[RESEND PATCH v6 1/2] iio: adc: axp20x_adc: Minor code cleanups

[RESEND PATCH v6 1/2] iio: adc: axp20x_adc: Minor code cleanups

[Aidan MacDonald]

The code may be clearer if parameters are not re-purposed to hold
temporary results like register values, so introduce local variables
as necessary to avoid that. Regroup macros based on chip type, and
use the FIELD_PREP() macro instead of a hand-rolled version.

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
---
This is a resend of a preparatory patch from a larger series adding support
for the AXP192 PMIC[1]. Since I don't think there's much hope of getting it
merged in one development cycle, there's no point letting these cleanups sit
around unapplied -- apply them whenever convienient!

[1] https://lore.kernel.org/all/20221016234335.904212-1-aidanmacdonald.0x0@gmail.com/

---
 drivers/iio/adc/axp20x_adc.c | 61 +++++++++++++++++++-----------------
 1 file changed, 32 insertions(+), 29 deletions(-)

diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c
index 53bf7d4899d2..ab25e6e1ff65 100644
--- a/drivers/iio/adc/axp20x_adc.c
+++ b/drivers/iio/adc/axp20x_adc.c
@@ -5,6 +5,7 @@
  *	Quentin Schulz <quentin.schulz@free-electrons.com>
  */
 
+#include <linux/bitfield.h>
 #include <linux/completion.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
@@ -22,20 +23,20 @@
 #include <linux/mfd/axp20x.h>
 
 #define AXP20X_ADC_EN1_MASK			GENMASK(7, 0)
-
 #define AXP20X_ADC_EN2_MASK			(GENMASK(3, 2) | BIT(7))
+
 #define AXP22X_ADC_EN1_MASK			(GENMASK(7, 5) | BIT(0))
 
 #define AXP20X_GPIO10_IN_RANGE_GPIO0		BIT(0)
 #define AXP20X_GPIO10_IN_RANGE_GPIO1		BIT(1)
-#define AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(x)	((x) & BIT(0))
-#define AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(x)	(((x) & BIT(0)) << 1)
 
 #define AXP20X_ADC_RATE_MASK			GENMASK(7, 6)
-#define AXP813_V_I_ADC_RATE_MASK		GENMASK(5, 4)
-#define AXP813_ADC_RATE_MASK			(AXP20X_ADC_RATE_MASK | AXP813_V_I_ADC_RATE_MASK)
 #define AXP20X_ADC_RATE_HZ(x)			((ilog2((x) / 25) << 6) & AXP20X_ADC_RATE_MASK)
+
 #define AXP22X_ADC_RATE_HZ(x)			((ilog2((x) / 100) << 6) & AXP20X_ADC_RATE_MASK)
+
+#define AXP813_V_I_ADC_RATE_MASK		GENMASK(5, 4)
+#define AXP813_ADC_RATE_MASK			(AXP20X_ADC_RATE_MASK | AXP813_V_I_ADC_RATE_MASK)
 #define AXP813_TS_GPIO0_ADC_RATE_HZ(x)		AXP20X_ADC_RATE_HZ(x)
 #define AXP813_V_I_ADC_RATE_HZ(x)		((ilog2((x) / 100) << 4) & AXP813_V_I_ADC_RATE_MASK)
 #define AXP813_ADC_RATE_HZ(x)			(AXP20X_ADC_RATE_HZ(x) | AXP813_V_I_ADC_RATE_HZ(x))
@@ -234,7 +235,7 @@ static int axp20x_adc_raw(struct iio_dev *indio_dev,
 			  struct iio_chan_spec const *chan, int *val)
 {
 	struct axp20x_adc_iio *info = iio_priv(indio_dev);
-	int size = 12;
+	int ret, size;
 
 	/*
 	 * N.B.:  Unlike the Chinese datasheets tell, the charging current is
@@ -246,10 +247,11 @@ static int axp20x_adc_raw(struct iio_dev *indio_dev,
 	else
 		size = 12;
 
-	*val = axp20x_read_variable_width(info->regmap, chan->address, size);
-	if (*val < 0)
-		return *val;
+	ret = axp20x_read_variable_width(info->regmap, chan->address, size);
+	if (ret < 0)
+		return ret;
 
+	*val = ret;
 	return IIO_VAL_INT;
 }
 
@@ -257,11 +259,13 @@ static int axp22x_adc_raw(struct iio_dev *indio_dev,
 			  struct iio_chan_spec const *chan, int *val)
 {
 	struct axp20x_adc_iio *info = iio_priv(indio_dev);
+	int ret;
 
-	*val = axp20x_read_variable_width(info->regmap, chan->address, 12);
-	if (*val < 0)
-		return *val;
+	ret = axp20x_read_variable_width(info->regmap, chan->address, 12);
+	if (ret < 0)
+		return ret;
 
+	*val = ret;
 	return IIO_VAL_INT;
 }
 
@@ -269,11 +273,13 @@ static int axp813_adc_raw(struct iio_dev *indio_dev,
 			  struct iio_chan_spec const *chan, int *val)
 {
 	struct axp20x_adc_iio *info = iio_priv(indio_dev);
+	int ret;
 
-	*val = axp20x_read_variable_width(info->regmap, chan->address, 12);
-	if (*val < 0)
-		return *val;
+	ret = axp20x_read_variable_width(info->regmap, chan->address, 12);
+	if (ret < 0)
+		return ret;
 
+	*val = ret;
 	return IIO_VAL_INT;
 }
 
@@ -443,27 +449,27 @@ static int axp20x_adc_offset_voltage(struct iio_dev *indio_dev, int channel,
 				     int *val)
 {
 	struct axp20x_adc_iio *info = iio_priv(indio_dev);
+	unsigned int regval;
 	int ret;
 
-	ret = regmap_read(info->regmap, AXP20X_GPIO10_IN_RANGE, val);
+	ret = regmap_read(info->regmap, AXP20X_GPIO10_IN_RANGE, &regval);
 	if (ret < 0)
 		return ret;
 
 	switch (channel) {
 	case AXP20X_GPIO0_V:
-		*val &= AXP20X_GPIO10_IN_RANGE_GPIO0;
+		regval = FIELD_GET(AXP20X_GPIO10_IN_RANGE_GPIO0, regval);
 		break;
 
 	case AXP20X_GPIO1_V:
-		*val &= AXP20X_GPIO10_IN_RANGE_GPIO1;
+		regval = FIELD_GET(AXP20X_GPIO10_IN_RANGE_GPIO1, regval);
 		break;
 
 	default:
 		return -EINVAL;
 	}
 
-	*val = *val ? 700000 : 0;
-
+	*val = regval ? 700000 : 0;
 	return IIO_VAL_INT;
 }
 
@@ -548,7 +554,7 @@ static int axp20x_write_raw(struct iio_dev *indio_dev,
 			    long mask)
 {
 	struct axp20x_adc_iio *info = iio_priv(indio_dev);
-	unsigned int reg, regval;
+	unsigned int regmask, regval;
 
 	/*
 	 * The AXP20X PMIC allows the user to choose between 0V and 0.7V offsets
@@ -560,25 +566,22 @@ static int axp20x_write_raw(struct iio_dev *indio_dev,
 	if (val != 0 && val != 700000)
 		return -EINVAL;
 
-	val = val ? 1 : 0;
-
 	switch (chan->channel) {
 	case AXP20X_GPIO0_V:
-		reg = AXP20X_GPIO10_IN_RANGE_GPIO0;
-		regval = AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(val);
+		regmask = AXP20X_GPIO10_IN_RANGE_GPIO0;
+		regval = FIELD_PREP(AXP20X_GPIO10_IN_RANGE_GPIO0, !!val);
 		break;
 
 	case AXP20X_GPIO1_V:
-		reg = AXP20X_GPIO10_IN_RANGE_GPIO1;
-		regval = AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(val);
+		regmask = AXP20X_GPIO10_IN_RANGE_GPIO1;
+		regval = FIELD_PREP(AXP20X_GPIO10_IN_RANGE_GPIO1, !!val);
 		break;
 
 	default:
 		return -EINVAL;
 	}
 
-	return regmap_update_bits(info->regmap, AXP20X_GPIO10_IN_RANGE, reg,
-				  regval);
+	return regmap_update_bits(info->regmap, AXP20X_GPIO10_IN_RANGE, regmask, regval);
 }
 
 static const struct iio_info axp20x_adc_iio_info = {
-- 
2.39.2

[RESEND PATCH v6 2/2] iio: adc: axp20x_adc: Replace adc_en2 flag with adc_en2_mask field

[Aidan MacDonald]

The adc_en2 flag is essentially specific to axp20x-compatible devices
because it hardcodes register values. Replace it with a mask field
so the register value can be specified in device match data.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
---
This is a resend of a preparatory patch from a larger series adding support
for the AXP192 PMIC[1]. Since I don't think there's much hope of getting it
merged in one development cycle, there's no point letting these cleanups sit
around unapplied -- apply them whenever convienient!

[1] https://lore.kernel.org/all/20221016234335.904212-1-aidanmacdonald.0x0@gmail.com/

---
 drivers/iio/adc/axp20x_adc.c | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c
index ab25e6e1ff65..75bda94dbce1 100644
--- a/drivers/iio/adc/axp20x_adc.c
+++ b/drivers/iio/adc/axp20x_adc.c
@@ -623,9 +623,9 @@ struct axp_data {
 	int				num_channels;
 	struct iio_chan_spec const	*channels;
 	unsigned long			adc_en1_mask;
+	unsigned long			adc_en2_mask;
 	int				(*adc_rate)(struct axp20x_adc_iio *info,
 						    int rate);
-	bool				adc_en2;
 	struct iio_map			*maps;
 };
 
@@ -634,8 +634,8 @@ static const struct axp_data axp20x_data = {
 	.num_channels = ARRAY_SIZE(axp20x_adc_channels),
 	.channels = axp20x_adc_channels,
 	.adc_en1_mask = AXP20X_ADC_EN1_MASK,
+	.adc_en2_mask = AXP20X_ADC_EN2_MASK,
 	.adc_rate = axp20x_adc_rate,
-	.adc_en2 = true,
 	.maps = axp20x_maps,
 };
 
@@ -645,7 +645,6 @@ static const struct axp_data axp22x_data = {
 	.channels = axp22x_adc_channels,
 	.adc_en1_mask = AXP22X_ADC_EN1_MASK,
 	.adc_rate = axp22x_adc_rate,
-	.adc_en2 = false,
 	.maps = axp22x_maps,
 };
 
@@ -655,7 +654,6 @@ static const struct axp_data axp813_data = {
 	.channels = axp813_adc_channels,
 	.adc_en1_mask = AXP22X_ADC_EN1_MASK,
 	.adc_rate = axp813_adc_rate,
-	.adc_en2 = false,
 	.maps = axp22x_maps,
 };
 
@@ -713,10 +711,10 @@ static int axp20x_probe(struct platform_device *pdev)
 	/* Enable the ADCs on IP */
 	regmap_write(info->regmap, AXP20X_ADC_EN1, info->data->adc_en1_mask);
 
-	if (info->data->adc_en2)
-		/* Enable GPIO0/1 and internal temperature ADCs */
+	if (info->data->adc_en2_mask)
 		regmap_update_bits(info->regmap, AXP20X_ADC_EN2,
-				   AXP20X_ADC_EN2_MASK, AXP20X_ADC_EN2_MASK);
+				   info->data->adc_en2_mask,
+				   info->data->adc_en2_mask);
 
 	/* Configure ADCs rate */
 	info->data->adc_rate(info, 100);
@@ -741,7 +739,7 @@ static int axp20x_probe(struct platform_device *pdev)
 fail_map:
 	regmap_write(info->regmap, AXP20X_ADC_EN1, 0);
 
-	if (info->data->adc_en2)
+	if (info->data->adc_en2_mask)
 		regmap_write(info->regmap, AXP20X_ADC_EN2, 0);
 
 	return ret;
@@ -757,7 +755,7 @@ static int axp20x_remove(struct platform_device *pdev)
 
 	regmap_write(info->regmap, AXP20X_ADC_EN1, 0);
 
-	if (info->data->adc_en2)
+	if (info->data->adc_en2_mask)
 		regmap_write(info->regmap, AXP20X_ADC_EN2, 0);
 
 	return 0;
-- 
2.39.2

Re: [RESEND PATCH v6 2/2] iio: adc: axp20x_adc: Replace adc_en2 flag with adc_en2_mask field

[Jonathan Cameron]

On Fri, 17 Feb 2023 15:34:04 +0000
Aidan MacDonald <aidanmacdonald.0x0@gmail.com> wrote:

> The adc_en2 flag is essentially specific to axp20x-compatible devices
> because it hardcodes register values. Replace it with a mask field
> so the register value can be specified in device match data.
> 
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
> ---
> This is a resend of a preparatory patch from a larger series adding support
> for the AXP192 PMIC[1]. Since I don't think there's much hope of getting it
> merged in one development cycle, there's no point letting these cleanups sit
> around unapplied -- apply them whenever convienient!
> 
> [1] https://lore.kernel.org/all/20221016234335.904212-1-aidanmacdonald.0x0@gmail.com/
Both applied to the togreg branch of iio.git, however we are to late
to hit this cycle, so these are queued up for next one and I'll only
push them out as testing until I can rebase on rc1.

Thanks,

Jonathan

> 
> ---
>  drivers/iio/adc/axp20x_adc.c | 16 +++++++---------
>  1 file changed, 7 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c
> index ab25e6e1ff65..75bda94dbce1 100644
> --- a/drivers/iio/adc/axp20x_adc.c
> +++ b/drivers/iio/adc/axp20x_adc.c
> @@ -623,9 +623,9 @@ struct axp_data {
>  	int				num_channels;
>  	struct iio_chan_spec const	*channels;
>  	unsigned long			adc_en1_mask;
> +	unsigned long			adc_en2_mask;
>  	int				(*adc_rate)(struct axp20x_adc_iio *info,
>  						    int rate);
> -	bool				adc_en2;
>  	struct iio_map			*maps;
>  };
>  
> @@ -634,8 +634,8 @@ static const struct axp_data axp20x_data = {
>  	.num_channels = ARRAY_SIZE(axp20x_adc_channels),
>  	.channels = axp20x_adc_channels,
>  	.adc_en1_mask = AXP20X_ADC_EN1_MASK,
> +	.adc_en2_mask = AXP20X_ADC_EN2_MASK,
>  	.adc_rate = axp20x_adc_rate,
> -	.adc_en2 = true,
>  	.maps = axp20x_maps,
>  };
>  
> @@ -645,7 +645,6 @@ static const struct axp_data axp22x_data = {
>  	.channels = axp22x_adc_channels,
>  	.adc_en1_mask = AXP22X_ADC_EN1_MASK,
>  	.adc_rate = axp22x_adc_rate,
> -	.adc_en2 = false,
>  	.maps = axp22x_maps,
>  };
>  
> @@ -655,7 +654,6 @@ static const struct axp_data axp813_data = {
>  	.channels = axp813_adc_channels,
>  	.adc_en1_mask = AXP22X_ADC_EN1_MASK,
>  	.adc_rate = axp813_adc_rate,
> -	.adc_en2 = false,
>  	.maps = axp22x_maps,
>  };
>  
> @@ -713,10 +711,10 @@ static int axp20x_probe(struct platform_device *pdev)
>  	/* Enable the ADCs on IP */
>  	regmap_write(info->regmap, AXP20X_ADC_EN1, info->data->adc_en1_mask);
>  
> -	if (info->data->adc_en2)
> -		/* Enable GPIO0/1 and internal temperature ADCs */
> +	if (info->data->adc_en2_mask)
>  		regmap_update_bits(info->regmap, AXP20X_ADC_EN2,
> -				   AXP20X_ADC_EN2_MASK, AXP20X_ADC_EN2_MASK);
> +				   info->data->adc_en2_mask,
> +				   info->data->adc_en2_mask);
>  
>  	/* Configure ADCs rate */
>  	info->data->adc_rate(info, 100);
> @@ -741,7 +739,7 @@ static int axp20x_probe(struct platform_device *pdev)
>  fail_map:
>  	regmap_write(info->regmap, AXP20X_ADC_EN1, 0);
>  
> -	if (info->data->adc_en2)
> +	if (info->data->adc_en2_mask)
>  		regmap_write(info->regmap, AXP20X_ADC_EN2, 0);
>  
>  	return ret;
> @@ -757,7 +755,7 @@ static int axp20x_remove(struct platform_device *pdev)
>  
>  	regmap_write(info->regmap, AXP20X_ADC_EN1, 0);
>  
> -	if (info->data->adc_en2)
> +	if (info->data->adc_en2_mask)
>  		regmap_write(info->regmap, AXP20X_ADC_EN2, 0);
>  
>  	return 0;