Re: [PATCH 5/6] iio: imu: st_lsm6dsx: rename st_lsm6dsx_shub_read_reg in st_lsm6dsx_shub_read_output

[Jonathan Cameron <jic23@kernel.org>]

On Sat, 14 Dec 2019 17:52:58 +0100
Lorenzo Bianconi <lorenzo@kernel.org> wrote:

> Rename st_lsm6dsx_shub_read_reg routine in st_lsm6dsx_shub_read_output
> since it is used to read from sensorhub channel0 output register
> 
> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Applied.

Thanks,

Jonathan

> ---
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 11 ++++++-----
>  1 file changed, 6 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
> index ccc59682cb66..dc739dfb36f2 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
> @@ -101,13 +101,13 @@ static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw)
>  }
>  
>  /**
> - * st_lsm6dsx_shub_read_reg - read i2c controller register
> + * st_lsm6dsx_shub_read_output - read i2c controller register
>   *
>   * Read st_lsm6dsx i2c controller register
>   */
>  static int
> -st_lsm6dsx_shub_read_reg(struct st_lsm6dsx_hw *hw, u8 *data,
> -			 int len)
> +st_lsm6dsx_shub_read_output(struct st_lsm6dsx_hw *hw, u8 *data,
> +			    int len)
>  {
>  	const struct st_lsm6dsx_shub_settings *hub_settings;
>  	int err;
> @@ -243,7 +243,8 @@ st_lsm6dsx_shub_read(struct st_lsm6dsx_sensor *sensor, u8 addr,
>  
>  	st_lsm6dsx_shub_wait_complete(hw);
>  
> -	err = st_lsm6dsx_shub_read_reg(hw, data, len & ST_LS6DSX_READ_OP_MASK);
> +	err = st_lsm6dsx_shub_read_output(hw, data,
> +					  len & ST_LS6DSX_READ_OP_MASK);
>  
>  	st_lsm6dsx_shub_master_enable(sensor, false);
>  
> @@ -725,7 +726,7 @@ st_lsm6dsx_shub_check_wai(struct st_lsm6dsx_hw *hw, u8 *i2c_addr,
>  
>  		st_lsm6dsx_shub_wait_complete(hw);
>  
> -		err = st_lsm6dsx_shub_read_reg(hw, &data, sizeof(data));
> +		err = st_lsm6dsx_shub_read_output(hw, &data, sizeof(data));
>  
>  		st_lsm6dsx_shub_master_enable(sensor, false);
>