Linux IIO development
 help / color / mirror / Atom feed
From: Antoniu Miclaus <antoniu.miclaus@analog.com>
To: <jic23@kernel.org>, <robh@kernel.org>, <conor+dt@kernel.org>,
	<linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Cc: Antoniu Miclaus <antoniu.miclaus@analog.com>
Subject: [PATCH 12/14] dt-bindings: iio: adc: add ad4080
Date: Thu, 20 Feb 2025 15:54:22 +0200	[thread overview]
Message-ID: <20250220135429.8615-13-antoniu.miclaus@analog.com> (raw)
In-Reply-To: <20250220135429.8615-1-antoniu.miclaus@analog.com>

Add devicetree bindings for ad4080 family.

Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
---
 .../bindings/iio/adc/adi,ad4080.yaml          | 92 +++++++++++++++++++
 1 file changed, 92 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml
new file mode 100644
index 000000000000..e0ea712b8457
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2025 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4080.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD4080 20-Bit, 40 MSPS, Differential SAR ADC
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+  The AD4080 is a high speed, low noise, low distortion, 20-bit, Easy Drive,
+  successive approximation register (SAR) analog-to-digital converter (ADC).
+  Maintaining high performance (signal-to-noise and distortion (SINAD) ratio
+  > 90 dBFS) at signal frequencies in excess of 1 MHz enables the AD4080 to
+  service a wide variety of precision, wide bandwidth data acquisition
+  applications.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad4080.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,ad4080
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 50000000
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: adc-clk
+
+  vdd33-supply: true
+
+  vdd11-supply: true
+
+  vddldo-supply: true
+
+  iovdd-supply: true
+
+  vrefin-supply: true
+
+  adi,num-lanes:
+    description:
+      Nmber of lanes on which the data is sent on the output (DA, DB pins).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+    default: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vdd33-supply
+  - vdd11-supply
+  - vddldo-supply
+  - iovdd-supply
+  - vrefin-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+          compatible = "adi,ad4080";
+          reg = <0>;
+          spi-max-frequency = <10000000>;
+          vdd33-supply = <&vdd33>;
+          vdd11-supply = <&vdd11>;
+          vddldo-supply = <&vddldo>;
+          iovdd-supply = <&iovdd>;
+          vrefin-supply = <&vrefin>;
+          clocks = <&adc_clk>;
+          clock-names = "adc-clk";
+        };
+    };
+...
-- 
2.48.1


  parent reply	other threads:[~2025-02-20 13:56 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-20 13:54 [PATCH 00/14] Add support for AD4080 ADC Antoniu Miclaus
2025-02-20 13:54 ` [PATCH 01/14] iio: backend: add support for filter config Antoniu Miclaus
2025-02-22 16:47   ` Jonathan Cameron
2025-02-20 13:54 ` [PATCH 02/14] iio: backend: add support for sync process Antoniu Miclaus
2025-02-22 16:49   ` Jonathan Cameron
2025-02-20 13:54 ` [PATCH 03/14] iio: backend: add support for self sync Antoniu Miclaus
2025-02-20 13:54 ` [PATCH 04/14] iio: backend: add support for sync status Antoniu Miclaus
2025-02-20 13:54 ` [PATCH 05/14] iio: backend: add support for number of lanes Antoniu Miclaus
2025-02-20 20:20   ` David Lechner
2025-02-21 15:59     ` Nuno Sá
2025-02-20 13:54 ` [PATCH 06/14] dt-bindings: iio: adc: add ad408x axi variant Antoniu Miclaus
2025-02-21 17:49   ` Conor Dooley
2025-02-20 13:54 ` [PATCH 07/14] iio: adc: adi-axi-adc: add filter enable/disable Antoniu Miclaus
2025-02-20 13:54 ` [PATCH 08/14] iio: adc: adi-axi-adc: add bitslip enable/disable Antoniu Miclaus
2025-02-20 13:54 ` [PATCH 09/14] iio: adc: adi-axi-adc: add self sync support Antoniu Miclaus
2025-02-20 13:54 ` [PATCH 10/14] iio: adc: adi-axi-adc: add sync status Antoniu Miclaus
2025-02-20 13:54 ` [PATCH 11/14] iio: adc: adi-axi-adc: add num lanes support Antoniu Miclaus
2025-02-20 13:54 ` Antoniu Miclaus [this message]
2025-02-20 19:30   ` [PATCH 12/14] dt-bindings: iio: adc: add ad4080 David Lechner
2025-02-21 17:51     ` Conor Dooley
2025-02-20 13:54 ` [PATCH 13/14] iio: adc: ad4080: add driver support Antoniu Miclaus
2025-02-20 15:21   ` Nuno Sá
2025-02-22 17:12   ` Jonathan Cameron
2025-02-20 13:54 ` [PATCH 14/14] Documentation: ABI: testing: ad4080 docs Antoniu Miclaus
2025-02-20 14:53   ` Nuno Sá
2025-02-20 18:27     ` David Lechner
2025-02-25  9:16       ` Nuno Sá
2025-02-25 15:26         ` David Lechner
2025-03-05 13:00           ` Jonathan Cameron
2025-02-20 20:12 ` [PATCH 00/14] Add support for AD4080 ADC David Lechner
2025-02-22 16:56   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250220135429.8615-13-antoniu.miclaus@analog.com \
    --to=antoniu.miclaus@analog.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox