From: Jacopo Mondi <jacopo@jmondi.org>
To: Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Matt Ranostay <matt.ranostay@konsulko.com>,
Magnus Damm <magnus.damm@gmail.com>
Cc: Jacopo Mondi <jacopo@jmondi.org>,
linux-iio@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, Rob Herring <robh@kernel.org>
Subject: [PATCH v5 1/4] dt-bindings: iio: chemical: Document senseair,sunrise CO2 sensor
Date: Thu, 9 Sep 2021 11:45:34 +0200 [thread overview]
Message-ID: <20210909094537.218064-2-jacopo@jmondi.org> (raw)
In-Reply-To: <20210909094537.218064-1-jacopo@jmondi.org>
Add documentation for the Senseair Sunrise 006-0-0007 CO2 NDIR sensor.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../iio/chemical/senseair,sunrise.yaml | 55 +++++++++++++++++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
2 files changed, 57 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/chemical/senseair,sunrise.yaml
diff --git a/Documentation/devicetree/bindings/iio/chemical/senseair,sunrise.yaml b/Documentation/devicetree/bindings/iio/chemical/senseair,sunrise.yaml
new file mode 100644
index 000000000000..337fe09e4bb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/senseair,sunrise.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/senseair,sunrise.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Senseair Sunrise 006-0-0007 CO2 Sensor
+
+maintainers:
+ - Jacopo Mondi <jacopo@jmondi.org>
+
+description: |
+ Senseair Sunrise 006-0-0007 is a NDIR CO2 sensor. It supports I2C or UART buses
+ for communications and control.
+
+ Datasheets:
+ https://rmtplusstoragesenseair.blob.core.windows.net/docs/Dev/publicerat/PSP11704.pdf
+ https://rmtplusstoragesenseair.blob.core.windows.net/docs/Dev/publicerat/PSH11649.pdf
+ https://rmtplusstoragesenseair.blob.core.windows.net/docs/Dev/publicerat/TDE5531.pdf
+ https://rmtplusstoragesenseair.blob.core.windows.net/docs/Market/publicerat/TDE7318.pdf
+
+properties:
+ compatible:
+ const: senseair,sunrise-006-0-0007
+
+ reg:
+ maxItems: 1
+
+ ndry-gpios:
+ maxItems: 1
+ description:
+ Phandle to the GPIO line connected to the nDRY pin. Typically active low.
+
+ en-gpios:
+ maxItems: 1
+ description:
+ Phandle to the GPIO line connected to the EN pin. Typically active high.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ co2-sensor@68 {
+ compatible = "senseair,sunrise-006-0-0007";
+ reg = <0x68>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 07fb0d25fc15..8415e6067ce1 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1008,6 +1008,8 @@ patternProperties:
description: Shenzhen SEI Robotics Co., Ltd
"^semtech,.*":
description: Semtech Corporation
+ "^senseair,.*":
+ description: Senseair AB
"^sensirion,.*":
description: Sensirion AG
"^sensortek,.*":
--
2.32.0
next prev parent reply other threads:[~2021-09-09 9:45 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-09 9:45 [PATCH v5 0/4] iio: chemical: Add Senseair Sunrise CO2 sensor Jacopo Mondi
2021-09-09 9:45 ` Jacopo Mondi [this message]
2021-09-09 9:45 ` [PATCH v5 2/4] iio: ABI: docs: Document Senseair Sunrise ABI Jacopo Mondi
2021-09-09 9:45 ` [PATCH v5 3/4] iio: chemical: Add Senseair Sunrise 006-0-007 driver Jacopo Mondi
2021-09-09 12:04 ` Peter Rosin
2021-09-20 13:02 ` Jacopo Mondi
2021-09-09 13:01 ` Andy Shevchenko
2021-09-09 13:03 ` Andy Shevchenko
2021-09-11 15:12 ` Jonathan Cameron
2021-09-11 15:29 ` Jonathan Cameron
2021-09-09 9:45 ` [PATCH v5 4/4] iio: ABI: Document in_concentration_co2_scale Jacopo Mondi
2021-09-09 13:05 ` Andy Shevchenko
2021-09-10 10:47 ` Jonathan Cameron
2021-09-11 15:04 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210909094537.218064-2-jacopo@jmondi.org \
--to=jacopo@jmondi.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=matt.ranostay@konsulko.com \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox