From: Jonathan Cameron <jic23@kernel.org>
To: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Cc: Lorenzo Bianconi <lorenzo@kernel.org>,
"linux-iio@vger.kernel.org" <linux-iio@vger.kernel.org>,
"mario.tesi@st.com" <mario.tesi@st.com>,
Vitor Soares <Vitor.Soares@synopsys.com>
Subject: Re: [PATCH] iio: imu: st_lsm6dsx: flush hw FIFO before resetting the device
Date: Sun, 5 Apr 2020 10:26:23 +0100 [thread overview]
Message-ID: <20200405102623.4a850ca7@archlinux> (raw)
In-Reply-To: <CAJ0CqmWaUp+H9GiEedjZ+Wc+=Bj=Adv60LeKqPrCmH2vD4sM9w@mail.gmail.com>
On Sat, 4 Apr 2020 19:09:18 +0200
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> wrote:
> >
> > On Sat, 4 Apr 2020 18:29:25 +0200
> > Lorenzo Bianconi <lorenzo.bianconi@redhat.com> wrote:
> >
> > > >
> > > > Hi Lorenzo,
> > > >
> > > > From: Lorenzo Bianconi <lorenzo@kernel.org>
> > > > Date: Fri, Mar 13, 2020 at 18:06:00
> > > >
> > > > > flush hw FIFO before device reset in order to avoid possible races
> > > > > on interrupt line 1. If the first interrupt line is asserted during
> > > > > hw reset the device will work in I3C-only mode (if it is supported)
> > > > >
> > >
> > > Hi Jonathan,
> > >
> > > any news about this patch? Maybe I am wrong but I am not able to find
> > > it in your tree.
> > > Thanks in advance.
> >
> > I'm running a bit behind on catching up with fixes after it became obvious
> > they wouldn't make the merge window.
> >
> > Applied to the fixes-togreg branch of iio.git and marked for stable.
> >
>
> ack, thx...sorry for all the noise around it.
No problem - it reminded me to actually do something about this and other
patches in the same position ;)
Jonathan
>
> Regards,
> Lorenzo
>
> > >
> > > Regards,
> > > Lorenzo
> > >
> > >
> > > > > Fixes: 801a6e0af0c6 ("iio: imu: st_lsm6dsx: add support to LSM6DSO")
> > > > > Fixes: 43901008fde0 ("iio: imu: st_lsm6dsx: add support to LSM6DSR")
> > > > > Reported-by: Mario Tesi <mario.tesi@st.com>
> > > > > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> > > > > ---
> > > > > This is a new version of: "iio: imu: st_lsm6dsx: disable I3C support during
> > > > > device reset"
> > > > > https://urldefense.proofpoint.com/v2/url?u=https-3A__patchwork.kernel.org_patch_11425389_&d=DwIDAg&c=DPL6_X_6JkXFx7AXWqB0tg&r=qVuU64u9x77Y0Kd0PhDK_lpxFgg6PK9PateHwjb_DY0&m=d7oUzE4fWeY3JqYqqd-uW_v1SJkij_sOpXRvpm3-Thg&s=BEgROrIZoG9oGrwQEENFz0DP88VioXUhpeZP2Y168XI&e=
> > > > > ---
> > > > > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 24 +++++++++++++++++++-
> > > > > 1 file changed, 23 insertions(+), 1 deletion(-)
> > > > >
> > > > > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > > > > index 84d219ae6aee..4426524b59f2 100644
> > > > > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > > > > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > > > > @@ -2036,11 +2036,21 @@ static int st_lsm6dsx_init_hw_timer(struct st_lsm6dsx_hw *hw)
> > > > > return 0;
> > > > > }
> > > > >
> > > > > -static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
> > > > > +static int st_lsm6dsx_reset_device(struct st_lsm6dsx_hw *hw)
> > > > > {
> > > > > const struct st_lsm6dsx_reg *reg;
> > > > > int err;
> > > > >
> > > > > + /*
> > > > > + * flush hw FIFO before device reset in order to avoid
> > > > > + * possible races on interrupt line 1. If the first interrupt
> > > > > + * line is asserted during hw reset the device will work in
> > > > > + * I3C-only mode (if it is supported)
> > > > > + */
> > > > > + err = st_lsm6dsx_flush_fifo(hw);
> > > > > + if (err < 0 && err != -ENOTSUPP)
> > > > > + return err;
> > > > > +
> > > > > /* device sw reset */
> > > > > reg = &hw->settings->reset;
> > > > > err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
> > > > > @@ -2059,6 +2069,18 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
> > > > >
> > > > > msleep(50);
> > > > >
> > > > > + return 0;
> > > > > +}
> > > > > +
> > > > > +static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
> > > > > +{
> > > > > + const struct st_lsm6dsx_reg *reg;
> > > > > + int err;
> > > > > +
> > > > > + err = st_lsm6dsx_reset_device(hw);
> > > > > + if (err < 0)
> > > > > + return err;
> > > > > +
> > > > > /* enable Block Data Update */
> > > > > reg = &hw->settings->bdu;
> > > > > err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
> > > > > --
> > > > > 2.24.1
> > > >
> > > > I tested the patch and the I3C interface is working fine in this version.
> > > >
> > > > Reviewed-by: Vitor Soares <vitor.soares@synopsys.com>
> > > > Tested-by: Vitor Soares <vitor.soares@synopsys.com>
> > > >
> >
> > > > Best regards,
> > > > Vitor
> > > > Soares
> > > >
> > > >
> > >
> >
>
prev parent reply other threads:[~2020-04-05 9:26 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-13 18:06 [PATCH] iio: imu: st_lsm6dsx: flush hw FIFO before resetting the device Lorenzo Bianconi
2020-03-17 13:08 ` Vitor Soares
2020-04-04 16:29 ` Lorenzo Bianconi
2020-04-04 17:06 ` Jonathan Cameron
2020-04-04 17:09 ` Lorenzo Bianconi
2020-04-05 9:26 ` Jonathan Cameron [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200405102623.4a850ca7@archlinux \
--to=jic23@kernel.org \
--cc=Vitor.Soares@synopsys.com \
--cc=linux-iio@vger.kernel.org \
--cc=lorenzo.bianconi@redhat.com \
--cc=lorenzo@kernel.org \
--cc=mario.tesi@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox