From: Jonathan Cameron <jic23@kernel.org>
To: linux-iio@vger.kernel.org
Cc: "David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <noname.nuno@gmail.com>,
"Olivier Moysan" <olivier.moysan@foss.st.com>,
"Mike Looijmans" <mike.looijmans@topic.nl>,
"Phil Reid" <preid@electromag.com.au>,
"Marek Vasut" <marek.vasut+renesas@gmail.com>,
"Miquel Raynal" <miquel.raynal@bootlin.com>,
"Claudiu Beznea" <claudiu.beznea@tuxon.dev>,
"Uwe Kleine-König" <u.kleine-koenig@baylibre.com>,
"Alisa-Dariana Roman" <alisa.roman@analog.com>,
"Marek Vasut" <marex@denx.de>, "Frank Li" <Frank.Li@nxp.com>,
"Jonathan Cameron" <Jonathan.Cameron@huawei.com>
Subject: [PATCH 17/29] iio: adc: ad7793: Factor out core of ad7793_write_raw() to simplify error handling
Date: Mon, 17 Feb 2025 14:16:17 +0000 [thread overview]
Message-ID: <20250217141630.897334-18-jic23@kernel.org> (raw)
In-Reply-To: <20250217141630.897334-1-jic23@kernel.org>
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Factor out everything under the direct mode claim allowing direct returns
in error paths. Switch sense of matching in the loop and use a continue
to reduce code indent and improve readability.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
drivers/iio/adc/ad7793.c | 79 +++++++++++++++++++++-------------------
1 file changed, 42 insertions(+), 37 deletions(-)
diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c
index 1b50d9643a63..861a3e44e5ad 100644
--- a/drivers/iio/adc/ad7793.c
+++ b/drivers/iio/adc/ad7793.c
@@ -462,64 +462,69 @@ static int ad7793_read_raw(struct iio_dev *indio_dev,
return -EINVAL;
}
-static int ad7793_write_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int val,
- int val2,
- long mask)
+static int __ad7793_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
{
struct ad7793_state *st = iio_priv(indio_dev);
- int ret, i;
+ int i;
unsigned int tmp;
- ret = iio_device_claim_direct_mode(indio_dev);
- if (ret)
- return ret;
-
switch (mask) {
case IIO_CHAN_INFO_SCALE:
- ret = -EINVAL;
- for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++)
- if (val2 == st->scale_avail[i][1]) {
- ret = 0;
- tmp = st->conf;
- st->conf &= ~AD7793_CONF_GAIN(-1);
- st->conf |= AD7793_CONF_GAIN(i);
-
- if (tmp == st->conf)
- break;
-
- ad_sd_write_reg(&st->sd, AD7793_REG_CONF,
- sizeof(st->conf), st->conf);
- ad7793_calibrate_all(st);
- break;
- }
- break;
- case IIO_CHAN_INFO_SAMP_FREQ:
- if (!val) {
- ret = -EINVAL;
- break;
+ for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) {
+ if (val2 != st->scale_avail[i][1])
+ continue;
+
+ tmp = st->conf;
+ st->conf &= ~AD7793_CONF_GAIN(-1);
+ st->conf |= AD7793_CONF_GAIN(i);
+
+ if (tmp == st->conf)
+ return 0;
+
+ ad_sd_write_reg(&st->sd, AD7793_REG_CONF,
+ sizeof(st->conf), st->conf);
+ ad7793_calibrate_all(st);
+
+ return 0;
}
+ return -EINVAL;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ if (!val)
+ return -EINVAL;
for (i = 0; i < 16; i++)
if (val == st->chip_info->sample_freq_avail[i])
break;
- if (i == 16) {
- ret = -EINVAL;
- break;
- }
+ if (i == 16)
+ return -EINVAL;
st->mode &= ~AD7793_MODE_RATE(-1);
st->mode |= AD7793_MODE_RATE(i);
ad_sd_write_reg(&st->sd, AD7793_REG_MODE, sizeof(st->mode),
st->mode);
- break;
+ return 0;
default:
- ret = -EINVAL;
+ return -EINVAL;
}
+}
+
+static int ad7793_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ int ret;
+
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+
+ ret = __ad7793_write_raw(indio_dev, chan, val, val2, mask);
iio_device_release_direct_mode(indio_dev);
+
return ret;
}
--
2.48.1
next prev parent reply other threads:[~2025-02-17 14:18 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-17 14:16 [PATCH 00/29] IIO: ADCs: Sparse friendly claim of direct mode Jonathan Cameron
2025-02-17 14:16 ` [PATCH 01/29] iio: adc: vf610: Move claim of direct mode to caller of vf610_read_sample and use guard(mutex) Jonathan Cameron
2025-02-17 14:16 ` [PATCH 02/29] iio: adc: vf610: Switch to sparse friendly iio_device_claim/release_direct() Jonathan Cameron
2025-02-17 14:16 ` [PATCH 03/29] iio: adc: ti-ads1100: Use guard(mutex) to allow direct returns Jonathan Cameron
2025-02-17 14:16 ` [PATCH 04/29] iio: adc: ti-ads1100: Switch to sparse friendly iio_device_claim/release_direct() Jonathan Cameron
