From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Alexandru Ardelean <alexandru.ardelean@analog.com>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>,
Sasha Levin <sashal@kernel.org>,
linux-iio@vger.kernel.org
Subject: [PATCH AUTOSEL 5.4 117/350] iio: dac: ad7303: replace mlock with own lock
Date: Tue, 10 Dec 2019 16:03:42 -0500 [thread overview]
Message-ID: <20191210210735.9077-78-sashal@kernel.org> (raw)
In-Reply-To: <20191210210735.9077-1-sashal@kernel.org>
From: Alexandru Ardelean <alexandru.ardelean@analog.com>
[ Upstream commit c991bf9b650f39481cf3c1137092d4754a2c75de ]
This change replaces indio_dev's mlock with the driver's own lock. The lock
is mostly needed to protect state when changing the `dac_cache` info.
The lock has been extended to `ad7303_read_raw()`, to make sure that the
cache is updated if an SPI-write is already in progress.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iio/dac/ad7303.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/iio/dac/ad7303.c b/drivers/iio/dac/ad7303.c
index 8de9f40226e62..14bbac6bee982 100644
--- a/drivers/iio/dac/ad7303.c
+++ b/drivers/iio/dac/ad7303.c
@@ -41,6 +41,7 @@ struct ad7303_state {
struct regulator *vdd_reg;
struct regulator *vref_reg;
+ struct mutex lock;
/*
* DMA (thus cache coherency maintenance) requires the
* transfer buffers to live in their own cache lines.
@@ -79,7 +80,7 @@ static ssize_t ad7303_write_dac_powerdown(struct iio_dev *indio_dev,
if (ret)
return ret;
- mutex_lock(&indio_dev->mlock);
+ mutex_lock(&st->lock);
if (pwr_down)
st->config |= AD7303_CFG_POWER_DOWN(chan->channel);
@@ -90,7 +91,7 @@ static ssize_t ad7303_write_dac_powerdown(struct iio_dev *indio_dev,
* mode, so just write one of the DAC channels again */
ad7303_write(st, chan->channel, st->dac_cache[chan->channel]);
- mutex_unlock(&indio_dev->mlock);
+ mutex_unlock(&st->lock);
return len;
}
@@ -116,7 +117,9 @@ static int ad7303_read_raw(struct iio_dev *indio_dev,
switch (info) {
case IIO_CHAN_INFO_RAW:
+ mutex_lock(&st->lock);
*val = st->dac_cache[chan->channel];
+ mutex_unlock(&st->lock);
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
vref_uv = ad7303_get_vref(st, chan);
@@ -144,11 +147,11 @@ static int ad7303_write_raw(struct iio_dev *indio_dev,
if (val >= (1 << chan->scan_type.realbits) || val < 0)
return -EINVAL;
- mutex_lock(&indio_dev->mlock);
+ mutex_lock(&st->lock);
ret = ad7303_write(st, chan->address, val);
if (ret == 0)
st->dac_cache[chan->channel] = val;
- mutex_unlock(&indio_dev->mlock);
+ mutex_unlock(&st->lock);
break;
default:
ret = -EINVAL;
@@ -211,6 +214,8 @@ static int ad7303_probe(struct spi_device *spi)
st->spi = spi;
+ mutex_init(&st->lock);
+
st->vdd_reg = devm_regulator_get(&spi->dev, "Vdd");
if (IS_ERR(st->vdd_reg))
return PTR_ERR(st->vdd_reg);
--
2.20.1
next prev parent reply other threads:[~2019-12-10 21:47 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20191210210735.9077-1-sashal@kernel.org>
2019-12-10 21:02 ` [PATCH AUTOSEL 5.4 074/350] iio: proximity: sx9500: fix iio_triggered_buffer_{predisable,postenable} positions Sasha Levin
2019-12-15 15:52 ` Jonathan Cameron
2019-12-10 21:03 ` [PATCH AUTOSEL 5.4 105/350] iio: chemical: atlas-ph-sensor: fix iio_triggered_buffer_predisable() position Sasha Levin
2019-12-15 15:53 ` Jonathan Cameron
2019-12-15 23:25 ` Matt Ranostay
2019-12-19 17:34 ` Sasha Levin
2019-12-10 21:03 ` [PATCH AUTOSEL 5.4 116/350] iio: adc: max1027: Reset the device at probe time Sasha Levin
2019-12-10 21:03 ` Sasha Levin [this message]
2019-12-15 15:55 ` [PATCH AUTOSEL 5.4 117/350] iio: dac: ad7303: replace mlock with own lock Jonathan Cameron
2019-12-10 21:03 ` [PATCH AUTOSEL 5.4 129/350] staging: iio: ad9834: add a check for devm_clk_get Sasha Levin
2019-12-10 21:04 ` [PATCH AUTOSEL 5.4 137/350] iio: pressure: zpa2326: fix iio_triggered_buffer_postenable position Sasha Levin
2019-12-15 15:57 ` Jonathan Cameron
2019-12-16 7:50 ` Ardelean, Alexandru
2019-12-10 21:04 ` [PATCH AUTOSEL 5.4 192/350] iio: dln2-adc: fix iio_triggered_buffer_postenable() position Sasha Levin
2019-12-15 15:58 ` Jonathan Cameron
2019-12-10 21:06 ` [PATCH AUTOSEL 5.4 256/350] iio: imu: st_lsm6dsx: fix ODR check in st_lsm6dsx_write_raw Sasha Levin
2019-12-10 21:06 ` [PATCH AUTOSEL 5.4 260/350] iio: cros_ec_baro: set info_mask_shared_by_all_available field Sasha Levin
2019-12-10 21:06 ` [PATCH AUTOSEL 5.4 266/350] iio: dac: ad5446: Add support for new AD5600 DAC Sasha Levin
2019-12-10 21:06 ` [PATCH AUTOSEL 5.4 268/350] iio: adis16480: Fix scales factors Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191210210735.9077-78-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=alexandru.ardelean@analog.com \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox