis3lv02dl) that is
>not currently support in st_accel_spi.
>So I preferred to fix OF capability for currently supported devices
>and add missing ones (LIS3LV02DL, LIS331DL and H3LIS331DL)
>in a subsequent patch. What do you think? Is it better to squash the
>two patches together?
Up to you, but if separate squash this element for now.
>
>Regards,
>Lorenzo
>
>>> +     },
>>> +     {
>>> +             .compatible = "st,lis3dh-accel",
>>> +             .data = LIS3DH_ACCEL_DEV_NAME,
>>> +     },
>>> +     {
>>> +             .compatible = "st,lsm330d-accel",
>>> +             .data = LSM330D_ACCEL_DEV_NAME,
>>> +     },
>>> +     {
>>> +             .compatible = "st,lsm330dl-accel",
>>> +             .data = LSM330DL_ACCEL_DEV_NAME,
>>> +     },
>>> +     {
>>> +             .compatible = "st,lsm330dlc-accel",
>>> +             .data = LSM330DLC_ACCEL_DEV_NAME,
>>> +     },
>>> +     {
>>> +             .compatible = "st,lis331dlh-accel",
>>> +             .data = LIS331DLH_ACCEL_DEV_NAME,
>>> +     },
>>> +     {
>>> +             .compatible = "st,lsm330-accel",
>>> +             .data = LSM330_ACCEL_DEV_NAME,
>>> +     },
>>> +     {
>>> +             .compatible = "st,lsm303agr-accel",
>>> +             .data = LSM303AGR_ACCEL_DEV_NAME,
>>> +     },
>>> +     {
>>> +             .compatible = "st,lis2dh12-accel",
>>> +             .data = LIS2DH12_ACCEL_DEV_NAME,
>>> +     },
>>> +     {
>>> +             .compatible = "st,lis3l02dq",
>>> +             .data = LIS3L02DQ_ACCEL_DEV_NAME,
>>> +     },
>>> +     {
>>> +             .compatible = "st,lng2dm-accel",
>>> +             .data = LNG2DM_ACCEL_DEV_NAME,
>>> +     },
>>> +     {}
>>> +};
>>> +MODULE_DEVICE_TABLE(of, st_accel_of_match);
>>> +#else
>>> +#define st_accel_of_match    NULL
>>> +#endif
>>> +
>>>  static int st_accel_spi_probe(struct spi_device *spi)
>>>  {
>>>       struct iio_dev *indio_dev;
>>> @@ -30,6 +87,8 @@ static int st_accel_spi_probe(struct spi_device
>*spi)
>>>
>>>       adata = iio_priv(indio_dev);
>>>
>>> +     st_sensors_of_name_probe(&spi->dev, st_accel_of_match,
>>> +                              spi->modalias,
>sizeof(spi->modalias));
>>>       st_sensors_spi_configure(indio_dev, spi, adata);
>>>
>>>       err = st_accel_common_probe(indio_dev);
>>> @@ -61,14 +120,6 @@ static const struct spi_device_id
>st_accel_id_table[] = {
>>>  };
>>>  MODULE_DEVICE_TABLE(spi, st_accel_id_table);
>>>
>>> -#ifdef CONFIG_OF
>>> -static const struct of_device_id st_accel_of_match[] = {
>>> -     { .compatible = "st,lis302dl-spi" },
>>> -     {}
>>> -};
>>> -MODULE_DEVICE_TABLE(of, st_accel_of_match);
>>> -#endif
>>> -
>>>  static struct spi_driver st_accel_driver = {
>>>       .driver = {
>>>               .name = "st-accel-spi",
>>

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.

Re: [PATCH v2 1/4] iio: accel: st_accel_spi: add OF capability to st_accel_spi

[Lorenzo Bianconi]

