* [PULL] IIO: First set of new device support etc for 6.8
@ 2023-12-20 15:00 Jonathan Cameron
2023-12-20 16:14 ` Greg KH
0 siblings, 1 reply; 2+ messages in thread
From: Jonathan Cameron @ 2023-12-20 15:00 UTC (permalink / raw)
To: gregkh, linux-iio
The following changes since commit b85ea95d086471afb4ad062012a4d73cd328fa86:
Linux 6.7-rc1 (2023-11-12 16:19:07 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-6.8a
for you to fetch changes up to 2dfef50589aef3b9a2fa2190ae95b328fb664f89:
iio: adc: ad7091r: Align arguments to function call parenthesis (2023-12-17 14:56:45 +0000)
----------------------------------------------------------------
1st set of IIO new device support, features and cleanup for 6.8
New device support
------------------
adi,hmc425a
* Add support for ADRF5740 attenuators. Minor changes to driver needed
alongside new IDs.
aosong,ags02ma
* New driver for this volatile organic compounds sensor.
bosch,bmp280
* Add BMP390 (small amount of refactoring + ID)
bosch,bmi323
* New driver to support the BMI323 6-axis IMU.
honeywell,hsc030pa
* New driver supporting a huge number of SSC and HSC series pressure and
temperature sensors.
isil,isl76682
* New driver for this simple Ambient Light sensor.
liteon,ltr390
* New driver for this ambient and ultraviolet light sensor.
maxim,max34408
* New driver to support the MAX34408 and MAX34409 current monitoring ADCs.
melexis,mlx90635
* New driver for this Infrared contactless temperature sensor.
mirochip,mcp9600
* New driver for this thermocouple EMF convertor.
ti,hdc3020
* New driver for this integrated relative humidity and temperature
sensor.
vishay,veml6075
* New driver for this UVA and UVB light sensor.
General features
----------------
Device properties
* Add fwnode_property_match_property_string() helper to allow matching
single value property against an array of predefined strings.
* Use fwnode_property_string_array_count() inside
fwnode_property_match_string() instead of open coding the same.
checkpatch.pl
* Add exclusion of __aligned() from a warning reducing false positives
on IIO drivers (and hopefully beyond)
IIO Features
------------
core
* New light channel modifiers for UVA and UVB.
* Add IIO_CHAN_INFO_TROUGH as counterpart to IIO_CHAN_INFO_PEAK so that
we can support device that keep running track of the lowest value they
have seen in similar fashion to the existing peak tracking.
adi,adis library
* Use spi cs inactive delay even when a burst reading is performed.
As it's now used every time, can centralize the handling in the SPI
setup code in the driver.
adi,ad2s1210
* Support for fixed-mode to this resolver driver where the A0 and A1
pins are hard wired to config mode in which case position and config
must be read from appropriate config registers.
* Support reset GPIO if present.
adi,ad5791
* Allow configuration of presence of external amplifier in DT binding.
adi,adis16400
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
adi,adis16475
* Add spi-cs-inactive-delay-ns to bindings to allow it to be tweaked
if default delays are not quite enough for a specific board.
bosch,bmp280
* Enable multiple chip IDs per family of devices.
rohm,bu27008
* Add an illuminance channel calculated from RGB and IR data.
Cleanup
-------
Minor white space, typos and tidy up not explicitly called out.
Core
* Check that the available_scan_masks array passed to the IIO core
by a driver is sensible by ensuring the entries are ordered so the
minimum number of channels is enabled in the earlier entries (as they
will be selected if sufficient for the requested channels).
* Document that the available_scan_masks infrastructure doesn't currently
handle masks that don't fit in a long int.
* Improve intensity documentation to reflect that there is no expectation
of sensible units (it's dependent on a frequency sensitivity curve)
Various
* Use new device_property_match_property_string() to replace open coded
versions of the same thing.
* Fix a few MAINTAINERS filenames.
* i2c_get_match_data() and spi_get_device_match_data() pushed into
more drivers reducing boilerplate handling.
* Some unnecessary headers removed.
* ACPI_PTR() removals. It's rarely worth using this.
adi,ad7091r (early part of a series adding device support - useful in
their own right)
* Pass iio_dev directly an event handler rather than relying
on broken use of dev_get_drvdata() as drvdata is never set in this driver.
* Make sure alert is turned on.
adi,ad9467 (general driver fixing up as precursor to iio-backend proposal
which is under review for 6.9)
* Fix reset gpio handling to match expected polarity.
* Always handle error codes from spi_writes.
* Add a driver instance local mutex to avoid some races.
* Fix scale setting to align with available scale values.
* Split array of chip_info structures up into named individual elements.
* Convert to regmap.
honeywell,mprls0025pa
* Drop now unnecessary type references in DT binding for properties in
pascals.
invensense,mpu6050
* Don't eat a potentially useful return value from regmap_bulk_write()
invensense,icm42600
* Use max macro to improve code readability and save a few lines.
liteon,ltrf216a
* Improve prevision of light intensity.
microchip,mcp3911
* Use cleanup.h magic.
qcom,spmi*
* Fix wrong descriptions of SPMI reg fields in bindings.
Other
----
mailmap
* Update for Matt Ranostay
----------------------------------------------------------------
Amit Dhingra (1):
MAINTAINERS: correct file entry IIO LIGHT SENSOR GAIN-TIME_SCALE HELPERS
Ana-Maria Cusco (2):
dt-bindings: iio: hmc425a: add entry for ADRF5740 Attenuator
iio: amplifiers: hmc425a: add support for ADRF5740 Attenuator
Andrew Hepp (2):
dt-bindings: iio: Add MCP9600 thermocouple EMF converter
iio: temperature: Add MCP9600 thermocouple EMF converter
Andy Shevchenko (6):
device property: Use fwnode_property_string_array_count()
device property: Add fwnode_property_match_property_string()
iio: frequency: adf4377: Switch to device_property_match_property_string()
iio: frequency: admv1014: Switch to device_property_match_property_string()
iio: magnetometer: tmag5273: Switch to device_property_match_property_string()
iio: proximity: sx9324: Switch to device_property_match_property_string()
Angel Iglesias (4):
iio: pressure: bmp280: Use spi_get_device_match_data()
iio: pressure: bmp280: Rearrange vars in reverse xmas tree order
iio: pressure: bmp280: Allow multiple chips id per family of devices
iio: pressure: bmp280: Add support for BMP390
Anshul Dalal (5):
dt-bindings: iio: light: add ltr390
iio: light: driver for Lite-On ltr390
dt-bindings: vendor-prefixes: add aosong
dt-bindings: iio: chemical: add aosong,ags02ma
iio: chemical: add support for Aosong AGS02MA
Biju Das (1):
iio: pressure: bmp280: Use i2c_get_match_data()
Bragatheswaran Manickavel (1):
iio/imu: inv_icm42600: Use max() helper macros
Colin Ian King (1):
iio: imu: Fix spelling mistake "accelrometer" -> "accelerometer"
Crt Mori (2):
iio: temperature: mlx90635 MLX90635 IR Temperature sensor
dt-bindings: iio: temperature: add MLX90635 device
David Lechner (2):
iio: resolver: ad2s1210: add support for adi,fixed-mode
iio: resolver: ad2s1210: add reset gpio support
Ivan Mikhaylov (2):
dt-bindings: adc: provide max34408/9 device tree binding document
iio: adc: Add driver support for MAX34408/9
Jagath Jog J (3):
dt-bindings: iio: imu: Add Bosch BMI323
iio: imu: Add driver for BMI323 IMU
iio: imu: bmi323: Make the local structures static
Javier Carrasco (5):
iio: add modifiers for A and B ultraviolet light
dt-bindings: iio: light: add support for Vishay VEML6075
iio: light: add VEML6075 UVA and UVB light sensor driver
iio: core: introduce trough info element for minimum values
iio: ABI: document temperature and humidity peak/trough raw attributes
Jiapeng Chong (1):
iio: light: isl76682: remove unreachable code
Johan Hovold (6):
dt-bindings: iio/adc: qcom,spmi-iadc: fix reg description
dt-bindings: iio/adc: qcom,spmi-iadc: fix example node name
dt-bindings: iio/adc: qcom,spmi-iadc: clean up example
dt-bindings: iio/adc: qcom,spmi-rradc: clean up example
dt-bindings: iio/adc: qcom,spmi-vadc: fix example node names
dt-bindings: iio/adc: qcom,spmi-vadc: clean up examples
Jonathan Cameron (1):
iio: light: pa1203001: Drop ACPI_PTR() protection.
Jun Yan (1):
iio: accel: bmi088: update comments and Kconfig
Krzysztof Kozlowski (1):
dt-bindings: iio: honeywell,mprls0025pa: drop ref from pressure properties
Li peiyu (3):
iio: pressure: fix some word spelling errors
iio: humidity: Add driver for ti HDC302x humidity sensors
dt-bindings: iio: humidity: Add TI HDC302x support
Linus Walleij (1):
iio: proximity: irsd200: Drop unused include
Lukas Bulwahn (2):
MAINTAINERS: correct file entry in BOSCH SENSORTEC BMI323 IMU IIO DRIVER
MAINTAINERS: improve section MICROCHIP MCP3564 ADC DRIVER
Marcelo Schmitt (4):
scripts: checkpatch: Add __aligned to the list of attribute notes
iio: adc: ad7091r: Pass iio_dev to event handler
iio: adc: ad7091r: Set alert bit in config register
iio: adc: ad7091r: Align arguments to function call parenthesis
Marcus Folkesson (1):
iio: adc: mcp3911: simplify code with guard macro
Marek Vasut (3):
dt-bindings: iio: light: isl76682: Document ISL76682
iio: light: isl76682: Add ISL76682 driver
doc: iio: Document intensity scale as poorly defined
Matt Ranostay (1):
mailmap: Change email mapping from previous employers
Matti Vaittinen (3):
iio: bu27008: Add illuminance channel
iio: sanity check available_scan_masks array
iio: buffer: document known issue
Michael Hennerich (2):
dt-bindings: adi,ad5791: Add support for controlling RBUF
iio: dac: ad5791: Add support for controlling RBUF via devicetree
Nuno Sa (8):
iio: adc: ad9467: fix reset gpio handling
iio: adc: ad9467: don't ignore error codes
iio: adc: ad9467: add mutex to struct ad9467_state
iio: adc: ad9467: fix scale setting
iio: adc: ad9467: use spi_get_device_match_data()
iio: adc: ad9467: use chip_info variables instead of array
iio: adc: ad9467: use the more common !val NULL check
iio: adc: adi-axi-adc: convert to regmap
Petre Rodan (2):
dt-bindings: iio: pressure: add honeywell,hsc030
iio: pressure: driver for Honeywell HSC/SSC series
Ramona Gradinariu (3):
iio: imu: adis: Use spi cs inactive delay
dt-bindings: adis16475: Add 'spi-cs-inactive-delay-ns' property
dt-bindings: adis16460: Add 'spi-cs-inactive-delay-ns' property
Rob Herring (1):
dt-bindings: iio/adc: ti,palmas-gpadc: Drop incomplete example
Shreeya Patel (1):
iio: light: ltrf216a: Return floating point values
Su Hui (1):
iio: imu: inv_mpu6050: return callee's error code rather than -EINVAL
.mailmap | 7 +-
Documentation/ABI/testing/sysfs-bus-iio | 42 +-
.../bindings/iio/adc/maxim,max34408.yaml | 139 ++
.../bindings/iio/adc/qcom,spmi-iadc.yaml | 10 +-
.../bindings/iio/adc/qcom,spmi-rradc.yaml | 4 +-
.../bindings/iio/adc/qcom,spmi-vadc.yaml | 9 +-
.../bindings/iio/adc/ti,palmas-gpadc.yaml | 15 -
.../bindings/iio/amplifiers/adi,hmc425a.yaml | 4 +
.../bindings/iio/chemical/aosong,ags02ma.yaml | 47 +
.../devicetree/bindings/iio/dac/adi,ad5791.yaml | 5 +
.../bindings/iio/humidity/ti,hdc3020.yaml | 55 +
.../devicetree/bindings/iio/imu/adi,adis16460.yaml | 4 +
.../devicetree/bindings/iio/imu/adi,adis16475.yaml | 4 +
.../devicetree/bindings/iio/imu/bosch,bmi323.yaml | 77 +
.../bindings/iio/light/liteon,ltr390.yaml | 56 +
.../bindings/iio/light/vishay,veml6075.yaml | 39 +
.../bindings/iio/pressure/honeywell,hsc030pa.yaml | 142 ++
.../iio/pressure/honeywell,mprls0025pa.yaml | 2 -
.../bindings/iio/temperature/melexis,mlx90632.yaml | 19 +-
.../iio/temperature/microchip,mcp9600.yaml | 70 +
.../devicetree/bindings/trivial-devices.yaml | 2 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 56 +-
drivers/base/property.c | 37 +-
drivers/iio/accel/Kconfig | 7 +-
drivers/iio/accel/bmi088-accel-core.c | 2 +
drivers/iio/accel/bmi088-accel-spi.c | 2 +
drivers/iio/adc/Kconfig | 13 +-
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/ad7091r-base.c | 15 +-
drivers/iio/adc/ad9467.c | 207 +-
drivers/iio/adc/adi-axi-adc.c | 159 +-
drivers/iio/adc/max34408.c | 276 +++
drivers/iio/adc/mcp3911.c | 64 +-
drivers/iio/amplifiers/hmc425a.c | 23 +
drivers/iio/chemical/Kconfig | 11 +
drivers/iio/chemical/Makefile | 1 +
drivers/iio/chemical/ags02ma.c | 165 ++
drivers/iio/dac/ad5791.c | 9 +-
drivers/iio/frequency/adf4377.c | 16 +-
drivers/iio/frequency/admv1014.c | 31 +-
drivers/iio/humidity/hdc3020.c | 473 +++++
drivers/iio/imu/Kconfig | 1 +
drivers/iio/imu/Makefile | 1 +
drivers/iio/imu/adis.c | 18 +-
drivers/iio/imu/bmi323/Kconfig | 33 +
drivers/iio/imu/bmi323/Makefile | 7 +
drivers/iio/imu/bmi323/bmi323.h | 209 ++
drivers/iio/imu/bmi323/bmi323_core.c | 2139 ++++++++++++++++++++
drivers/iio/imu/bmi323/bmi323_i2c.c | 121 ++
drivers/iio/imu/bmi323/bmi323_spi.c | 92 +
drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c | 5 +-
drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c | 5 +-
drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c | 5 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 9 +-
drivers/iio/industrialio-buffer.c | 16 +
drivers/iio/industrialio-core.c | 66 +
drivers/iio/light/Kconfig | 37 +
drivers/iio/light/Makefile | 3 +
drivers/iio/light/isl76682.c | 345 ++++
drivers/iio/light/ltr390.c | 196 ++
drivers/iio/light/ltrf216a.c | 10 +-
drivers/iio/light/pa12203001.c | 2 +-
drivers/iio/light/rohm-bu27008.c | 201 +-
drivers/iio/light/veml6075.c | 474 +++++
drivers/iio/magnetometer/tmag5273.c | 10 +-
drivers/iio/pressure/Kconfig | 22 +
drivers/iio/pressure/Makefile | 3 +
drivers/iio/pressure/bmp280-core.c | 42 +-
drivers/iio/pressure/bmp280-i2c.c | 8 +-
drivers/iio/pressure/bmp280-spi.c | 10 +-
drivers/iio/pressure/bmp280.h | 6 +-
drivers/iio/pressure/hsc030pa.c | 494 +++++
drivers/iio/pressure/hsc030pa.h | 74 +
drivers/iio/pressure/hsc030pa_i2c.c | 69 +
drivers/iio/pressure/hsc030pa_spi.c | 61 +
drivers/iio/proximity/irsd200.c | 1 -
drivers/iio/proximity/sx9324.c | 24 +-
drivers/iio/resolver/ad2s1210.c | 162 +-
drivers/iio/temperature/Kconfig | 22 +
drivers/iio/temperature/Makefile | 2 +
drivers/iio/temperature/mcp9600.c | 139 ++
drivers/iio/temperature/mlx90635.c | 1097 ++++++++++
include/linux/iio/adc/adi-axi-adc.h | 4 +
include/linux/iio/types.h | 1 +
include/linux/property.h | 12 +
include/uapi/linux/iio/types.h | 2 +
scripts/checkpatch.pl | 1 +
tools/iio/iio_event_monitor.c | 2 +
89 files changed, 8176 insertions(+), 409 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/adc/maxim,max34408.yaml
create mode 100644 Documentation/devicetree/bindings/iio/chemical/aosong,ags02ma.yaml
create mode 100644 Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml
create mode 100644 Documentation/devicetree/bindings/iio/imu/bosch,bmi323.yaml
create mode 100644 Documentation/devicetree/bindings/iio/light/liteon,ltr390.yaml
create mode 100644 Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml
create mode 100644 Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml
create mode 100644 Documentation/devicetree/bindings/iio/temperature/microchip,mcp9600.yaml
create mode 100644 drivers/iio/adc/max34408.c
create mode 100644 drivers/iio/chemical/ags02ma.c
create mode 100644 drivers/iio/humidity/hdc3020.c
create mode 100644 drivers/iio/imu/bmi323/Kconfig
create mode 100644 drivers/iio/imu/bmi323/Makefile
create mode 100644 drivers/iio/imu/bmi323/bmi323.h
create mode 100644 drivers/iio/imu/bmi323/bmi323_core.c
create mode 100644 drivers/iio/imu/bmi323/bmi323_i2c.c
create mode 100644 drivers/iio/imu/bmi323/bmi323_spi.c
create mode 100644 drivers/iio/light/isl76682.c
create mode 100644 drivers/iio/light/ltr390.c
create mode 100644 drivers/iio/light/veml6075.c
create mode 100644 drivers/iio/pressure/hsc030pa.c
create mode 100644 drivers/iio/pressure/hsc030pa.h
create mode 100644 drivers/iio/pressure/hsc030pa_i2c.c
create mode 100644 drivers/iio/pressure/hsc030pa_spi.c
create mode 100644 drivers/iio/temperature/mcp9600.c
create mode 100644 drivers/iio/temperature/mlx90635.c
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-12-20 17:30 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-12-20 15:00 [PULL] IIO: First set of new device support etc for 6.8 Jonathan Cameron
2023-12-20 16:14 ` Greg KH
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox