[PATCH 2/2] dt-bindings: iio: adc: Add MAX1241 device tree bindings in documentation

[Alexandru Lazar <alazar@startmail.com>]

Add device-tree bindings documentation for the MAX1241 device driver.

Signed-off-by: Alexandru Lazar <alazar@startmail.com>
---
 .../bindings/iio/adc/maxim,max1241.yaml       | 62 +++++++++++++++++++
 1 file changed, 62 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml

diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
new file mode 100644
index 000000000000..28c73ed795aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright 2020 Ioan-Alexandru Lazar
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max1241.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX1241 12-bit, single-channel analog to digital converter
+
+maintainers:
+  - Ioan-Alexandru Lazar <alazar@startmail.com>
+
+description: |
+  Bindings for the max1241 12-bit, single-channel ADC device. This
+  driver supports voltage reading and can optionally be configured for
+  power-down mode operation. The datasheet can be found at:
+    https://datasheets.maximintegrated.com/en/ds/MAX1240-MAX1241.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max1241
+
+  reg:
+    description: SPI chip select number for this device
+    maxItems: 1
+
+  vref-supply:
+    description:
+      Device tree identifier of the regulator that provides the external
+      reference voltage.
+    maxItems: 1
+
+  shdn-gpios:
+    description:
+      GPIO spec for the GPIO pin connected to the ADC's /SHDN pin. If
+      specified, the /SHDN pin will be asserted between conversions,
+      thus enabling power-down mode.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+        adc@0 {
+            compatible = "maxim,max1241";
+            reg = <0>;
+            vref-supply = <&vdd_3v3_reg>;
+            spi-max-frequency = <1000000>;
+            shdn-gpios = <&gpio 26 1>;
+        };
+    };
+
+
-- 
2.25.1