2025-02-17 14:16 ` [PATCH 05/29] iio: adc: ti-ads1015: Use guard(mutex) and factor out code for INFO_RAW Jonathan Cameron
2025-02-17 14:16 ` [PATCH 06/29] iio: adc: ti-ads1015: Switch to sparse friendly iio_device_claim/release_direct() Jonathan Cameron
2025-02-17 14:16 ` [PATCH 07/29] iio: adc: stm32-dfsdm: Factor out core of reading INFO_RAW Jonathan Cameron
2025-02-18 15:32 ` Olivier MOYSAN
2025-02-17 14:16 ` [PATCH 08/29] iio: adc: stm32-dfsdm: Switch to sparse friendly iio_device_claim/release_direct() Jonathan Cameron
2025-02-18 15:34 ` Olivier MOYSAN
2025-02-17 14:16 ` [PATCH 09/29] iio: adc: ad4030: " Jonathan Cameron
2025-02-19 10:54 ` Nuno Sá
2025-02-17 14:16 ` [PATCH 10/29] iio: adc: ad7192: Factor out core of ad7192_write_raw() to simplify error handling Jonathan Cameron
2025-02-19 10:54 ` Nuno Sá
2025-02-17 14:16 ` [PATCH 11/29] iio: adc: ad7192: Switch to sparse friendly iio_device_claim/release_direct() Jonathan Cameron
2025-02-19 10:55 ` Nuno Sá
2025-02-17 14:16 ` [PATCH 12/29] iio: adc: ad7768-1: Move setting of val a bit later to avoid unnecessary return value check Jonathan Cameron
2025-02-19 10:56 ` Nuno Sá
2025-02-17 14:16 ` [PATCH 13/29] iio: adc: ad7768-1: Switch to sparse friendly iio_device_claim/release_direct() Jonathan Cameron
2025-02-19 10:56 ` Nuno Sá
2025-02-17 14:16 ` [PATCH 14/29] iio: adc: ad7606: " Jonathan Cameron
2025-02-19 10:57 ` Nuno Sá
2025-02-17 14:16 ` [PATCH 15/29] iio: adc: ad7791: Factor out core of ad7791_write_raw() to simplify error handling Jonathan Cameron
2025-02-19 10:59 ` Nuno Sá
2025-02-17 14:16 ` [PATCH 16/29] iio: adc: ad7791: Switch to sparse friendly iio_device_claim/release_direct() Jonathan Cameron
2025-02-19 11:00 ` Nuno Sá
2025-02-17 14:16 ` Jonathan Cameron [this message]
2025-02-19 11:00 ` [PATCH 17/29] iio: adc: ad7793: Factor out core of ad7793_write_raw() to simplify error handling Nuno Sá
2025-02-17 14:16 ` [PATCH 18/29] iio: adc: ad7793: Switch to sparse friendly iio_device_claim/release_direct() Jonathan Cameron
2025-02-19 11:01 ` Nuno Sá
2025-02-17 14:16 ` [PATCH 19/29] iio: adc: ad799x: " Jonathan Cameron
2025-02-19 11:02 ` Nuno Sá
2025-02-17 14:16 ` [PATCH 20/29] iio: adc: ad_sigma_delta: " Jonathan Cameron
2025-02-19 11:03 ` Nuno Sá
2025-02-17 14:16 ` [PATCH 21/29] iio: adc: at91-sama5d2: Move claim of direct mode up a level and use guard() Jonathan Cameron
2025-02-19 12:45 ` Claudiu Beznea
2025-02-17 14:16 ` [PATCH 22/29] iio: adc: at91-sama5d2: Switch to sparse friendly iio_device_claim/release_direct() Jonathan Cameron
2025-02-19 12:46 ` Claudiu Beznea
2025-02-17 14:16 ` [PATCH 23/29] iio: adc: max1027: Move claim of direct mode up one level and use guard() Jonathan Cameron
2025-02-17 15:38 ` Miquel Raynal
2025-02-22 13:04 ` Jonathan Cameron
2025-02-17 14:16 ` [PATCH 24/29] iio: adc: max1027: Switch to sparse friendly iio_device_claim/release_direct() Jonathan Cameron
2025-02-17 15:40 ` Miquel Raynal
2025-02-22 13:06 ` Jonathan Cameron
2025-02-17 14:16 ` [PATCH 25/29] iio: adc: max11410: Factor out writing of sampling frequency to simplify errro paths Jonathan Cameron
2025-02-19 11:03 ` Nuno Sá
2025-02-17 14:16 ` [PATCH 26/29] iio: adc: max11410: Switch to sparse friendly iio_device_claim/release_direct() Jonathan Cameron
2025-02-19 11:04 ` Nuno Sá
2025-02-17 14:16 ` [PATCH 27/29] iio: adc: mxs-lradc: " Jonathan Cameron
2025-02-17 14:16 ` [PATCH 28/29] iio: adc: rcar: " Jonathan Cameron
2025-02-17 14:16 ` [PATCH 29/29] iio: adc: " Jonathan Cameron
2025-02-19 11:07 ` Nuno Sá
2025-02-20 12:47 ` Mike Looijmans
2025-02-22 13:09 ` [PATCH 00/29] IIO: ADCs: Sparse friendly claim of direct mode Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250217141630.897334-18-jic23@kernel.org \
--to=jic23@kernel.org \
--cc=Frank.Li@nxp.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=alisa.roman@analog.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=dlechner@baylibre.com \
--cc=linux-iio@vger.kernel.org \
--cc=marek.vasut+renesas@gmail.com \
--cc=marex@denx.de \
--cc=mike.looijmans@topic.nl \
--cc=miquel.raynal@bootlin.com \
--cc=noname.nuno@gmail.com \
--cc=olivier.moysan@foss.st.com \
--cc=preid@electromag.com.au \
--cc=u.kleine-koenig@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox