[PATCH v1 1/1] iio: chemical: scd30_core: use sysfs_emit() to instead of scnprintf()

[PATCH v1 1/1] iio: chemical: scd30_core: use sysfs_emit() to instead of scnprintf()

[Andy Shevchenko]

Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/iio/chemical/scd30_core.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/chemical/scd30_core.c b/drivers/iio/chemical/scd30_core.c
index 682fca39d14d..e0bb1dd5e790 100644
--- a/drivers/iio/chemical/scd30_core.c
+++ b/drivers/iio/chemical/scd30_core.c
@@ -354,7 +354,7 @@ static ssize_t sampling_frequency_available_show(struct device *dev, struct devi
 	ssize_t len = 0;
 
 	do {
-		len += scnprintf(buf + len, PAGE_SIZE - len, "0.%09u ", 1000000000 / i);
+		len += sysfs_emit_at(buf, len, "0.%09u ", 1000000000 / i);
 		/*
 		 * Not all values fit PAGE_SIZE buffer hence print every 6th
 		 * (each frequency differs by 6s in time domain from the
@@ -380,7 +380,7 @@ static ssize_t calibration_auto_enable_show(struct device *dev, struct device_at
 	ret = scd30_command_read(state, CMD_ASC, &val);
 	mutex_unlock(&state->lock);
 
-	return ret ?: sprintf(buf, "%d\n", val);
+	return ret ?: sysfs_emit(buf, "%d\n", val);
 }
 
 static ssize_t calibration_auto_enable_store(struct device *dev, struct device_attribute *attr,
@@ -414,7 +414,7 @@ static ssize_t calibration_forced_value_show(struct device *dev, struct device_a
 	ret = scd30_command_read(state, CMD_FRC, &val);
 	mutex_unlock(&state->lock);
 
-	return ret ?: sprintf(buf, "%d\n", val);
+	return ret ?: sysfs_emit(buf, "%d\n", val);
 }
 
 static ssize_t calibration_forced_value_store(struct device *dev, struct device_attribute *attr,
-- 
2.39.0

Re: [PATCH v1 1/1] iio: chemical: scd30_core: use sysfs_emit() to instead of scnprintf()

[Jonathan Cameron]

On Fri, 13 Jan 2023 16:11:17 +0200
Andy Shevchenko <andriy.shevchenko@linux.intel.com> wrote:

> Follow the advice of the Documentation/filesystems/sysfs.rst and show()
> should only use sysfs_emit() or sysfs_emit_at() when formatting the
> value to be returned to user space.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Applied

Thanks,

> ---
>  drivers/iio/chemical/scd30_core.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/iio/chemical/scd30_core.c b/drivers/iio/chemical/scd30_core.c
> index 682fca39d14d..e0bb1dd5e790 100644
> --- a/drivers/iio/chemical/scd30_core.c
> +++ b/drivers/iio/chemical/scd30_core.c
> @@ -354,7 +354,7 @@ static ssize_t sampling_frequency_available_show(struct device *dev, struct devi
>  	ssize_t len = 0;
>  
>  	do {
> -		len += scnprintf(buf + len, PAGE_SIZE - len, "0.%09u ", 1000000000 / i);
> +		len += sysfs_emit_at(buf, len, "0.%09u ", 1000000000 / i);
>  		/*
>  		 * Not all values fit PAGE_SIZE buffer hence print every 6th
>  		 * (each frequency differs by 6s in time domain from the
> @@ -380,7 +380,7 @@ static ssize_t calibration_auto_enable_show(struct device *dev, struct device_at
>  	ret = scd30_command_read(state, CMD_ASC, &val);
>  	mutex_unlock(&state->lock);
>  
> -	return ret ?: sprintf(buf, "%d\n", val);
> +	return ret ?: sysfs_emit(buf, "%d\n", val);
>  }
>  
>  static ssize_t calibration_auto_enable_store(struct device *dev, struct device_attribute *attr,
> @@ -414,7 +414,7 @@ static ssize_t calibration_forced_value_show(struct device *dev, struct device_a
>  	ret = scd30_command_read(state, CMD_FRC, &val);
>  	mutex_unlock(&state->lock);
>  
> -	return ret ?: sprintf(buf, "%d\n", val);
> +	return ret ?: sysfs_emit(buf, "%d\n", val);
>  }
>  
>  static ssize_t calibration_forced_value_store(struct device *dev, struct device_attribute *attr,