[PULL] First set of IIO fixes for the 5.1 cycle

[PULL] First set of IIO fixes for the 5.1 cycle

[Jonathan Cameron]

The following changes since commit 38e7571c07be01f9f19b355a9306a4e3d5cb0f5b:

  Merge tag 'io_uring-2019-03-06' of git://git.kernel.dk/linux-block (2019-03-08 14:48:40 -0800)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-for-5.1a

for you to fetch changes up to 7f75591fc5a123929a29636834d1bcb8b5c9fee3:

  iio: core: fix a possible circular locking dependency (2019-03-31 11:11:31 +0100)

----------------------------------------------------------------
First set of IIO fixes for the 5.1 cycle.

Mostly the usual mix, but the bme680 SPI fix is much larger than
I would normally like.  It never worked, but conversely we have
code there that would make people expect it to do so.  Chances
of side effects are very low.

* core
  - Fix an uninitialised bitaks that could potentially result in random
    channels being enabled on startup.
* ad7192
  - Fix a wrong channel address for ad7193.
* ade7854
  - Fix a typo that results in returning peak voltage instead of peak current.
* at91
  - Fix a potential hang due to a race on interrupt setting.
* bmg160
  - Fix scale factor of temperature
* bme680
  - Fix scale factor of temperature
  - Fix SPI read interface.  This is a bit of a large patch as it seems
    that it never worked.  It's major for this driver but is unlikely to
    have any negative side effects.
* kxcjk1013
  - restore sensor range setting after resume.
* mcp4725
  - make sure to store powerdown bits when storing to the eeprom.
* mpu3050
  - Mask the chip ID correctly as we have chips that set the bother bits of
    this register.
* sgp30
  - Fix a missing Kconfig block that means the driver doesn't actually ever
    get built.

----------------------------------------------------------------
Arnd Bergmann (1):
      iio: pms7003: select IIO_TRIGGERED_BUFFER

Dragos Bogdan (1):
      iio: ad_sigma_delta: select channel when reading register

Fabrice Gasnier (1):
      iio: core: fix a possible circular locking dependency

Georg Ottinger (1):
      iio: adc: at91: disable adc channel interrupt in timeout case

Gwendal Grignou (1):
      iio: cros_ec: Fix the maths for gyro scale calculation

Jean-Francois Dagenais (1):
      iio: dac: mcp4725: add missing powerdown bits in store eeprom

Jonathan Cameron (1):
      iio: chemical: fix missing Kconfig block for sgp30

Lars-Peter Clausen (1):
      iio: Fix scan mask selection

Leonard Pollak (1):
      Staging: iio: meter: fixed typo

Mike Looijmans (3):
      iio/gyro/bmg160: Use millidegrees for temperature scale
      iio:chemical:bme680: Fix, report temperature in millidegrees
      iio:chemical:bme680: Fix SPI read interface

Mircea Caprioru (1):
      staging: iio: ad7192: Fix ad7193 channel address

Sergey Larin (1):
      iio: gyro: mpu3050: fix chip ID reading

Sven Van Asbroeck (3):
      iio: adc: xilinx: fix potential use-after-free on remove
      iio: adc: xilinx: fix potential use-after-free on probe
      iio: adc: xilinx: prevent touching unclocked h/w on remove

he, bo (1):
      io: accel: kxcjk1013: restore the range after resume.

 drivers/iio/accel/kxcjk-1013.c                     |   2 +
 drivers/iio/adc/ad_sigma_delta.c                   |   1 +
 drivers/iio/adc/at91_adc.c                         |  28 +++--
 drivers/iio/adc/xilinx-xadc-core.c                 |   3 +-
 drivers/iio/chemical/Kconfig                       |  14 +++
 drivers/iio/chemical/bme680.h                      |   6 +-
 drivers/iio/chemical/bme680_core.c                 |  54 ++++++++--
 drivers/iio/chemical/bme680_i2c.c                  |  21 ----
 drivers/iio/chemical/bme680_spi.c                  | 115 ++++++++++++++-------
 .../iio/common/cros_ec_sensors/cros_ec_sensors.c   |   7 +-
 drivers/iio/dac/mcp4725.c                          |   1 +
 drivers/iio/gyro/bmg160_core.c                     |   6 +-
 drivers/iio/gyro/mpu3050-core.c                    |   8 +-
 drivers/iio/industrialio-buffer.c                  |   5 +-
 drivers/iio/industrialio-core.c                    |   4 +-
 drivers/staging/iio/adc/ad7192.c                   |   8 +-
 drivers/staging/iio/meter/ade7854.c                |   2 +-
 17 files changed, 183 insertions(+), 102 deletions(-)

Re: [PULL] First set of IIO fixes for the 5.1 cycle

[Greg KH]

On Mon, Apr 01, 2019 at 08:28:47PM +0100, Jonathan Cameron wrote:
> The following changes since commit 38e7571c07be01f9f19b355a9306a4e3d5cb0f5b:
> 
>   Merge tag 'io_uring-2019-03-06' of git://git.kernel.dk/linux-block (2019-03-08 14:48:40 -0800)
> 
> are available in the Git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-for-5.1a
> 
> for you to fetch changes up to 7f75591fc5a123929a29636834d1bcb8b5c9fee3:
> 
>   iio: core: fix a possible circular locking dependency (2019-03-31 11:11:31 +0100)

Pulled and pushed out, thanks.

greg k-h