* [PULL] IIO: 1st set of new device support, features and cleanup for 6.14
@ 2025-01-11 13:21 Jonathan Cameron
2025-01-12 12:47 ` Greg KH
0 siblings, 1 reply; 2+ messages in thread
From: Jonathan Cameron @ 2025-01-11 13:21 UTC (permalink / raw)
To: gregkh, linux-iio
The following changes since commit cdd30ebb1b9f36159d66f088b61aee264e649d7a:
module: Convert symbol namespace to string literal (2024-12-02 11:34:44 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-6.14a
for you to fetch changes up to 577a66e2e634f712384c57a98f504c44ea4b47da:
iio: iio-mux: kzalloc instead of devm_kzalloc to ensure page alignment (2025-01-04 14:48:17 +0000)
----------------------------------------------------------------
IIO: 1st set of new device support, features and cleanup for 6.14
Fairly quiet cycle. Usual mix of new drivers, device support in
existing drivers, features and more general rework and cleanup.
There are a few late breaking or long standing but complex fixes
in here as well.
There is one expected merge conflict due to an upstream fix touching
neighboring code in ti-ads1119. The trivial resolution is the right one with
the result ending up as:
struct {
s16 sample;
aligned_s64 timestamp;
} scan;
New device support
==================
adi,ad4000
- Add support for many Pulsar ADC devices: AD7685, AD7686, AD7687, AD7688,
AD7690, AD7691, AD7693, AD7942, AD7946, AD7980, AD7982, AD7983, AD7984,
AD7988-1 and AD7988-5 ADCs. Generally similar to the AD4000 series
but with lower sampling rates and no configuration registers.
Includes addition of timestamp channels.
adi,adis16480
- Add support for ADIS16486, ADIS16487 and ADIS16489 IMUs. Required a few tweaks
to existing driver and addition of tables.
kionix,kx022a
- Add support for KX134ACR-LBZ accelerometer that is similar to the
KX132ACR-LBZ but with a wider (+-64G) sensor range.
- Add support for KX134-1211 accelerometer that is similar to the
KX132-1211 but with a wider (+-16G) sensor range.
nxp,fxls8962af
- Add support for fxls8974cf and fxls8967af accelerometers, Both are
compatible with fxls8962af but with different device IDs which are used in
presence checks.
renesas,rzg2l
- Add support for Renesas RZ/GS3 SoC ADCs (various driver refactors
precede this to allow for chip differences).
rohm,bd79704
- New driver for this 6 channel DAC.
st,mpu6050
- Support he IAM20380 which is effectively a cut down IAM20608 IMU with only
a gyroscope (no accelerometer).
st,stm-timmer-trigger
- Add support for ADC trigger use case for the STM32MP25 SOC. Do not support
the counter functionality in this driver as that is handled by the
counter subsystem.
ti,opt4060
- New driver for this RGBW color sensor.
Driver drop
===========
rohm,bu20008
- Drop as decision was made to not mass produce this light sensor after
Matti had done all the work to get a driver upstream.
Features
========
adi,ad_sigma_delta library + ad7124
- Allow for GPIO to check interrupt status, enabling this device on
more platforms that don't obey prior (non general) assumptions on
how the interrupt chips work.
- Allow variation in reset sequence length allowing chip specific
optimizations rather than always using worst case.
adi,ad7124
- Add temperature channel support.
adi,ad7173
- Add support calibration modes for this family of ADCs.
adi,adxl345
- Binding update to allow specification of which interrupt line is
connected (or none).
- Support interrupts and FIFO based data capture.
bosch,bme680
- Add regulators support. Note this required a new binding doc rather than
use of trivial-devices
- Runtime PM support.
microchip,pac1921
- Add ACPI support including _DSM for shunt value and label.
renesas,rzg2l
- Enable runtime autosuspend.
- Add suspend and resume support.
tyhx,hx9023s
- Add loading of a firmware file used to set defaults for some
configuration registers.
vishay,veml6030
- Support triggered buffers allowing efficient data capture at
higher speeds.
- Add regmap cache to reduce access to device.
Cleanup and minor fixes
=======================
cross-tree
- Another batch of conversions to devm_regulator_get_enable_read_voltage()
helper and related conversions to full devm that this enables.
- Various patches using guard() to allow early returns and simpler
code flow.
- Various conversions from s64 timestamp __aligned(8) to aligned_s64 type.
Includes a few cleanups where this unsigned and it should have been
signed.
- Fix up some missing types for drive-open-drain in dt-binding docs.
core
- Add missing documentation for iio_dmaengine_buffer_setup_ext()
- Add check that all buffers passed to iio_read_channel_ext_info()
and iio_read_channel_label() are page sized and page aligned.
Done this way because the callbacks are almost always only used
to fill sysfs attributes. The check covers the tiny percentage
of cases where use is made of this data in a consumer driver.
- Mark scan_timestamp memory of struct iio_dev private ensuring no
drivers change the value which belongs to the IIO core.
documentation
- Various missing ABI docs added.
- ABI docs made to use Y consistently as the wildcard for channel
number.
- Combine duplicate in_currentY_raw entries in ABI docs.
iio-mux
- Fix alignment of buffers passed to iio_channel_read_ext_info().
adi,ad_sigma_delta library
- Respect keep_cs_asserted flag in read path.
- Close a race condition around irq enabling and disabling.
- Use explicit unsigned int in place of unsigned.
adi,ad6695
- Move dt-binding header under adc sub-directory and fix include path in dt
example.
adi,ad7124
- Check number of channels in DT doesn't exceed what the driver can handle.
- Check input specified in DT are possible.
- Improved error reporting during probe.
adi,ad7173
- Drop unused structure element.
adi,ad7293
- Ensure power is turned on before resetting.
adi,adxl345
- Some documentation simplification and parameter renames.
- Add a function than unifies handling of power up and power down.
- Add defines to have a complete set of registers defined.
- Add missing \n to end of error messages.
amlogic,meson_saradc
- Simplify handling of the REG11 register access.
awinic,aw96104
- Constify iio_info structure.
bosch,bmp085
- Add to dt-binding to indicate devices support SPI.
bosch,bmp280
- Use sizeof() to replace a somewhat magic 2.
- Rename sleep related variables so the unit is included and use
fsleep() to replace usleep_range() calls.
bosch,bno055
- Constify struct bin_attribute
capella,cm3232
- Reset device before checking hardware ID inline with suggested flow
from datasheet.
diolan,dln2
- Simplify zeroing of structure used to gather up data by just
clearing the whole thing before writing rather than trying to
clear out he padding after write.
freescale,vf610
- Use devm_ and dev_error_probe() to simplify code and allow dropping
of explicit remove() callback.
invensense,timestamp library
- Use a cast to remove possibility of integer overflow.
kionix,kx022a
- Increase reset delay a little.
maxim,max1363
- Use a buffer of sufficient size in iio_priv() rather than allocating
variable sized buffer at use time.
microchip,mcp4725
- Replace of_property_read_bool() with of_property_present() for
detecting presence of regulator which is obviously not a bool.
nxp,fxls8962af
- Add wakeup-source property to the dt binding to allow these sensors
to wake the system up from suspend.
- Enable finer grained build when not all bus types need to be supported.
renesas,rzg2l
- Use dev_err_probe(), improving handling of probe errors and simplifying
code.
- Convert to devm_ based cleanup.
- Remove unnecessary runtime PM complexity as clocks are managed through
PM domains.
- Switch pm_ptr() removing need for __maybe_unused markings.
- use read_poll_timeout() to replace open coded equivalent.
samsung, ssp_sensors
- Simplify code by always providing timestamp whether or not it
is enabled.
st,lsm6dsx
- Avoid need to include linux/i3c/master by using i3cdev_to_dev() to
get to the contained struct device.
st,stm32-timer-trigger
- Check for clk_enable() fails.
vishay,veml6030
- Use new gts-helper functions and fix the _scale attribute to take into
account changes in gain and integration time.
Various other typo fixes in variable names + documentation and help text.
A few whitespace cleanup patches.
----------------------------------------------------------------
Christophe JAILLET (1):
iio: proximity: aw96103: Constify struct iio_info
Cibil Pankiras (1):
iio: light: cm3232: Reset before reading HW ID
Claudiu Beznea (12):
iio: adc: rzg2l_adc: Convert dev_err() to dev_err_probe()
iio: adc: rzg2l_adc: Use devres helpers to request pre-deasserted reset controls
iio: adc: rzg2l_adc: Simplify the runtime PM code
iio: adc: rzg2l_adc: Switch to RUNTIME_PM_OPS() and pm_ptr()
iio: adc: rzg2l_adc: Use read_poll_timeout()
iio: adc: rzg2l_adc: Simplify the locking scheme in rzg2l_adc_read_raw()
iio: adc: rzg2l_adc: Enable runtime PM autosuspend support
iio: adc: rzg2l_adc: Prepare for the addition of RZ/G3S support
iio: adc: rzg2l_adc: Add support for channel 8
iio: adc: rzg2l_adc: Add suspend/resume support
dt-bindings: iio: adc: renesas,rzg2l-adc: Document RZ/G3S SoC
iio: adc: rzg2l_adc: Add support for Renesas RZ/G3S
Darius Berghe (3):
iio: imu: adis16480: add devices to adis16480 driver
iio: imu: adis16480: add devices to adis16480 - docs
dt-bindings: iio: adis16480: add devices to adis16480
David Lechner (17):
iio: adc: ad7173: remove unused field
iio: dac: ad5624r: fix struct name in doc comment
iio: dac: ad5686: fix struct name in doc comment
iio: dac: ad5686: use devm_regulator_get_enable_read_voltage()
iio: dac: ad8801: use devm_regulator_get_enable_read_voltage()
iio: dac ad8801: drop driver remove function
iio: dac: ltc2632: use devm_regulator_get_enable_read_voltage()
iio: dac ltc2632: drop driver remove function
iio: dac: ltc2688: use devm_regulator_get_enable_read_voltage()
iio: dac: max5821: use devm_regulator_get_enable_read_voltage()
iio: adc: ad4695: move dt-bindings header
dt-bindings: iio: adc: adi,ad4695: change include path
iio: buffer-dmaengine: document iio_dmaengine_buffer_setup_ext
iio: adc: ad_sigma_delta: add tab to align irq_line
iio: ABI: use Y consistently as channel number
iio: dac: ad7293: enable power before reset
iio: ABI: combine current input sections
Fabrice Gasnier (1):
iio: trigger: stm32-timer: add support for stm32mp25
Frank Li (2):
iio: adc: vf610_adc: use devm_* and dev_err_probe() to simple code
iio: adc: vf610_adc: limit i.MX6SX's channel number to 4
Guenter Roeck (1):
iio: imu: lsm6dsx: Use i3cdev_to_dev to get device pointer
Guillaume Ranquet (2):
iio: adc: ad7173: add calibration support
iio: adc: ad-sigma-delta: Document ABI for sigma delta adc
Haibo Chen (1):
iio: accel: fxls8962af: add fxls8974cf support
Han Xu (5):
dt-bindings: iio: accel: fxls8962af: add compatible string 'nxp,fxls8967af'
dt-bindings: iio: accel: fxls8962af: add compatible string 'nxp,fxls8974cf'
iio: accel: fxls8962af: add fxls8967af support
dt-bindings: iio: imu: mpu6050: Add invensense,iam20380 compatible string
iio: gyro: Add support for iam20380 sensor
Javier Carrasco (7):
iio: core: fix doc reference to iio_push_to_buffers_with_ts_unaligned
iio: light: veml6030: add support for triggered buffer
iio: ABI: document in_illuminance_hardwaregain
iio: light: veml3235: fix code style
iio: light: veml3235: extend regmap to add cache
iio: gts-helper: add helpers to ease searches of gain_sel and new_gain
iio: light: veml3235: fix scale to conform to ABI
Jiasheng Jiang (1):
iio: trigger: stm32-timer-trigger: Add check for clk_enable()
Jonathan Cameron (18):
iio: adc: ad7944: Fix sign and use aligned_s64 for timestamp.
io: adc: ina2xx-adc: Fix sign and use aligned_s64 for timestamp.
iio: temperature: tmp006: Use aligned_s64 instead of open coding alignment.
iio: resolver: ad2s1210: Use aligned_s64 instead of open coding alignment.
iio: proximity: Use aligned_s64 instead of open coding alignment.
iio: pressure: Use aligned_s64 instead of open coding alignment.
iio: magnetometer: Use aligned_s64 instead of open coding alignment.
iio: light: Use aligned_s64 instead of open coding alignment.
iio: imu: Use aligned_s64 instead of open coding alignment.
iio: humidity: Use aligned_s64 instead of open coding alignment.
iio: gyro: Use aligned_s64 instead of open coding alignment.
iio: chemical: Use aligned_s64 instead of open coding alignment.
iio: adc: Use aligned_s64 instead of open coding alignment.
iio: accel: bma220: Use aligned_s64 instead of open coding alignment.
iio: adc: ti-lmp92064: Switch timestamp type from int64_t __aligned(8) to aligned_s64
iio: chemical: scd4x: switch timestamp type from int64_t __aligned(8) to aligned_s64
iio: imu: inv_icm42600: switch timestamp type from int64_t __aligned(8) to aligned_s64
iio: adc: rockchip: correct alignment of timestamp
Karan Sanghavi (2):
iio: invensense: Prevent possible integer overflow while multiplication
iio: dac: Fix converters spelling typo.
Lothar Rubusch (9):
iio: accel: adxl345: refrase comment on probe
iio: accel: adxl345: rename variable data to st
iio: accel: adxl345: add function to switch measuring mode
dt-bindings: iio: accel: adxl345: make interrupts not a required property
dt-bindings: iio: accel: adxl345: add interrupt-names
iio: accel: adxl345: introduce interrupt handling
iio: accel: adxl345: initialize FIFO delay value for SPI
iio: accel: adxl345: add FIFO with watermark events
iio: accel: adxl345: complete the list of defines
Marcelo Schmitt (4):
dt-bindings: iio: adc: adi,ad4000: Add PulSAR
iio: adc: ad4000: Add timestamp channel
iio: adc: ad4000: Use device specific timing for SPI transfers
iio: adc: ad4000: Add support for PulSAR devices
Martin Blumenstingl (3):
iio: adc: meson: fix voltage reference selection field name typo
iio: adc: meson: use tabs instead of spaces for some REG11 bit fields
iio: adc: meson: simplify MESON_SAR_ADC_REG11 register access
Matteo Martelli (2):
iio: consumers: ensure read buffers for labels and ext_info are page aligned
iio: iio-mux: kzalloc instead of devm_kzalloc to ensure page alignment
Matti Vaittinen (16):
iio: accel: kx022a: Improve reset delay
iio: bu27034: simplify using guard(mutex)
iio: bm1390: simplify using guard(mutex)
iio: light: Drop BU27008 and BU27010
dt-bindings: iio: light: Drop BU27008 and BU27010
iio: accel: kx022a: Use cleanup.h helpers
iio: accel: kx022a: Support ICs with different G-ranges
dt-bindings: ROHM KX134ACR-LBZ
iio: kx022a: Support ROHM KX134ACR-LBZ
dt-bindings: iio: kx022a: Support KX134-1211
iio: accel: kx022a: Support KX134-1211
iio: kx022a: document new chip_info structure members
iio: dac: ad5624r: Drop docs of missing members
dt-bindings: Add ROHM BD79703
iio: dac: Support ROHM BD79703 DAC
MAINTAINERS: Add maintainer for ROHM BD79703
Per-Daniel Olsson (2):
dt-bindings: iio: light: Document TI OPT4060 RGBW sensor
iio: light: Add support for TI OPT4060 color sensor
Rob Herring (Arm) (1):
iio: dac: mcp4725: Use of_property_present() for non-boolean properties
Robert Budai (1):
iio: imu: adis: Remove documented not used elements
Sean Nyekjaer (2):
dt-bindings: iio: accel: fxls8962af: add wakeup-source property
iio: imu: st_lsm6dsx: don't always auto-enable I2C, I3C and SPI interface drivers
Thomas Weißschuh (1):
iio: imu: bno055: constify 'struct bin_attribute'
Uwe Kleine-König (12):
iio: adc: ad7124: Don't create more channels than the driver can handle
iio: adc: ad7124: Refuse invalid input specifiers
dt-bindings: iio: adc: adi,ad7{124,173,192,780}: Allow specifications of a gpio for irq line
iio: adc: ad_sigma_delta: Add support for reading irq status using a GPIO
iio: adc: ad_sigma_delta: Handle CS assertion as intended in ad_sd_read_reg_raw()
iio: adc: ad_sigma_delta: Fix a race condition
iio: adc: ad_sigma_delta: Store information about reset sequence length
iio: adc: ad_sigma_delta: Check for previous ready signals
iio: adc: ad7124: Add error reporting during probe
iio: adc: ad7124: Implement temperature measurement
iio: adc: ad_sigma_delta: Use `unsigned int` instead of plain `unsigned`
iio: adc: ad7625: Add ending newlines to error messages
Vasileios Amoiridis (13):
dt-bindings: iio: bosch,bme680: Move from trivial-devices and add supplies
iio: chemical: bme680: add regulators
iio: chemical: bme680: add power management
iio: pressure: bmp280: Use sizeof() for denominator
iio: pressure: bmp280: Make time vars intuitive and move to fsleep
dt-bindings: iio: pressure: bmp085: Add SPI interface
iio: adc: dln2-adc: zero full struct instead of just the padding
iio: adc: max1363: Use a small fixed size buffer to replace dynamic allocation
iio: common: ssp_sensors: drop conditional optimization for simplicity
iio: core: mark scan_timestamp as __private
dt-bindings: iio: imu: bmi160: add boolean type for drive-open-drain
dt-bindings: iio: imu: bmi270: add boolean type for drive-open-drain
dt-bindings: iio: imu: bmi323: add boolean type for drive-open-drain
Victor Duicu (1):
iio: adc: pac1921: Add ACPI support to Microchip pac1921
Yasin Lee (1):
iio: proximity: hx9023s: Added firmware file parsing functionality
Documentation/ABI/testing/sysfs-bus-iio | 77 +-
.../ABI/testing/sysfs-bus-iio-adc-ad-sigma-delta | 23 +
Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192 | 24 -
.../devicetree/bindings/iio/accel/adi,adxl345.yaml | 11 +-
.../bindings/iio/accel/kionix,kx022a.yaml | 11 +-
.../bindings/iio/accel/nxp,fxls8962af.yaml | 20 +-
.../devicetree/bindings/iio/adc/adi,ad4000.yaml | 75 +-
.../devicetree/bindings/iio/adc/adi,ad4695.yaml | 7 +-
.../devicetree/bindings/iio/adc/adi,ad7124.yaml | 13 +
.../devicetree/bindings/iio/adc/adi,ad7173.yaml | 12 +
.../devicetree/bindings/iio/adc/adi,ad7192.yaml | 15 +
.../devicetree/bindings/iio/adc/adi,ad7780.yaml | 11 +
.../bindings/iio/adc/renesas,rzg2l-adc.yaml | 37 +-
.../bindings/iio/chemical/bosch,bme680.yaml | 62 +
.../devicetree/bindings/iio/dac/rohm,bd79703.yaml | 62 +
.../devicetree/bindings/iio/imu/adi,adis16480.yaml | 42 +-
.../devicetree/bindings/iio/imu/bosch,bmi160.yaml | 1 +
.../devicetree/bindings/iio/imu/bosch,bmi270.yaml | 1 +
.../devicetree/bindings/iio/imu/bosch,bmi323.yaml | 1 +
.../bindings/iio/imu/invensense,mpu6050.yaml | 1 +
.../bindings/iio/light/rohm,bu27008.yaml | 49 -
.../bindings/iio/light/rohm,bu27010.yaml | 50 -
.../devicetree/bindings/iio/light/ti,opt4060.yaml | 51 +
.../devicetree/bindings/iio/pressure/bmp085.yaml | 29 +
.../devicetree/bindings/trivial-devices.yaml | 2 -
Documentation/iio/ad4695.rst | 2 +-
Documentation/iio/adis16480.rst | 3 +
Documentation/iio/index.rst | 1 +
Documentation/iio/opt4060.rst | 61 +
MAINTAINERS | 8 +-
drivers/iio/accel/adxl345.h | 81 +-
drivers/iio/accel/adxl345_core.c | 417 ++++-
drivers/iio/accel/adxl345_i2c.c | 2 +-
drivers/iio/accel/adxl345_spi.c | 7 +-
drivers/iio/accel/bma220_spi.c | 2 +-
drivers/iio/accel/fxls8962af-core.c | 14 +
drivers/iio/accel/fxls8962af-i2c.c | 2 +
drivers/iio/accel/fxls8962af.h | 2 +
drivers/iio/accel/kionix-kx022a-i2c.c | 4 +
drivers/iio/accel/kionix-kx022a-spi.c | 4 +
drivers/iio/accel/kionix-kx022a.c | 169 +-
drivers/iio/accel/kionix-kx022a.h | 14 +
drivers/iio/adc/ad4000.c | 313 +++-
drivers/iio/adc/ad4695.c | 2 +-
drivers/iio/adc/ad7124.c | 217 ++-
drivers/iio/adc/ad7173.c | 119 +-
drivers/iio/adc/ad7192.c | 4 +-
drivers/iio/adc/ad7625.c | 8 +-
drivers/iio/adc/ad7791.c | 1 +
drivers/iio/adc/ad7793.c | 3 +-
drivers/iio/adc/ad7944.c | 2 +-
drivers/iio/adc/ad_sigma_delta.c | 194 ++-
drivers/iio/adc/dln2-adc.c | 21 +-
drivers/iio/adc/ina2xx-adc.c | 2 +-
drivers/iio/adc/max1118.c | 2 +-
drivers/iio/adc/max11410.c | 2 +-
drivers/iio/adc/max1363.c | 30 +-
drivers/iio/adc/mcp3911.c | 2 +-
drivers/iio/adc/meson_saradc.c | 47 +-
drivers/iio/adc/pac1921.c | 95 +-
drivers/iio/adc/rockchip_saradc.c | 2 +-
drivers/iio/adc/rtq6056.c | 2 +-
drivers/iio/adc/rzg2l_adc.c | 429 ++---
drivers/iio/adc/ti-adc081c.c | 2 +-
drivers/iio/adc/ti-adc084s021.c | 2 +-
drivers/iio/adc/ti-ads1015.c | 2 +-
drivers/iio/adc/ti-ads1119.c | 2 +-
drivers/iio/adc/ti-ads131e08.c | 2 +-
drivers/iio/adc/ti-lmp92064.c | 2 +-
drivers/iio/adc/ti-tsc2046.c | 2 +-
drivers/iio/adc/vf610_adc.c | 100 +-
drivers/iio/buffer/industrialio-buffer-dmaengine.c | 19 +-
drivers/iio/chemical/bme680.h | 2 +
drivers/iio/chemical/bme680_core.c | 120 +-
drivers/iio/chemical/bme680_i2c.c | 1 +
drivers/iio/chemical/bme680_spi.c | 1 +
drivers/iio/chemical/ccs811.c | 2 +-
drivers/iio/chemical/ens160_core.c | 2 +-
drivers/iio/chemical/scd30_core.c | 2 +-
drivers/iio/chemical/scd4x.c | 2 +-
.../iio/common/inv_sensors/inv_sensors_timestamp.c | 4 +-
drivers/iio/common/ssp_sensors/ssp_iio.c | 12 +-
drivers/iio/dac/Kconfig | 10 +-
drivers/iio/dac/Makefile | 1 +
drivers/iio/dac/ad5624r.h | 4 +-
drivers/iio/dac/ad5686-spi.c | 6 -
drivers/iio/dac/ad5686.c | 62 +-
drivers/iio/dac/ad5686.h | 6 +-
drivers/iio/dac/ad5696-i2c.c | 6 -
drivers/iio/dac/ad7293.c | 68 +-
drivers/iio/dac/ad8801.c | 81 +-
drivers/iio/dac/ltc2632.c | 69 +-
drivers/iio/dac/ltc2688.c | 44 +-
drivers/iio/dac/max5821.c | 36 +-
drivers/iio/dac/mcp4725.c | 2 +-
drivers/iio/dac/rohm-bd79703.c | 162 ++
drivers/iio/gyro/adxrs290.c | 2 +-
drivers/iio/gyro/bmg160_core.c | 2 +-
drivers/iio/gyro/itg3200_buffer.c | 2 +-
drivers/iio/gyro/mpu3050-core.c | 2 +-
drivers/iio/humidity/am2315.c | 2 +-
drivers/iio/humidity/hdc100x.c | 2 +-
drivers/iio/humidity/hts221.h | 2 +-
drivers/iio/imu/adis16480.c | 75 +
drivers/iio/imu/bmi323/bmi323_core.c | 2 +-
drivers/iio/imu/bno055/bno055.c | 10 +-
drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c | 2 +-
drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c | 2 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 25 +
drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 6 +
drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 2 +
drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c | 5 +
drivers/iio/imu/st_lsm6dsx/Kconfig | 18 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 6 +-
drivers/iio/industrialio-buffer.c | 2 +-
drivers/iio/industrialio-gts-helper.c | 77 +
drivers/iio/inkern.c | 11 +
drivers/iio/light/Kconfig | 32 +-
drivers/iio/light/Makefile | 2 +-
drivers/iio/light/adjd_s311.c | 2 +-
drivers/iio/light/as73211.c | 2 +-
drivers/iio/light/bh1745.c | 2 +-
drivers/iio/light/cm3232.c | 18 +-
drivers/iio/light/isl29125.c | 2 +-
drivers/iio/light/ltr501.c | 2 +-
drivers/iio/light/max44000.c | 2 +-
drivers/iio/light/opt4060.c | 1343 ++++++++++++++++
drivers/iio/light/rohm-bu27008.c | 1635 --------------------
drivers/iio/light/rohm-bu27034.c | 75 +-
drivers/iio/light/rpr0521.c | 2 +-
drivers/iio/light/st_uvis25.h | 2 +-
drivers/iio/light/tcs3414.c | 2 +-
drivers/iio/light/tcs3472.c | 2 +-
drivers/iio/light/veml3235.c | 274 ++--
drivers/iio/light/veml6030.c | 76 +
drivers/iio/magnetometer/af8133j.c | 2 +-
drivers/iio/magnetometer/ak8974.c | 2 +-
drivers/iio/magnetometer/ak8975.c | 2 +-
drivers/iio/magnetometer/bmc150_magn.c | 2 +-
drivers/iio/magnetometer/hmc5843.h | 2 +-
drivers/iio/magnetometer/mag3110.c | 2 +-
drivers/iio/magnetometer/yamaha-yas530.c | 2 +-
drivers/iio/multiplexer/iio-mux.c | 84 +-
drivers/iio/pressure/bmp280-core.c | 39 +-
drivers/iio/pressure/bmp280.h | 8 +-
drivers/iio/pressure/hsc030pa.h | 2 +-
drivers/iio/pressure/ms5611_core.c | 2 +-
drivers/iio/pressure/rohm-bm1390.c | 80 +-
drivers/iio/proximity/as3935.c | 2 +-
drivers/iio/proximity/aw96103.c | 2 +-
drivers/iio/proximity/hx9023s.c | 95 +-
drivers/iio/proximity/mb1232.c | 2 +-
drivers/iio/proximity/pulsedlight-lidar-lite-v2.c | 2 +-
drivers/iio/proximity/srf08.c | 2 +-
drivers/iio/proximity/sx_common.h | 2 +-
drivers/iio/resolver/ad2s1210.c | 2 +-
drivers/iio/temperature/tmp006.c | 2 +-
drivers/iio/trigger/stm32-timer-trigger.c | 69 +-
include/dt-bindings/iio/{ => adc}/adi,ad4695.h | 0
include/linux/iio/adc/ad_sigma_delta.h | 10 +-
include/linux/iio/buffer.h | 2 +-
include/linux/iio/consumer.h | 4 +-
include/linux/iio/iio-gts-helper.h | 6 +
include/linux/iio/iio-opaque.h | 2 +-
include/linux/iio/iio.h | 2 +-
include/linux/iio/imu/adis.h | 1 -
include/linux/iio/timer/stm32-timer-trigger.h | 6 +
167 files changed, 4813 insertions(+), 3176 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-ad-sigma-delta
create mode 100644 Documentation/devicetree/bindings/iio/chemical/bosch,bme680.yaml
create mode 100644 Documentation/devicetree/bindings/iio/dac/rohm,bd79703.yaml
delete mode 100644 Documentation/devicetree/bindings/iio/light/rohm,bu27008.yaml
delete mode 100644 Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml
create mode 100644 Documentation/devicetree/bindings/iio/light/ti,opt4060.yaml
create mode 100644 Documentation/iio/opt4060.rst
create mode 100644 drivers/iio/dac/rohm-bd79703.c
create mode 100644 drivers/iio/light/opt4060.c
delete mode 100644 drivers/iio/light/rohm-bu27008.c
rename include/dt-bindings/iio/{ => adc}/adi,ad4695.h (100%)
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PULL] IIO: 1st set of new device support, features and cleanup for 6.14
2025-01-11 13:21 [PULL] IIO: 1st set of new device support, features and cleanup for 6.14 Jonathan Cameron
@ 2025-01-12 12:47 ` Greg KH
0 siblings, 0 replies; 2+ messages in thread
From: Greg KH @ 2025-01-12 12:47 UTC (permalink / raw)
To: Jonathan Cameron; +Cc: linux-iio
On Sat, Jan 11, 2025 at 01:21:10PM +0000, Jonathan Cameron wrote:
> The following changes since commit cdd30ebb1b9f36159d66f088b61aee264e649d7a:
>
> module: Convert symbol namespace to string literal (2024-12-02 11:34:44 -0800)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-6.14a
Pulled and pushed out.
> for you to fetch changes up to 577a66e2e634f712384c57a98f504c44ea4b47da:
>
> iio: iio-mux: kzalloc instead of devm_kzalloc to ensure page alignment (2025-01-04 14:48:17 +0000)
>
> ----------------------------------------------------------------
> IIO: 1st set of new device support, features and cleanup for 6.14
>
> Fairly quiet cycle. Usual mix of new drivers, device support in
> existing drivers, features and more general rework and cleanup.
> There are a few late breaking or long standing but complex fixes
> in here as well.
>
> There is one expected merge conflict due to an upstream fix touching
> neighboring code in ti-ads1119. The trivial resolution is the right one with
> the result ending up as:
>
> struct {
> s16 sample;
> aligned_s64 timestamp;
> } scan;
I'll save this for later if it comes up, it didn't when I pulled this.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2025-01-12 12:49 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-01-11 13:21 [PULL] IIO: 1st set of new device support, features and cleanup for 6.14 Jonathan Cameron
2025-01-12 12:47 ` Greg KH
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox