[PATCH] iio: imu: inv_icm42600: Fix I2C init possible nack

[PATCH] iio: imu: inv_icm42600: Fix I2C init possible nack

[Jean-Baptiste Maneyrol]

From: Fawzi Khaber <fawzi.khaber@tdk.com>

This register write to REG_INTF_CONFIG6 enables a spike filter that
is impacting the line and can prevent the I2C ACK to be seen by the
controller. So we don't test the return value.

Signed-off-by: Fawzi Khaber <fawzi.khaber@tdk.com>
---
 drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
index 33d9afb1ba91..9c1e373a5daf 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
@@ -18,12 +18,16 @@ static int inv_icm42600_i2c_bus_setup(struct inv_icm42600_state *st)
 	unsigned int mask, val;
 	int ret;

-	/* setup interface registers */
-	ret = regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG6,
+	/*
+	 * setup interface registers
+	 * This register write to REG_INTF_CONFIG6 enables a spike filter that
+	 * is impacting the line and can prevent the I2C ACK to be seen by the
+	 * controller. So we don't test the return value.
+	 */
+	regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG6,
 				 INV_ICM42600_INTF_CONFIG6_MASK,
 				 INV_ICM42600_INTF_CONFIG6_I3C_EN);
-	if (ret)
-		return ret;
+

 	ret = regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG4,
 				 INV_ICM42600_INTF_CONFIG4_I3C_BUS_ONLY, 0);
--
2.25.1

Re: [PATCH] iio: imu: inv_icm42600: Fix I2C init possible nack

[Jonathan Cameron]

On Thu, 31 Mar 2022 11:11:21 +0200
Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> wrote:

> From: Fawzi Khaber <fawzi.khaber@tdk.com>
> 
> This register write to REG_INTF_CONFIG6 enables a spike filter that
> is impacting the line and can prevent the I2C ACK to be seen by the
> controller. So we don't test the return value.
> 
> Signed-off-by: Fawzi Khaber <fawzi.khaber@tdk.com>

Jean-Baptiste, this needs your sign-off as well as you were part of the
path the patch is taking to mainline (see the DCO stuff in submitting
patches).

Thanks,

Jonathan

> ---
>  drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c | 12 ++++++++----
>  1 file changed, 8 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
> index 33d9afb1ba91..9c1e373a5daf 100644
> --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
> +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
> @@ -18,12 +18,16 @@ static int inv_icm42600_i2c_bus_setup(struct inv_icm42600_state *st)
>  	unsigned int mask, val;
>  	int ret;
> 
> -	/* setup interface registers */
> -	ret = regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG6,
> +	/*
> +	 * setup interface registers
> +	 * This register write to REG_INTF_CONFIG6 enables a spike filter that
> +	 * is impacting the line and can prevent the I2C ACK to be seen by the
> +	 * controller. So we don't test the return value.
> +	 */
> +	regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG6,
>  				 INV_ICM42600_INTF_CONFIG6_MASK,
>  				 INV_ICM42600_INTF_CONFIG6_I3C_EN);
> -	if (ret)
> -		return ret;
> +
Drop this additional blank line.  One is enough!
> 
>  	ret = regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG4,
>  				 INV_ICM42600_INTF_CONFIG4_I3C_BUS_ONLY, 0);
> --
> 2.25.1