[PULL] 1st set of IIO fixes for 5.19

[PULL] 1st set of IIO fixes for 5.19

[Jonathan Cameron]

The following changes since commit 57ae8a492116910bad2b3497ffe555b3a4b4180f:

  Merge tag 'driver-core-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core (2022-04-30 10:24:21 -0700)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-for-5.19a

for you to fetch changes up to 70171ed6dc53d2f580166d47f5b66cf51a6d0092:

  iio:proximity:sx9324: Check ret value of device_property_read_u32_array() (2022-06-19 17:22:49 +0100)

----------------------------------------------------------------
1st set of IIO fixes for the 5.19 cycle.

Most of these have been in next for a long time. Unfortunately there
was one stray patch in the branch (wasn't a fix), so I've just rebased
to remove that.

* testing
  - Fix a missing MODULE_LICENSE() warning by restricting possible build
    configs.
* Various drivers
  - Fix ordering of iio_get_trigger() being called before
    iio_trigger_register()
* adi,admv1014
  - Fix dubious x & !y warning.
* adi,axi-adc
  - Fix missing of_node_put() in error and normal paths.
* aspeed,adc
  - Add missing of_node_put()
* fsl,mma8452
  - Fix broken probing from device tree.
  - Drop check on return value of i2c write to device to cause reset as
    ACK will be missing (device reset before sending it).
* fsl,vf610
  - Fix documentation of in_conversion_mode ABI.
* iio-trig-sysfs
  - Ensure irq work has finished before freeing the trigger.
* invensense,mpu3050
 - Disable regulators in error path.
* invensense,icm42600
  - Fix collision of enum value of 0 with error path where 0 is no match.
* renesas,rzg2l_Adc
  - Add missing fwnode_handle_put() in error path.
* rescale
  - Fix a boolean logic bug for detection of raw + scale affecting an
    obscure corner case.
* semtech,sx9324
  - Check return value of read of pin_defs
* st,stm32-adc:
  - Fix interaction across ADC instances for some supported devices.
  - Drop false spurious IRQ messages.
  - Fix calibration value handling.  If we can't calibrate don't expose the
    vref_int channel.
  - Fix maximum clock rate for stm32pm15x
* ti,ads131e08
  - Add missing fwnode_handle_put() in error paths.
* xilinx,ams
  - Fix variable checked for error from platform_get_irq()
* x-powers,axp288
  - Overide TS_PIN bias current for boards where it is not correctly
    initialized.
* yamaha,yas530
  - Fix inverted check on calibration data being all zeros.

----------------------------------------------------------------
Aashish Sharma (1):
      iio:proximity:sx9324: Check ret value of device_property_read_u32_array()

Antoniu Miclaus (1):
      iio: freq: admv1014: Fix warning about dubious x & !y and improve readability

Baruch Siach (1):
      iio: adc: vf610: fix conversion mode sysfs node name

Dmitry Rokosov (5):
      iio:accel:bma180: rearrange iio trigger get and register
      iio:accel:kxcjk-1013: rearrange iio trigger get and register
      iio:accel:mxc4005: rearrange iio trigger get and register
      iio:chemical:ccs811: rearrange iio trigger get and register
      iio:humidity:hts221: rearrange iio trigger get and register

Haibo Chen (2):
      iio: mma8452: fix probe fail when device tree compatible is used.
      iio: accel: mma8452: ignore the return value of reset operation

Hans de Goede (1):
      iio: adc: axp288: Override TS pin bias current for some models

Jean-Baptiste Maneyrol (1):
      iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value)

Jialin Zhang (2):
      iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties()
      iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels()

Liam Beguin (1):
      iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m

Linus Walleij (2):
      iio: magnetometer: yas530: Fix memchr_inv() misuse
      iio: afe: rescale: Fix boolean logic bug

Lv Ruyi (1):
      iio: adc: xilinx-ams: fix return error variable

Miaoqian Lin (2):
      iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data
      iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client

Olivier Moysan (2):
      iio: adc: stm32: fix vrefint wrong calibration value handling
      iio: adc: stm32: fix maximum clock rate for stm32mp15x

Vincent Whitchurch (1):
      iio: trigger: sysfs: fix use-after-free on remove

Yannick Brosseau (2):
      iio: adc: stm32: Fix ADCs iteration in irq handler
      iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message

Zheyu Ma (1):
      iio: gyro: mpu3050: Fix the error handling in mpu3050_power_up()

 Documentation/ABI/testing/sysfs-bus-iio-vf610    |  2 +-
 drivers/iio/accel/bma180.c                       |  3 +-
 drivers/iio/accel/kxcjk-1013.c                   |  4 +--
 drivers/iio/accel/mma8452.c                      | 22 +++++++++-----
 drivers/iio/accel/mxc4005.c                      |  4 +--
 drivers/iio/adc/adi-axi-adc.c                    |  3 ++
 drivers/iio/adc/aspeed_adc.c                     |  1 +
 drivers/iio/adc/axp288_adc.c                     |  8 +++++
 drivers/iio/adc/rzg2l_adc.c                      |  8 +++--
 drivers/iio/adc/stm32-adc-core.c                 |  9 ++++--
 drivers/iio/adc/stm32-adc.c                      | 37 +++++++++++-------------
 drivers/iio/adc/ti-ads131e08.c                   | 10 +++++--
 drivers/iio/adc/xilinx-ams.c                     |  2 +-
 drivers/iio/afe/iio-rescale.c                    |  2 +-
 drivers/iio/chemical/ccs811.c                    |  4 +--
 drivers/iio/frequency/admv1014.c                 |  6 ++--
 drivers/iio/gyro/mpu3050-core.c                  |  1 +
 drivers/iio/humidity/hts221_buffer.c             |  5 +++-
 drivers/iio/imu/inv_icm42600/inv_icm42600.h      |  1 +
 drivers/iio/imu/inv_icm42600/inv_icm42600_core.c |  2 +-
 drivers/iio/magnetometer/yamaha-yas530.c         |  2 +-
 drivers/iio/proximity/sx9324.c                   |  3 ++
 drivers/iio/test/Kconfig                         |  2 +-
 drivers/iio/test/Makefile                        |  2 +-
 drivers/iio/trigger/iio-trig-sysfs.c             |  1 +
 25 files changed, 92 insertions(+), 52 deletions(-)

Re: [PULL] 1st set of IIO fixes for 5.19

[Greg KH]

On Sun, Jun 19, 2022 at 05:50:25PM +0100, Jonathan Cameron wrote:
> The following changes since commit 57ae8a492116910bad2b3497ffe555b3a4b4180f:
> 
>   Merge tag 'driver-core-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core (2022-04-30 10:24:21 -0700)
> 
> are available in the Git repository at:
> 
>   https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-for-5.19a
> 
> for you to fetch changes up to 70171ed6dc53d2f580166d47f5b66cf51a6d0092:
> 
>   iio:proximity:sx9324: Check ret value of device_property_read_u32_array() (2022-06-19 17:22:49 +0100)
> 

Pulled and pushed out, thanks.

greg k-h