[PATCH v2 1/6] iio: adc: ad4080: fix chip identification

[Antoniu Miclaus <antoniu.miclaus@analog.com>]

Fix AD4080 chip identification by using the correct 16-bit product ID
(0x0050) instead of GENMASK(2, 0). Update the chip reading logic to
use regmap_bulk_read to read both PRODUCT_ID_L and PRODUCT_ID_H
registers and combine them into a 16-bit value.

The original implementation was incorrectly reading only 3 bits,
which would not correctly identify the AD4080 chip.

Fixes: 6b31ba1811b6 ("iio: adc: ad4080: add driver support")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
---
changes in v2:
 - add the chip id handling into a separate commit.
 - use regmap_bulk_read.
 drivers/iio/adc/ad4080.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/adc/ad4080.c b/drivers/iio/adc/ad4080.c
index 6e61787ed321..b80560aebe2d 100644
--- a/drivers/iio/adc/ad4080.c
+++ b/drivers/iio/adc/ad4080.c
@@ -125,7 +125,7 @@
 
 /* Miscellaneous Definitions */
 #define AD4080_SPI_READ						BIT(7)
-#define AD4080_CHIP_ID						GENMASK(2, 0)
+#define AD4080_CHIP_ID						0x0050
 
 #define AD4080_LVDS_CNV_CLK_CNT_MAX				7
 
@@ -458,10 +458,11 @@ static int ad4080_setup(struct iio_dev *indio_dev)
 	if (ret)
 		return ret;
 
-	ret = regmap_read(st->regmap, AD4080_REG_CHIP_TYPE, &id);
+	ret = regmap_bulk_read(st->regmap, AD4080_REG_PRODUCT_ID_L, &id, 2);
 	if (ret)
 		return ret;
 
+	id = get_unaligned_le16(&id);
 	if (id != AD4080_CHIP_ID)
 		dev_info(dev, "Unrecognized CHIP_ID 0x%X\n", id);
 
-- 
2.43.0