>
>
> On 25 June 2017 18:20:33 CEST, Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> wrote:
>>> On Sun, 25 Jun 2017 17:24:10 +0200
>>> Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> wrote:
>>>
>>>> Add device tree support for LIS3DH, LSM330D, LSM330DL, LSM330DLC,
>>>> LIS331DLH, LSM330, LSM303AGR, LIS2DH12, LIS3L02DQ, LNG2DM accel
>>sensors.
>>>>
>>>> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
>>>> ---
>>>>  drivers/iio/accel/st_accel_spi.c | 67
>>+++++++++++++++++++++++++++++++++++-----
>>>>  1 file changed, 59 insertions(+), 8 deletions(-)
>>>>
>>>> diff --git a/drivers/iio/accel/st_accel_spi.c
>>b/drivers/iio/accel/st_accel_spi.c
>>>> index d13742edee0e..a8b61daa83d7 100644
>>>> --- a/drivers/iio/accel/st_accel_spi.c
>>>> +++ b/drivers/iio/accel/st_accel_spi.c
>>>> @@ -18,6 +18,63 @@
>>>>  #include <linux/iio/common/st_sensors_spi.h>
>>>>  #include "st_accel.h"
>>>>
>>>> +#ifdef CONFIG_OF
>>>> +/*
>>>> + * For new single-chip sensors use <device_name> as compatible
>>string.
>>>> + * For old single-chip devices keep <device_name>-accel to maintain
>>>> + * compatibility
>>>> + */
>>>> +static const struct of_device_id st_accel_of_match[] = {
>>>> +     {
>>>> +             .compatible = "st,lis302dl-spi"
>>> Leaving this without some explanation of why it doesn't have
>>> .data set requires a comment at least. It will result
>>> in the name never being set - or ending up as
>>> the default spi->modalias anyway.. Presumably not what is
>>> desired?
>>>
>>> If I have missed something about why this works, please
>>> add a comment here in v3 to explain it.
>>
>>Right, it will not work, but it needs a device (lis3lv02dl) that is
>>not currently support in st_accel_spi.
>>So I preferred to fix OF capability for currently supported devices
>>and add missing ones (LIS3LV02DL, LIS331DL and H3LIS331DL)
>>in a subsequent patch. What do you think? Is it better to squash the
>>two patches together?
> Up to you, but if separate squash this element for now.
>>
>>Regards,
>>Lorenzo

Ok, I figured out I can fix support for lis302dl without adding new devices.
I will send a v3 with that fix.
Regards,
Lorenzo

>>
>>>> +     },
>>>> +     {
>>>> +             .compatible = "st,lis3dh-accel",
>>>> +             .data = LIS3DH_ACCEL_DEV_NAME,
>>>> +     },
>>>> +     {
>>>> +             .compatible = "st,lsm330d-accel",
>>>> +             .data = LSM330D_ACCEL_DEV_NAME,
>>>> +     },
>>>> +     {
>>>> +             .compatible = "st,lsm330dl-accel",
>>>> +             .data = LSM330DL_ACCEL_DEV_NAME,
>>>> +     },
>>>> +     {
>>>> +             .compatible = "st,lsm330dlc-accel",
>>>> +             .data = LSM330DLC_ACCEL_DEV_NAME,
>>>> +     },
>>>> +     {
>>>> +             .compatible = "st,lis331dlh-accel",
>>>> +             .data = LIS331DLH_ACCEL_DEV_NAME,
>>>> +     },
>>>> +     {
>>>> +             .compatible = "st,lsm330-accel",
>>>> +             .data = LSM330_ACCEL_DEV_NAME,
>>>> +     },
>>>> +     {
>>>> +             .compatible = "st,lsm303agr-accel",
>>>> +             .data = LSM303AGR_ACCEL_DEV_NAME,
>>>> +     },
>>>> +     {
>>>> +             .compatible = "st,lis2dh12-accel",
>>>> +             .data = LIS2DH12_ACCEL_DEV_NAME,
>>>> +     },
>>>> +     {
>>>> +             .compatible = "st,lis3l02dq",
>>>> +             .data = LIS3L02DQ_ACCEL_DEV_NAME,
>>>> +     },
>>>> +     {
>>>> +             .compatible = "st,lng2dm-accel",
>>>> +             .data = LNG2DM_ACCEL_DEV_NAME,
>>>> +     },
>>>> +     {}
>>>> +};
>>>> +MODULE_DEVICE_TABLE(of, st_accel_of_match);
>>>> +#else
>>>> +#define st_accel_of_match    NULL
>>>> +#endif
>>>> +
>>>>  static int st_accel_spi_probe(struct spi_device *spi)
>>>>  {
>>>>       struct iio_dev *indio_dev;
>>>> @@ -30,6 +87,8 @@ static int st_accel_spi_probe(struct spi_device
>>*spi)
>>>>
>>>>       adata = iio_priv(indio_dev);
>>>>
>>>> +     st_sensors_of_name_probe(&spi->dev, st_accel_of_match,
>>>> +                              spi->modalias,
>>sizeof(spi->modalias));
>>>>       st_sensors_spi_configure(indio_dev, spi, adata);
>>>>
>>>>       err = st_accel_common_probe(indio_dev);
>>>> @@ -61,14 +120,6 @@ static const struct spi_device_id
>>st_accel_id_table[] = {
>>>>  };
>>>>  MODULE_DEVICE_TABLE(spi, st_accel_id_table);
>>>>
>>>> -#ifdef CONFIG_OF
>>>> -static const struct of_device_id st_accel_of_match[] = {
>>>> -     { .compatible = "st,lis302dl-spi" },
>>>> -     {}
>>>> -};
>>>> -MODULE_DEVICE_TABLE(of, st_accel_of_match);
>>>> -#endif
>>>> -
>>>>  static struct spi_driver st_accel_driver = {
>>>>       .driver = {
>>>>               .name = "st-accel-spi",
>>>
>
> --
> Sent from my Android device with K-9 Mail. Please excuse my brevity.



-- 
UNIX is Sexy: who | grep -i blonde | talk; cd ~; wine; talk; touch;
unzip; touch; strip; gasp; finger; gasp; mount; fsck; more; yes; gasp;
umount; make clean; sleep

[PATCH v2 2/4] iio: magnetometer: st_magn_spi: add OF capability to st_magn_spi

[Lorenzo Bianconi]

Add device tree support for LIS3MDL and LSM303AGR magnetometer sensors

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
---
 drivers/iio/magnetometer/st_magn_spi.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/iio/magnetometer/st_magn_spi.c b/drivers/iio/magnetometer/st_magn_spi.c
index f3cb4dc05391..1ea64dd318aa 100644
--- a/drivers/iio/magnetometer/st_magn_spi.c
+++ b/drivers/iio/magnetometer/st_magn_spi.c
@@ -18,6 +18,28 @@
 #include <linux/iio/common/st_sensors_spi.h>
 #include "st_magn.h"
 
+#ifdef CONFIG_OF
+/*
+ * For new single-chip sensors use <device_name> as compatible string.
+ * For old single-chip devices keep <device_name>-magn to maintain
+ * compatibility
+ */
+static const struct of_device_id st_magn_of_match[] = {
+	{
+		.compatible = "st,lis3mdl-magn",
+		.data = LIS3MDL_MAGN_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm303agr-magn",
+		.data = LSM303AGR_MAGN_DEV_NAME,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, st_magn_of_match);
+#else
+#define st_magn_of_match	NULL
+#endif
+
 static int st_magn_spi_probe(struct spi_device *spi)
 {
 	struct iio_dev *indio_dev;
@@ -30,6 +52,8 @@ static int st_magn_spi_probe(struct spi_device *spi)
 
 	mdata = iio_priv(indio_dev);
 
+	st_sensors_of_name_probe(&spi->dev, st_magn_of_match,
+				 spi->modalias, sizeof(spi->modalias));
 	st_sensors_spi_configure(indio_dev, spi, mdata);
 
 	err = st_magn_common_probe(indio_dev);
@@ -57,6 +81,7 @@ MODULE_DEVICE_TABLE(spi, st_magn_id_table);
 static struct spi_driver st_magn_driver = {
 	.driver = {
 		.name = "st-magn-spi",
+		.of_match_table = of_match_ptr(st_magn_of_match),
 	},
 	.probe = st_magn_spi_probe,
 	.remove = st_magn_spi_remove,
-- 
2.13.1

[PATCH v2 3/4] iio: gyro: st_gyro_spi: add OF capability to st_gyro_spi

[Lorenzo Bianconi]

Add device tree support for L3G4200D, LSM330D, LSM330DL, LSM330DLC,
L3GD20, L3GD20H, L3G4IS, LSM330, LSM9DS0 gyroscope sensors

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
---
 drivers/iio/gyro/st_gyro_spi.c | 53 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

diff --git a/drivers/iio/gyro/st_gyro_spi.c b/drivers/iio/gyro/st_gyro_spi.c
index fa14d8f2170d..0b52ed577dc2 100644
--- a/drivers/iio/gyro/st_gyro_spi.c
+++ b/drivers/iio/gyro/st_gyro_spi.c
@@ -18,6 +18,56 @@
 #include <linux/iio/common/st_sensors_spi.h>
 #include "st_gyro.h"
 
+#ifdef CONFIG_OF
+/*
+ * For new single-chip sensors use <device_name> as compatible string.
+ * For old single-chip devices keep <device_name>-gyro to maintain
+ * compatibility
+ */
+static const struct of_device_id st_gyro_of_match[] = {
+	{
+		.compatible = "st,l3g4200d-gyro",
+		.data = L3G4200D_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330d-gyro",
+		.data = LSM330D_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330dl-gyro",
+		.data = LSM330DL_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330dlc-gyro",
+		.data = LSM330DLC_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,l3gd20-gyro",
+		.data = L3GD20_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,l3gd20h-gyro",
+		.data = L3GD20H_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,l3g4is-gyro",
+		.data = L3G4IS_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330-gyro",
+		.data = LSM330_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm9ds0-gyro",
+		.data = LSM9DS0_GYRO_DEV_NAME,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, st_gyro_of_match);
+#else
+#define st_gyro_of_match	NULL
+#endif
+
 static int st_gyro_spi_probe(struct spi_device *spi)
 {
 	struct iio_dev *indio_dev;
@@ -30,6 +80,8 @@ static int st_gyro_spi_probe(struct spi_device *spi)
 
 	gdata = iio_priv(indio_dev);
 
+	st_sensors_of_name_probe(&spi->dev, st_gyro_of_match,
+				 spi->modalias, sizeof(spi->modalias));
 	st_sensors_spi_configure(indio_dev, spi, gdata);
 
 	err = st_gyro_common_probe(indio_dev);
@@ -63,6 +115,7 @@ MODULE_DEVICE_TABLE(spi, st_gyro_id_table);
 static struct spi_driver st_gyro_driver = {
 	.driver = {
 		.name = "st-gyro-spi",
+		.of_match_table = of_match_ptr(st_gyro_of_match),
 	},
 	.probe = st_gyro_spi_probe,
 	.remove = st_gyro_spi_remove,
-- 
2.13.1

[PATCH v2 4/4] iio: pressure: st_pressure_spi: add OF capability to st_pressure_spi

[Lorenzo Bianconi]

Add device tree support for LPS22HB, LPS25H, LPS331AP, LPS001WP
pressure sensors

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
---
 drivers/iio/pressure/st_pressure_spi.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c
index 550508025af1..f5ebd36bb4bf 100644
--- a/drivers/iio/pressure/st_pressure_spi.c
+++ b/drivers/iio/pressure/st_pressure_spi.c
@@ -18,6 +18,36 @@
 #include <linux/iio/common/st_sensors_spi.h>
 #include "st_pressure.h"
 
+#ifdef CONFIG_OF
+/*
+ * For new single-chip sensors use <device_name> as compatible string.
+ * For old single-chip devices keep <device_name>-press to maintain
+ * compatibility
+ */
+static const struct of_device_id st_press_of_match[] = {
+	{
+		.compatible = "st,lps001wp-press",
+		.data = LPS001WP_PRESS_DEV_NAME,
+	},
+	{
+		.compatible = "st,lps25h-press",
+		.data = LPS25H_PRESS_DEV_NAME,
+	},
+	{
+		.compatible = "st,lps331ap-press",
+		.data = LPS331AP_PRESS_DEV_NAME,
+	},
+	{
+		.compatible = "st,lps22hb-press",
+		.data = LPS22HB_PRESS_DEV_NAME,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, st_press_of_match);
+#else
+#define st_press_of_match	NULL
+#endif
+
 static int st_press_spi_probe(struct spi_device *spi)
 {
 	struct iio_dev *indio_dev;
@@ -30,6 +60,8 @@ static int st_press_spi_probe(struct spi_device *spi)
 
 	press_data = iio_priv(indio_dev);
 
+	st_sensors_of_name_probe(&spi->dev, st_press_of_match,
+				 spi->modalias, sizeof(spi->modalias));
 	st_sensors_spi_configure(indio_dev, spi, press_data);
 
 	err = st_press_common_probe(indio_dev);
@@ -58,6 +90,7 @@ MODULE_DEVICE_TABLE(spi, st_press_id_table);
 static struct spi_driver st_press_driver = {
 	.driver = {
 		.name = "st-press-spi",
+		.of_match_table = of_match_ptr(st_press_of_match),
 	},
 	.probe = st_press_spi_probe,
 	.remove = st_press_spi_remove,
-- 
2.13.1

Re: [PATCH v2 0/4] Add OF support to ST sensor framework

[Jonathan Cameron]

On Sun, 25 Jun 2017 17:24:09 +0200
Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> wrote:

> Changes since v1:
> - add missing devices to {accel, magn, gyro, press} of_device_id table
> 
> Lorenzo Bianconi (4):
>   iio: accel: st_accel_spi: add OF capability to st_accel_spi
>   iio: magnetometer: st_magn_spi: add OF capability to st_magn_spi
>   iio: gyro: st_gyro_spi: add OF capability to st_gyro_spi
>   iio: pressure: st_pressure_spi: add OF capability to st_pressure_spi
I am going to let the series as a whole sit a little while to see
if anyone has a better way of dealing with the prefixes we added in the past
that aren't really right for devicetree bindings.

Jonathan
> 
>  drivers/iio/accel/st_accel_spi.c       | 67 ++++++++++++++++++++++++++++++----
>  drivers/iio/gyro/st_gyro_spi.c         | 53 +++++++++++++++++++++++++++
>  drivers/iio/magnetometer/st_magn_spi.c | 25 +++++++++++++
>  drivers/iio/pressure/st_pressure_spi.c | 33 +++++++++++++++++
>  4 files changed, 170 insertions(+), 8 deletions(-)
>