public inbox for linux-iio@vger.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: linux-iio@vger.kernel.org, lorenzo.bianconi@redhat.com
Subject: Re: [PATCH 2/6] iio: imu: st_lsm6dsx: check if master_enable is located in primary page
Date: Mon, 23 Dec 2019 16:51:40 +0000	[thread overview]
Message-ID: <20191223165140.1da5632c@archlinux> (raw)
In-Reply-To: <9301949c51a78df2c818619c3be634274f13a790.1576341963.git.lorenzo@kernel.org>

On Sat, 14 Dec 2019 17:52:55 +0100
Lorenzo Bianconi <lorenzo@kernel.org> wrote:

> Check if the master enable register is located in the primary or in the
> secondary memory page. This is a preliminary patch to support i2c master
> controller on lsm6dsm devices
> 
> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Applied.

Thanks,

Jonathan

> ---
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h      |  6 +++++-
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c |  2 ++
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 11 +++++++----
>  3 files changed, 14 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> index fb76e0d6770d..0f8f3fbde67a 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> @@ -184,7 +184,11 @@ struct st_lsm6dsx_hw_ts_settings {
>   */
>  struct st_lsm6dsx_shub_settings {
>  	struct st_lsm6dsx_reg page_mux;
> -	struct st_lsm6dsx_reg master_en;
> +	struct {
> +		bool sec_page;
> +		u8 addr;
> +		u8 mask;
> +	} master_en;
>  	struct st_lsm6dsx_reg pullup_en;
>  	struct st_lsm6dsx_reg aux_sens;
>  	struct st_lsm6dsx_reg wr_once;
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> index bf995b58c333..fe1aaaf68a9b 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> @@ -867,6 +867,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
>  				.mask = BIT(6),
>  			},
>  			.master_en = {
> +				.sec_page = true,
>  				.addr = 0x14,
>  				.mask = BIT(2),
>  			},
> @@ -1242,6 +1243,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
>  				.mask = BIT(6),
>  			},
>  			.master_en = {
> +				.sec_page = true,
>  				.addr = 0x14,
>  				.mask = BIT(2),
>  			},
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
> index 5684e663d0aa..767482e61a1e 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
> @@ -185,15 +185,18 @@ static int st_lsm6dsx_shub_master_enable(struct st_lsm6dsx_sensor *sensor,
>  	mutex_lock(&hw->page_lock);
>  
>  	hub_settings = &hw->settings->shub_settings;
> -	err = st_lsm6dsx_set_page(hw, true);
> -	if (err < 0)
> -		goto out;
> +	if (hub_settings->master_en.sec_page) {
> +		err = st_lsm6dsx_set_page(hw, true);
> +		if (err < 0)
> +			goto out;
> +	}
>  
>  	data = ST_LSM6DSX_SHIFT_VAL(enable, hub_settings->master_en.mask);
>  	err = regmap_update_bits(hw->regmap, hub_settings->master_en.addr,
>  				 hub_settings->master_en.mask, data);
>  
> -	st_lsm6dsx_set_page(hw, false);
> +	if (hub_settings->master_en.sec_page)
> +		st_lsm6dsx_set_page(hw, false);
>  out:
>  	mutex_unlock(&hw->page_lock);
>  


  reply	other threads:[~2019-12-23 17:01 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-14 16:52 [PATCH 0/6] introduce i2c master controller support for LSM6DSM Lorenzo Bianconi
2019-12-14 16:52 ` [PATCH 1/6] iio: imu: st_lsm6dsx: export max num of slave devices in st_lsm6dsx_shub_settings Lorenzo Bianconi
2019-12-23 16:50   ` Jonathan Cameron
2019-12-14 16:52 ` [PATCH 2/6] iio: imu: st_lsm6dsx: check if master_enable is located in primary page Lorenzo Bianconi
2019-12-23 16:51   ` Jonathan Cameron [this message]
2019-12-14 16:52 ` [PATCH 3/6] iio: imu: st_lsm6dsx: check if pull_up " Lorenzo Bianconi
2019-12-23 16:51   ` Jonathan Cameron
2019-12-23 16:59   ` Jonathan Cameron
2019-12-14 16:52 ` [PATCH 4/6] iio: imu: st_lsm6dsx: check if shub_output reg " Lorenzo Bianconi
2019-12-23 17:00   ` Jonathan Cameron
2019-12-14 16:52 ` [PATCH 5/6] iio: imu: st_lsm6dsx: rename st_lsm6dsx_shub_read_reg in st_lsm6dsx_shub_read_output Lorenzo Bianconi
2019-12-23 17:01   ` Jonathan Cameron
2019-12-14 16:52 ` [PATCH 6/6] iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm Lorenzo Bianconi
2019-12-23 16:49   ` Jonathan Cameron
2019-12-23 17:25     ` Lorenzo Bianconi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191223165140.1da5632c@archlinux \
    --to=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=lorenzo.bianconi@redhat.com \
    --cc=lorenzo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox