From: Jonathan Cameron <jic23@kernel.org>
To: Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>
Cc: "linux-iio@vger.kernel.org" <linux-iio@vger.kernel.org>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andriy.shevchenko@linux.intel.com>,
"Cosmin Tanislav" <cosmin.tanislav@analog.com>,
"Mihail Chindris" <mihail.chindris@analog.com>,
"Rasmus Villemoes" <linux@rasmusvillemoes.dk>,
"Tomislav Denis" <tomislav.denis@avl.com>,
"Marek Vasut" <marex@denx.de>,
"Olivier Moysan" <olivier.moysan@foss.st.com>,
"Fabrice Gasnier" <fabrice.gasnier@foss.st.com>,
"Dmitry Baryshkov" <dmitry.baryshkov@linaro.org>,
"Marijn Suijten" <marijn.suijten@somainline.org>,
"Marius Cristea" <marius.cristea@microchip.com>,
"Ibrahim Tilki" <Ibrahim.Tilki@analog.com>,
"Jonathan Cameron" <Jonathan.Cameron@huawei.com>
Subject: Re: [PATCH v5 4/9] iio: adc: rzg2l_adc: Use device_for_each_child_node_scoped()
Date: Tue, 27 Feb 2024 19:16:49 +0000 [thread overview]
Message-ID: <20240227191649.1354500f@jic23-huawei> (raw)
In-Reply-To: <OSZPR01MB701960E650277C6390C0A722AA592@OSZPR01MB7019.jpnprd01.prod.outlook.com>
On Tue, 27 Feb 2024 09:52:28 +0000
Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> > From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> >
> > Switching to the _scoped() version removes the need for manual calling of fwnode_handle_put() in the
> > paths where the code exits the loop early. In this case that's all in error paths.
> >
> > Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> > ---
> > drivers/iio/adc/rzg2l_adc.c | 11 +++--------
> > 1 file changed, 3 insertions(+), 8 deletions(-)
> >
> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
>
I already picked up some of this series piecemeal so I'll keep going!
Applied to the togreg branch of iio.git and pushed out as testing for 0-day to take a look.
Thanks!
Jonathan
> Cheers,
> Prabhakar
>
> > diff --git a/drivers/iio/adc/rzg2l_adc.c b/drivers/iio/adc/rzg2l_adc.c index
> > 0921ff2d9b3a..cd3a7e46ea53 100644
> > --- a/drivers/iio/adc/rzg2l_adc.c
> > +++ b/drivers/iio/adc/rzg2l_adc.c
> > @@ -302,7 +302,6 @@ static irqreturn_t rzg2l_adc_isr(int irq, void *dev_id) static int
> > rzg2l_adc_parse_properties(struct platform_device *pdev, struct rzg2l_adc *adc) {
> > struct iio_chan_spec *chan_array;
> > - struct fwnode_handle *fwnode;
> > struct rzg2l_adc_data *data;
> > unsigned int channel;
> > int num_channels;
> > @@ -330,17 +329,13 @@ static int rzg2l_adc_parse_properties(struct platform_device *pdev, struct rzg2l
> > return -ENOMEM;
> >
> > i = 0;
> > - device_for_each_child_node(&pdev->dev, fwnode) {
> > + device_for_each_child_node_scoped(&pdev->dev, fwnode) {
> > ret = fwnode_property_read_u32(fwnode, "reg", &channel);
> > - if (ret) {
> > - fwnode_handle_put(fwnode);
> > + if (ret)
> > return ret;
> > - }
> >
> > - if (channel >= RZG2L_ADC_MAX_CHANNELS) {
> > - fwnode_handle_put(fwnode);
> > + if (channel >= RZG2L_ADC_MAX_CHANNELS)
> > return -EINVAL;
> > - }
> >
> > chan_array[i].type = IIO_VOLTAGE;
> > chan_array[i].indexed = 1;
> > --
> > 2.44.0
>
next prev parent reply other threads:[~2024-02-27 19:17 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-24 12:32 [PATCH v5 0/9] IIO: Use device_for_each_child_scope() Jonathan Cameron
2024-02-24 12:32 ` [PATCH v5 1/9] iio: temp: ltc2983: Use __free(fwnode_handle) and device_for_each_node_scoped() Jonathan Cameron
2024-02-26 8:35 ` Nuno Sá
2024-02-26 19:30 ` Jonathan Cameron
2024-02-27 8:08 ` Nuno Sá
2024-02-24 12:32 ` [PATCH v5 2/9] iio: adc: mcp3564: Use device_for_each_child_node_scoped() Jonathan Cameron
2024-02-24 12:32 ` [PATCH v5 3/9] iio: adc: qcom-spmi-adc5: " Jonathan Cameron
2024-02-24 12:32 ` [PATCH v5 4/9] iio: adc: rzg2l_adc: " Jonathan Cameron
2024-02-27 9:52 ` Prabhakar Mahadev Lad
2024-02-27 19:16 ` Jonathan Cameron [this message]
2024-02-24 12:32 ` [PATCH v5 5/9] iio: adc: stm32: " Jonathan Cameron
2024-02-29 11:34 ` Fabrice Gasnier
2024-02-24 12:32 ` [PATCH v5 6/9] iio: adc: ti-ads1015: " Jonathan Cameron
2024-02-24 12:32 ` [PATCH v5 7/9] iio: adc: ti-ads131e08: " Jonathan Cameron
2024-02-24 12:32 ` [PATCH v5 8/9] iio: dac: ad3552r: " Jonathan Cameron
2024-02-24 12:32 ` [PATCH v5 9/9] iio: dac: ad5770r: " Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240227191649.1354500f@jic23-huawei \
--to=jic23@kernel.org \
--cc=Ibrahim.Tilki@analog.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=cosmin.tanislav@analog.com \
--cc=dmitry.baryshkov@linaro.org \
--cc=fabrice.gasnier@foss.st.com \
--cc=linux-iio@vger.kernel.org \
--cc=linux@rasmusvillemoes.dk \
--cc=marex@denx.de \
--cc=marijn.suijten@somainline.org \
--cc=marius.cristea@microchip.com \
--cc=mihail.chindris@analog.com \
--cc=nuno.sa@analog.com \
--cc=olivier.moysan@foss.st.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=tomislav.denis@avl.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox