Re: [PATCH v3] iio: humidity: hdc100x: Add margin to the conversion time

[Jonathan Cameron <jic23@kernel.org>]

On Wed, 16 Jun 2021 13:43:35 +0100
Jonathan Cameron <jic23@kernel.org> wrote:

> On Mon, 14 Jun 2021 09:18:20 -0500
> Chris Lesiak <chris.lesiak@licor.com> wrote:
> 
> > The datasheets have the following note for the conversion time
> > specification: "This parameter is specified by design and/or
> > characterization and it is not tested in production."
> > 
> > Parts have been seen that require more time to do 14-bit conversions for
> > the relative humidity channel.  The result is ENXIO due to the address
> > phase of a transfer not getting an ACK.
> > 
> > Delay an additional 1 ms per conversion to allow for additional margin.
> > 
> > Fixes: 4839367d99e3 ("iio: humidity: add HDC100x support")
> > Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>  
> 
> +CC Matt as this is one of his drivers.

@Matt. Ping.

> 
> Looks good to me.
> 
> > ---
> >  drivers/iio/humidity/hdc100x.c | 6 ++++--
> >  1 file changed, 4 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/iio/humidity/hdc100x.c b/drivers/iio/humidity/hdc100x.c
> > index 2a957f19048e..9e0fce917ce4 100644
> > --- a/drivers/iio/humidity/hdc100x.c
> > +++ b/drivers/iio/humidity/hdc100x.c
> > @@ -25,6 +25,8 @@
> >  #include <linux/iio/trigger_consumer.h>
> >  #include <linux/iio/triggered_buffer.h>
> >  
> > +#include <linux/time.h>
> > +
> >  #define HDC100X_REG_TEMP			0x00
> >  #define HDC100X_REG_HUMIDITY			0x01
> >  
> > @@ -166,7 +168,7 @@ static int hdc100x_get_measurement(struct hdc100x_data *data,
> >  				   struct iio_chan_spec const *chan)
> >  {
> >  	struct i2c_client *client = data->client;
> > -	int delay = data->adc_int_us[chan->address];
> > +	int delay = data->adc_int_us[chan->address] + 1*USEC_PER_MSEC;
> >  	int ret;
> >  	__be16 val;
> >  
> > @@ -316,7 +318,7 @@ static irqreturn_t hdc100x_trigger_handler(int irq, void *p)
> >  	struct iio_dev *indio_dev = pf->indio_dev;
> >  	struct hdc100x_data *data = iio_priv(indio_dev);
> >  	struct i2c_client *client = data->client;
> > -	int delay = data->adc_int_us[0] + data->adc_int_us[1];
> > +	int delay = data->adc_int_us[0] + data->adc_int_us[1] + 2*USEC_PER_MSEC;
> >  	int ret;
> >  
> >  	/* dual read starts at temp register */  
>