Linux IIO development
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Lothar Rubusch <l.rubusch@gmail.com>
Cc: lars@metafoo.de, Michael.Hennerich@analog.com,
	linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
	eraretuya@gmail.com
Subject: Re: [PATCH v2 03/14] iio: accel: adxl345: reorganize irq handler
Date: Sun, 16 Feb 2025 17:05:41 +0000	[thread overview]
Message-ID: <20250216170541.3042a8f5@jic23-huawei> (raw)
In-Reply-To: <20250210110119.260858-4-l.rubusch@gmail.com>

On Mon, 10 Feb 2025 11:01:08 +0000
Lothar Rubusch <l.rubusch@gmail.com> wrote:

> Reorganize the IRQ handler. Move the overrun handling to the bottom.
> Overrun leads to reset the interrupt register. This also happens at
> evaluation of a particular interrupt event. First evaluate an event
> if possible, then fall back to overrun handling. Additionally simplify
> fetching the interrupt status function.
> 
> Both is in preparation to build interrupt handling up for the handling
> of different detected events, implemented in follow up patches.
> 
> Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Hi Lothar,

Changes are fine, but I think we should reevaluate if the little
helper to get_status is actually useful any more.  Probably best
to just drop it as part of this patch.

Jonathan

> ---
>  drivers/iio/accel/adxl345.h      |  1 -
>  drivers/iio/accel/adxl345_core.c | 26 +++++++++-----------------
>  2 files changed, 9 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/iio/accel/adxl345.h b/drivers/iio/accel/adxl345.h
> index 517e494ba555..bc6d634bd85c 100644
> --- a/drivers/iio/accel/adxl345.h
> +++ b/drivers/iio/accel/adxl345.h
> @@ -43,7 +43,6 @@
>  #define ADXL345_REG_INT_ENABLE		0x2E
>  #define ADXL345_REG_INT_MAP		0x2F
>  #define ADXL345_REG_INT_SOURCE		0x30
> -#define ADXL345_REG_INT_SOURCE_MSK	0xFF
>  #define ADXL345_REG_DATA_FORMAT		0x31
>  #define ADXL345_REG_XYZ_BASE		0x32
>  #define ADXL345_REG_DATA_AXIS(index)				\
> diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c
> index 468d562de227..2928c1c0760f 100644
> --- a/drivers/iio/accel/adxl345_core.c
> +++ b/drivers/iio/accel/adxl345_core.c
> @@ -107,8 +107,7 @@ static int adxl345_set_interrupts(struct adxl345_state *st)
>  	 * interrupts to the INT1 pin, whereas bits set to 1 send their respective
>  	 * interrupts to the INT2 pin. The intio shall convert this accordingly.
>  	 */
> -	int_map = FIELD_GET(ADXL345_REG_INT_SOURCE_MSK,
> -			    st->intio ? st->int_map : ~st->int_map);
> +	int_map = st->intio ? st->int_map : ~st->int_map;
>  
>  	ret = regmap_write(st->regmap, ADXL345_REG_INT_MAP, int_map);
>  	if (ret)
> @@ -404,16 +403,9 @@ static const struct iio_buffer_setup_ops adxl345_buffer_ops = {
>  	.predisable = adxl345_buffer_predisable,
>  };
>  
> -static int adxl345_get_status(struct adxl345_state *st)
> +static int adxl345_get_status(struct adxl345_state *st, unsigned int *int_stat)
>  {
> -	int ret;
> -	unsigned int regval;
> -
> -	ret = regmap_read(st->regmap, ADXL345_REG_INT_SOURCE, &regval);
> -	if (ret < 0)
> -		return ret;
> -
> -	return FIELD_GET(ADXL345_REG_INT_SOURCE_MSK, regval);
> +	return regmap_read(st->regmap, ADXL345_REG_INT_SOURCE, int_stat);

After this cleanup/refactoring this function no longer has a reason to exist.
Just call regmap_read() directly inline.

>  }
>  
>  static int adxl345_fifo_push(struct iio_dev *indio_dev,
> @@ -449,14 +441,10 @@ static irqreturn_t adxl345_irq_handler(int irq, void *p)
>  	int int_stat;
>  	int samples;
>  
> -	int_stat = adxl345_get_status(st);
> -	if (int_stat <= 0)
> +	if (adxl345_get_status(st, &int_stat))

	if (regmap_read(st->regmap, ADXL345_REG_INT_SOURCE, &int_stat))

>  		return IRQ_NONE;
>  
> -	if (int_stat & ADXL345_INT_OVERRUN)
> -		goto err;
> -
> -	if (int_stat & ADXL345_INT_WATERMARK) {
> +	if (FIELD_GET(ADXL345_INT_WATERMARK, int_stat)) {
>  		samples = adxl345_get_samples(st);
>  		if (samples < 0)
>  			goto err;
> @@ -464,6 +452,10 @@ static irqreturn_t adxl345_irq_handler(int irq, void *p)
>  		if (adxl345_fifo_push(indio_dev, samples) < 0)
>  			goto err;
>  	}
> +
> +	if (FIELD_GET(ADXL345_INT_OVERRUN, int_stat))
> +		goto err;
> +
>  	return IRQ_HANDLED;
>  
>  err:


  reply	other threads:[~2025-02-16 17:05 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-10 11:01 [PATCH v2 00/14] iio: accel: adxl345: add interrupt based sensor events Lothar Rubusch
2025-02-10 11:01 ` [PATCH v2 01/14] iio: accel: adxl345: reorganize measurement enable Lothar Rubusch
2025-02-10 11:01 ` [PATCH v2 02/14] iio: accel: adxl345: add debug register access Lothar Rubusch
2025-02-10 11:01 ` [PATCH v2 03/14] iio: accel: adxl345: reorganize irq handler Lothar Rubusch
2025-02-16 17:05   ` Jonathan Cameron [this message]
2025-02-10 11:01 ` [PATCH v2 04/14] iio: accel: adxl345: refac set_interrupts and IRQ map Lothar Rubusch
2025-02-16 17:11   ` Jonathan Cameron
2025-02-10 11:01 ` [PATCH v2 05/14] iio: accel: adxl345: add single tap feature Lothar Rubusch
2025-02-16 17:20   ` Jonathan Cameron
2025-02-10 11:01 ` [PATCH v2 06/14] iio: accel: adxl345: add double " Lothar Rubusch
2025-02-16 17:23   ` Jonathan Cameron
2025-02-10 11:01 ` [PATCH v2 07/14] iio: accel: adxl345: add double tap suppress bit Lothar Rubusch
2025-02-16 17:28   ` Jonathan Cameron
2025-02-18 22:29     ` Lothar Rubusch
2025-02-20 17:47       ` Jonathan Cameron
2025-02-10 11:01 ` [PATCH v2 08/14] iio: accel: adxl345: add freefall feature Lothar Rubusch
2025-02-16 17:33   ` Jonathan Cameron
2025-02-10 11:01 ` [PATCH v2 09/14] iio: accel: adxl345: extend sample frequency adjustments Lothar Rubusch
2025-02-16 17:38   ` Jonathan Cameron
2025-02-10 11:01 ` [PATCH v2 10/14] iio: accel: adxl345: add g-range configuration Lothar Rubusch
2025-02-16 17:41   ` Jonathan Cameron
2025-02-10 11:01 ` [PATCH v2 11/14] iio: accel: adxl345: add activity event feature Lothar Rubusch
2025-02-16 17:43   ` Jonathan Cameron
2025-02-10 11:01 ` [PATCH v2 12/14] iio: accel: adxl345: add inactivity feature Lothar Rubusch
2025-02-16 17:47   ` Jonathan Cameron
2025-02-10 11:01 ` [PATCH v2 13/14] iio: accel: adxl345: add coupling detection for activity/inactivity Lothar Rubusch
2025-02-16 17:54   ` Jonathan Cameron
2025-02-10 11:01 ` [PATCH v2 14/14] docs: iio: add documentation for adxl345 driver Lothar Rubusch
2025-02-16 18:00   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250216170541.3042a8f5@jic23-huawei \
    --to=jic23@kernel.org \
    --cc=Michael.Hennerich@analog.com \
    --cc=eraretuya@gmail.com \
    --cc=l.rubusch@gmail.com \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox