[PATCH 00/14] Add support for AD4080 ADC

[Antoniu Miclaus <antoniu.miclaus@analog.com>]

The AD4080 is a high-speed, low noise, low distortion, 20-bit, Easy
Drive, successive approximation register (SAR) analog-to-digital
converter (ADC). Maintaining high performance (signal-to-noise and
distortion (SINAD) ratio > 90 dBFS) at signal frequencies in excess
of 1 MHz enables the AD4080 to service a wide variety of precision,
wide bandwidth data acquisition applications. Simplification of the
input anti-alias filter design can be accomplished by applying over-
sampling along with the integrated digital filtering and decimation to
reduce noise and lower the output data rate for applications that do
not require the lowest latency of the AD4080.

Antoniu Miclaus (14):
  iio: backend: add support for filter config
  iio: backend: add support for sync process
  iio: backend: add support for self sync
  iio: backend: add support for sync status
  iio: backend: add support for number of lanes
  dt-bindings: iio: adc: add ad408x axi variant
  iio: adc: adi-axi-adc: add filter enable/disable
  iio: adc: adi-axi-adc: add bitslip enable/disable
  iio: adc: adi-axi-adc: add self sync support
  iio: adc: adi-axi-adc: add sync status
  iio: adc: adi-axi-adc: add num lanes support
  dt-bindings: iio: adc: add ad4080
  iio: adc: ad4080: add driver support
  Documentation: ABI: testing: ad4080 docs

 .../ABI/testing/sysfs-bus-iio-adc-ad4080      |  55 ++
 .../bindings/iio/adc/adi,ad4080.yaml          |  92 +++
 .../bindings/iio/adc/adi,axi-adc.yaml         |   2 +
 drivers/iio/adc/Kconfig                       |  15 +
 drivers/iio/adc/Makefile                      |   1 +
 drivers/iio/adc/ad4080.c                      | 768 ++++++++++++++++++
 drivers/iio/adc/adi-axi-adc.c                 | 115 +++
 drivers/iio/industrialio-backend.c            | 113 +++
 include/linux/iio/backend.h                   |  24 +
 9 files changed, 1185 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-ad4080
 create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml
 create mode 100644 drivers/iio/adc/ad4080.c

-- 
2.48.1