From: Vasileios Amoiridis <vassilisamir@gmail.com>
To: Jonathan Cameron <jic23@kernel.org>
Cc: Vasileios Amoiridis <vassilisamir@gmail.com>,
dpfrey@gmail.com, himanshujha199640@gmail.com, lars@metafoo.de,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
mike.looijmans@topic.nl
Subject: Re: [PATCH v2 19/19] iio: chemical: bme680: Refactorize reading functions
Date: Mon, 10 Jun 2024 01:02:50 +0200 [thread overview]
Message-ID: <20240609230250.GA316369@vamoiridPC> (raw)
In-Reply-To: <20240609121234.7a458c4a@jic23-huawei>
On Sun, Jun 09, 2024 at 12:12:34PM +0100, Jonathan Cameron wrote:
> On Thu, 6 Jun 2024 23:23:13 +0200
> Vasileios Amoiridis <vassilisamir@gmail.com> wrote:
>
> > The reading of the pressure and humidity value, requires an update
> > of the t_fine variable which happens by reading the temperature
> > value.
> >
> > So the bme680_read_{press/humid}() functions of the above sensors
> > are internally calling the equivalent bme680_read_temp() function
> > in order to update the t_fine value. By just looking at the code
> > this relation is a bit hidden and is not easy to understand why
> > those channels are not independent.
> >
> > This commit tries to clear these thing a bit by splitting the
> > bme680_{read/compensate}_{temp/press/humid}() to the following:
> >
> > i. bme680_read_{temp/press/humid}_adc(): read the raw value from
> > the sensor.
> >
> > ii. bme680_calc_t_fine(): calculate the t_fine variable.
> >
> > iii. bme680_get_t_fine(): get the t_fine variable.
> >
> > iv. bme680_compensate_{temp/press/humid}(): compensate the adc
> > values and return the calculated value.
> >
> > v. bme680_read_{temp/press/humid}(): combine calls of the
> > aforementioned functions to return the requested value.
> >
> > Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
>
> LGTM. All the other patches I didn't comment on are fine.
> 5 can wait for the non fix part of the series as it's just a typo.
> 7-14 look fine but probably have to wait for 1-4 and (v3 of) 6
> to get into the upstream of iio.git.
>
> 16,18,19 all look good.
>
> Note given you have two series that are dependent on fixes
> I might take v3 of patch 6 then send another fixes pull request
> before I rebase the main togreg branch on char-next (once it
> has those fixes).
>
> Getting complicated this cycle as a lot in flight!
>
> Thanks,
>
> Jonathan
Hi Jonathan,
Thank you very much again for the review, I will come back with the
requested fixes! I would appreciate a lot if you could push this fix
a bit forward, thanks!
Cheers,
Vasilis
prev parent reply other threads:[~2024-06-09 23:02 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-06 21:22 [PATCH v2 00/19] iio: chemical: bme680: Driver fixes and cleanup Vasileios Amoiridis
2024-06-06 21:22 ` [PATCH v2 01/19] iio: chemical: bme680: Fix pressure value output Vasileios Amoiridis
2024-06-09 11:00 ` Jonathan Cameron
2024-06-06 21:22 ` [PATCH v2 02/19] iio: chemical: bme680: Fix calibration data variable Vasileios Amoiridis
2024-06-09 11:00 ` Jonathan Cameron
2024-06-06 21:22 ` [PATCH v2 03/19] iio: chemical: bme680: Fix overflows in compensate() functions Vasileios Amoiridis
2024-06-09 11:01 ` Jonathan Cameron
2024-06-06 21:22 ` [PATCH v2 04/19] iio: chemical: bme680: Fix sensor data read operation Vasileios Amoiridis
2024-06-09 11:03 ` Jonathan Cameron
2024-06-06 21:22 ` [PATCH v2 05/19] iio: chemical: bme680: Fix typo in define Vasileios Amoiridis
2024-06-06 21:22 ` [PATCH v2 06/19] iio: chemical: bme680: Fix read/write ops to device by adding mutexes Vasileios Amoiridis
2024-06-09 10:56 ` Jonathan Cameron
2024-06-06 21:22 ` [PATCH v2 07/19] iio: chemical: bme680: Drop unnecessary casts and correct adc data types Vasileios Amoiridis
2024-06-06 21:23 ` [PATCH v2 08/19] iio: chemical: bme680: Remove remaining ACPI-only stuff Vasileios Amoiridis
2024-06-06 21:23 ` [PATCH v2 09/19] iio: chemical: bme680: Sort headers alphabetically Vasileios Amoiridis
2024-06-06 21:23 ` [PATCH v2 10/19] iio: chemical: bme680: Remove duplicate register read Vasileios Amoiridis
2024-06-06 21:23 ` [PATCH v2 11/19] iio: chemical: bme680: Use bulk reads for calibration data Vasileios Amoiridis
2024-06-06 21:23 ` [PATCH v2 12/19] iio: chemical: bme680: Allocate IIO device before chip initialization Vasileios Amoiridis
2024-06-06 21:23 ` [PATCH v2 13/19] iio: chemical: bme680: Add read buffers in DMA safe region Vasileios Amoiridis
2024-06-07 16:11 ` Vasileios Amoiridis
2024-06-06 21:23 ` [PATCH v2 13/19] iio: chemical: bme680: Add read buffers in read/write buffer union Vasileios Amoiridis
2024-06-06 21:23 ` [PATCH v2 13/19] iio: chemical: bme680: Add read buffers in union Vasileios Amoiridis
2024-06-07 16:12 ` Vasileios Amoiridis
2024-06-06 21:23 ` [PATCH v2 14/19] iio: chemical: bme680: Make error checks consistent Vasileios Amoiridis
2024-06-06 21:23 ` [PATCH v2 15/19] iio: chemical: bme680: Modify startup procedure Vasileios Amoiridis
2024-06-09 11:07 ` Jonathan Cameron
2024-06-06 21:23 ` [PATCH v2 16/19] iio: chemical: bme680: Move probe errors to dev_err_probe() Vasileios Amoiridis
2024-06-06 21:23 ` [PATCH v2 17/19] iio: chemical: bme680: Remove redundant gas configuration Vasileios Amoiridis
2024-06-09 11:08 ` Jonathan Cameron
2024-06-06 21:23 ` [PATCH v2 18/19] iio: chemical: bme680: Move forced mode setup in ->read_raw() Vasileios Amoiridis
2024-06-06 21:23 ` [PATCH v2 19/19] iio: chemical: bme680: Refactorize reading functions Vasileios Amoiridis
2024-06-09 11:12 ` Jonathan Cameron
2024-06-09 23:02 ` Vasileios Amoiridis [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240609230250.GA316369@vamoiridPC \
--to=vassilisamir@gmail.com \
--cc=dpfrey@gmail.com \
--cc=himanshujha199640@gmail.com \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mike.looijmans@topic.nl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox