From: Jonathan Cameron <jic23@kernel.org>
To: Sasha Levin <sashal@kernel.org>
Cc: linux-kernel@vger.kernel.org, stable@vger.kernel.org,
Alexandru Ardelean <alexandru.ardelean@analog.com>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>,
linux-iio@vger.kernel.org
Subject: Re: [PATCH AUTOSEL 5.4 192/350] iio: dln2-adc: fix iio_triggered_buffer_postenable() position
Date: Sun, 15 Dec 2019 15:58:46 +0000 [thread overview]
Message-ID: <20191215155846.37c85c2e@archlinux> (raw)
In-Reply-To: <20191210210735.9077-153-sashal@kernel.org>
On Tue, 10 Dec 2019 16:04:57 -0500
Sasha Levin <sashal@kernel.org> wrote:
> From: Alexandru Ardelean <alexandru.ardelean@analog.com>
>
> [ Upstream commit a7bddfe2dfce1d8859422124abe1964e0ecd386e ]
>
> The iio_triggered_buffer_postenable() hook should be called first to
> attach the poll function. The iio_triggered_buffer_predisable() hook is
> called last (as is it should).
>
> This change moves iio_triggered_buffer_postenable() to be called first. It
> adds iio_triggered_buffer_predisable() on the error paths of the postenable
> hook.
> For the predisable hook, some code-paths have been changed to make sure
> that the iio_triggered_buffer_predisable() hook gets called in case there
> is an error before it.
Again, fixing logic to allow a more generic rework rather than actual bug.
I didn't do a very good job of adding notes to all of these to indicate
they weren't stable material. Sorry about that.
Note I am fairly careful about tagging fixes that should go to stable...
Jonathan
>
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
> drivers/iio/adc/dln2-adc.c | 20 ++++++++++++++------
> 1 file changed, 14 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/iio/adc/dln2-adc.c b/drivers/iio/adc/dln2-adc.c
> index 5fa78c273a258..65c7c9329b1c3 100644
> --- a/drivers/iio/adc/dln2-adc.c
> +++ b/drivers/iio/adc/dln2-adc.c
> @@ -524,6 +524,10 @@ static int dln2_adc_triggered_buffer_postenable(struct iio_dev *indio_dev)
> u16 conflict;
> unsigned int trigger_chan;
>
> + ret = iio_triggered_buffer_postenable(indio_dev);
> + if (ret)
> + return ret;
> +
> mutex_lock(&dln2->mutex);
>
> /* Enable ADC */
> @@ -537,6 +541,7 @@ static int dln2_adc_triggered_buffer_postenable(struct iio_dev *indio_dev)
> (int)conflict);
> ret = -EBUSY;
> }
> + iio_triggered_buffer_predisable(indio_dev);
> return ret;
> }
>
> @@ -550,6 +555,7 @@ static int dln2_adc_triggered_buffer_postenable(struct iio_dev *indio_dev)
> mutex_unlock(&dln2->mutex);
> if (ret < 0) {
> dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__);
> + iio_triggered_buffer_predisable(indio_dev);
> return ret;
> }
> } else {
> @@ -557,12 +563,12 @@ static int dln2_adc_triggered_buffer_postenable(struct iio_dev *indio_dev)
> mutex_unlock(&dln2->mutex);
> }
>
> - return iio_triggered_buffer_postenable(indio_dev);
> + return 0;
> }
>
> static int dln2_adc_triggered_buffer_predisable(struct iio_dev *indio_dev)
> {
> - int ret;
> + int ret, ret2;
> struct dln2_adc *dln2 = iio_priv(indio_dev);
>
> mutex_lock(&dln2->mutex);
> @@ -577,12 +583,14 @@ static int dln2_adc_triggered_buffer_predisable(struct iio_dev *indio_dev)
> ret = dln2_adc_set_port_enabled(dln2, false, NULL);
>
> mutex_unlock(&dln2->mutex);
> - if (ret < 0) {
> + if (ret < 0)
> dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__);
> - return ret;
> - }
>
> - return iio_triggered_buffer_predisable(indio_dev);
> + ret2 = iio_triggered_buffer_predisable(indio_dev);
> + if (ret == 0)
> + ret = ret2;
> +
> + return ret;
> }
>
> static const struct iio_buffer_setup_ops dln2_adc_buffer_setup_ops = {
next prev parent reply other threads:[~2019-12-15 15:58 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20191210210735.9077-1-sashal@kernel.org>
2019-12-10 21:02 ` [PATCH AUTOSEL 5.4 074/350] iio: proximity: sx9500: fix iio_triggered_buffer_{predisable,postenable} positions Sasha Levin
2019-12-15 15:52 ` Jonathan Cameron
2019-12-10 21:03 ` [PATCH AUTOSEL 5.4 105/350] iio: chemical: atlas-ph-sensor: fix iio_triggered_buffer_predisable() position Sasha Levin
2019-12-15 15:53 ` Jonathan Cameron
2019-12-15 23:25 ` Matt Ranostay
2019-12-19 17:34 ` Sasha Levin
2019-12-10 21:03 ` [PATCH AUTOSEL 5.4 116/350] iio: adc: max1027: Reset the device at probe time Sasha Levin
2019-12-10 21:03 ` [PATCH AUTOSEL 5.4 117/350] iio: dac: ad7303: replace mlock with own lock Sasha Levin
2019-12-15 15:55 ` Jonathan Cameron
2019-12-10 21:03 ` [PATCH AUTOSEL 5.4 129/350] staging: iio: ad9834: add a check for devm_clk_get Sasha Levin
2019-12-10 21:04 ` [PATCH AUTOSEL 5.4 137/350] iio: pressure: zpa2326: fix iio_triggered_buffer_postenable position Sasha Levin
2019-12-15 15:57 ` Jonathan Cameron
2019-12-16 7:50 ` Ardelean, Alexandru
2019-12-10 21:04 ` [PATCH AUTOSEL 5.4 192/350] iio: dln2-adc: fix iio_triggered_buffer_postenable() position Sasha Levin
2019-12-15 15:58 ` Jonathan Cameron [this message]
2019-12-10 21:06 ` [PATCH AUTOSEL 5.4 256/350] iio: imu: st_lsm6dsx: fix ODR check in st_lsm6dsx_write_raw Sasha Levin
2019-12-10 21:06 ` [PATCH AUTOSEL 5.4 260/350] iio: cros_ec_baro: set info_mask_shared_by_all_available field Sasha Levin
2019-12-10 21:06 ` [PATCH AUTOSEL 5.4 266/350] iio: dac: ad5446: Add support for new AD5600 DAC Sasha Levin
2019-12-10 21:06 ` [PATCH AUTOSEL 5.4 268/350] iio: adis16480: Fix scales factors Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191215155846.37c85c2e@archlinux \
--to=jic23@kernel.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=alexandru.ardelean@analog.com \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sashal@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox