From: Jonathan Cameron <jic23@kernel.org>
To: gregkh@linuxfoundation.org, linux-iio@vger.kernel.org
Subject: [PULL] 1st set of IIO fixes for 5.19
Date: Sun, 19 Jun 2022 17:50:25 +0100 [thread overview]
Message-ID: <20220619175025.72b3edb4@jic23-huawei> (raw)
The following changes since commit 57ae8a492116910bad2b3497ffe555b3a4b4180f:
Merge tag 'driver-core-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core (2022-04-30 10:24:21 -0700)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-for-5.19a
for you to fetch changes up to 70171ed6dc53d2f580166d47f5b66cf51a6d0092:
iio:proximity:sx9324: Check ret value of device_property_read_u32_array() (2022-06-19 17:22:49 +0100)
----------------------------------------------------------------
1st set of IIO fixes for the 5.19 cycle.
Most of these have been in next for a long time. Unfortunately there
was one stray patch in the branch (wasn't a fix), so I've just rebased
to remove that.
* testing
- Fix a missing MODULE_LICENSE() warning by restricting possible build
configs.
* Various drivers
- Fix ordering of iio_get_trigger() being called before
iio_trigger_register()
* adi,admv1014
- Fix dubious x & !y warning.
* adi,axi-adc
- Fix missing of_node_put() in error and normal paths.
* aspeed,adc
- Add missing of_node_put()
* fsl,mma8452
- Fix broken probing from device tree.
- Drop check on return value of i2c write to device to cause reset as
ACK will be missing (device reset before sending it).
* fsl,vf610
- Fix documentation of in_conversion_mode ABI.
* iio-trig-sysfs
- Ensure irq work has finished before freeing the trigger.
* invensense,mpu3050
- Disable regulators in error path.
* invensense,icm42600
- Fix collision of enum value of 0 with error path where 0 is no match.
* renesas,rzg2l_Adc
- Add missing fwnode_handle_put() in error path.
* rescale
- Fix a boolean logic bug for detection of raw + scale affecting an
obscure corner case.
* semtech,sx9324
- Check return value of read of pin_defs
* st,stm32-adc:
- Fix interaction across ADC instances for some supported devices.
- Drop false spurious IRQ messages.
- Fix calibration value handling. If we can't calibrate don't expose the
vref_int channel.
- Fix maximum clock rate for stm32pm15x
* ti,ads131e08
- Add missing fwnode_handle_put() in error paths.
* xilinx,ams
- Fix variable checked for error from platform_get_irq()
* x-powers,axp288
- Overide TS_PIN bias current for boards where it is not correctly
initialized.
* yamaha,yas530
- Fix inverted check on calibration data being all zeros.
----------------------------------------------------------------
Aashish Sharma (1):
iio:proximity:sx9324: Check ret value of device_property_read_u32_array()
Antoniu Miclaus (1):
iio: freq: admv1014: Fix warning about dubious x & !y and improve readability
Baruch Siach (1):
iio: adc: vf610: fix conversion mode sysfs node name
Dmitry Rokosov (5):
iio:accel:bma180: rearrange iio trigger get and register
iio:accel:kxcjk-1013: rearrange iio trigger get and register
iio:accel:mxc4005: rearrange iio trigger get and register
iio:chemical:ccs811: rearrange iio trigger get and register
iio:humidity:hts221: rearrange iio trigger get and register
Haibo Chen (2):
iio: mma8452: fix probe fail when device tree compatible is used.
iio: accel: mma8452: ignore the return value of reset operation
Hans de Goede (1):
iio: adc: axp288: Override TS pin bias current for some models
Jean-Baptiste Maneyrol (1):
iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value)
Jialin Zhang (2):
iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties()
iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels()
Liam Beguin (1):
iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m
Linus Walleij (2):
iio: magnetometer: yas530: Fix memchr_inv() misuse
iio: afe: rescale: Fix boolean logic bug
Lv Ruyi (1):
iio: adc: xilinx-ams: fix return error variable
Miaoqian Lin (2):
iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data
iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client
Olivier Moysan (2):
iio: adc: stm32: fix vrefint wrong calibration value handling
iio: adc: stm32: fix maximum clock rate for stm32mp15x
Vincent Whitchurch (1):
iio: trigger: sysfs: fix use-after-free on remove
Yannick Brosseau (2):
iio: adc: stm32: Fix ADCs iteration in irq handler
iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message
Zheyu Ma (1):
iio: gyro: mpu3050: Fix the error handling in mpu3050_power_up()
Documentation/ABI/testing/sysfs-bus-iio-vf610 | 2 +-
drivers/iio/accel/bma180.c | 3 +-
drivers/iio/accel/kxcjk-1013.c | 4 +--
drivers/iio/accel/mma8452.c | 22 +++++++++-----
drivers/iio/accel/mxc4005.c | 4 +--
drivers/iio/adc/adi-axi-adc.c | 3 ++
drivers/iio/adc/aspeed_adc.c | 1 +
drivers/iio/adc/axp288_adc.c | 8 +++++
drivers/iio/adc/rzg2l_adc.c | 8 +++--
drivers/iio/adc/stm32-adc-core.c | 9 ++++--
drivers/iio/adc/stm32-adc.c | 37 +++++++++++-------------
drivers/iio/adc/ti-ads131e08.c | 10 +++++--
drivers/iio/adc/xilinx-ams.c | 2 +-
drivers/iio/afe/iio-rescale.c | 2 +-
drivers/iio/chemical/ccs811.c | 4 +--
drivers/iio/frequency/admv1014.c | 6 ++--
drivers/iio/gyro/mpu3050-core.c | 1 +
drivers/iio/humidity/hts221_buffer.c | 5 +++-
drivers/iio/imu/inv_icm42600/inv_icm42600.h | 1 +
drivers/iio/imu/inv_icm42600/inv_icm42600_core.c | 2 +-
drivers/iio/magnetometer/yamaha-yas530.c | 2 +-
drivers/iio/proximity/sx9324.c | 3 ++
drivers/iio/test/Kconfig | 2 +-
drivers/iio/test/Makefile | 2 +-
drivers/iio/trigger/iio-trig-sysfs.c | 1 +
25 files changed, 92 insertions(+), 52 deletions(-)
next reply other threads:[~2022-06-19 16:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-19 16:50 Jonathan Cameron [this message]
2022-06-20 7:50 ` [PULL] 1st set of IIO fixes for 5.19 Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220619175025.72b3edb4@jic23-huawei \
--to=jic23@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox