From: Francesco Lavra <flavra@baylibre.com>
To: "Lorenzo Bianconi" <lorenzo@kernel.org>,
"Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Andy Shevchenko <andriy.shevchenko@intel.com>
Subject: [PATCH v4 8/9] iio: imu: st_lsm6dsx: add event spec parameter to iio_chan_spec initializer
Date: Mon, 1 Dec 2025 11:00:17 +0100 [thread overview]
Message-ID: <20251201100018.426749-9-flavra@baylibre.com> (raw)
In-Reply-To: <20251201100018.426749-1-flavra@baylibre.com>
In preparation for adding support for more event sources, add to the
ST_LSM6DSX_CHANNEL_ACC() iio_chan_spec initializer macro an iio_event_spec
array argument, so that this macro can be used with different arrays by
sensors that support different event sources; change the st_lsm6dsx_event
struct declaration to an array (renamed as st_lsm6dsx_ev_motion) so that it
can be passed to the macro (and opportunistically move it from the header
file where it does not belong to the C file where it is used).
In addition, remove from this macro the channel type parameter and
hard-code IIO_ACCEL in the macro definition, since all callers use
IIO_ACCEL as channel type argument.
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
---
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 15 ++++-----------
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 15 ++++++++++++---
2 files changed, 16 insertions(+), 14 deletions(-)
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index 515aadbee3a4..3edff8456a8f 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -81,9 +81,9 @@ enum st_lsm6dsx_hw_id {
#define ST_LSM6DSX_SHIFT_VAL(val, mask) (((val) << __ffs(mask)) & (mask))
#define st_lsm6dsx_field_get(mask, reg) ((reg & mask) >> __ffs(mask))
-#define ST_LSM6DSX_CHANNEL_ACC(chan_type, addr, mod, scan_idx) \
+#define ST_LSM6DSX_CHANNEL_ACC(addr, mod, scan_idx, events) \
{ \
- .type = chan_type, \
+ .type = IIO_ACCEL, \
.address = addr, \
.modified = 1, \
.channel2 = mod, \
@@ -97,9 +97,9 @@ enum st_lsm6dsx_hw_id {
.storagebits = 16, \
.endianness = IIO_LE, \
}, \
- .event_spec = &st_lsm6dsx_event, \
+ .event_spec = events, \
+ .num_event_specs = ARRAY_SIZE(events), \
.ext_info = st_lsm6dsx_ext_info, \
- .num_event_specs = 1, \
}
#define ST_LSM6DSX_CHANNEL(chan_type, addr, mod, scan_idx) \
@@ -468,13 +468,6 @@ struct st_lsm6dsx_hw {
} scan[ST_LSM6DSX_ID_MAX];
};
-static __maybe_unused const struct iio_event_spec st_lsm6dsx_event = {
- .type = IIO_EV_TYPE_THRESH,
- .dir = IIO_EV_DIR_EITHER,
- .mask_separate = BIT(IIO_EV_INFO_VALUE) |
- BIT(IIO_EV_INFO_ENABLE)
-};
-
static __maybe_unused const unsigned long st_lsm6dsx_available_scan_masks[] = {
0x7, 0x0,
};
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index e6c769049981..04a3c65d4546 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -96,10 +96,19 @@
#define ST_LSM6DSX_TS_SENSITIVITY 25000UL /* 25us */
+static const struct iio_event_spec st_lsm6dsx_ev_motion[] = {
+ {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_EITHER,
+ .mask_separate = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_ENABLE),
+ },
+};
+
static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {
- ST_LSM6DSX_CHANNEL_ACC(IIO_ACCEL, 0x28, IIO_MOD_X, 0),
- ST_LSM6DSX_CHANNEL_ACC(IIO_ACCEL, 0x2a, IIO_MOD_Y, 1),
- ST_LSM6DSX_CHANNEL_ACC(IIO_ACCEL, 0x2c, IIO_MOD_Z, 2),
+ ST_LSM6DSX_CHANNEL_ACC(0x28, IIO_MOD_X, 0, st_lsm6dsx_ev_motion),
+ ST_LSM6DSX_CHANNEL_ACC(0x2a, IIO_MOD_Y, 1, st_lsm6dsx_ev_motion),
+ ST_LSM6DSX_CHANNEL_ACC(0x2c, IIO_MOD_Z, 2, st_lsm6dsx_ev_motion),
IIO_CHAN_SOFT_TIMESTAMP(3),
};
--
2.39.5
next prev parent reply other threads:[~2025-12-01 10:00 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-01 10:00 [PATCH v4 0/9] st_lsm6dsx: add tap event detection Francesco Lavra
2025-12-01 10:00 ` [PATCH v4 1/9] iio: imu: st_lsm6dsx: fix iio_chan_spec for sensors without " Francesco Lavra
2025-12-07 15:15 ` Jonathan Cameron
2025-12-01 10:00 ` [PATCH v4 2/9] iio: imu: st_lsm6dsx: make event_settings more generic Francesco Lavra
2025-12-07 15:21 ` Jonathan Cameron
2025-12-01 10:00 ` [PATCH v4 3/9] iio: imu: st_lsm6dsx: move wakeup event enable mask to event_src Francesco Lavra
2025-12-07 15:22 ` Jonathan Cameron
2025-12-01 10:00 ` [PATCH v4 4/9] iio: imu: st_lsm6dsx: rework code to check for enabled events Francesco Lavra
2025-12-07 15:27 ` Jonathan Cameron
2025-12-01 10:00 ` [PATCH v4 5/9] iio: imu: st_lsm6dsx: remove event_threshold field from hw struct Francesco Lavra
2025-12-07 15:31 ` Jonathan Cameron
2025-12-07 22:50 ` Andy Shevchenko
2025-12-01 10:00 ` [PATCH v4 6/9] iio: imu: st_lsm6dsx: make event management functions generic Francesco Lavra
2025-12-07 15:33 ` Jonathan Cameron
2025-12-01 10:00 ` [PATCH v4 7/9] iio: imu: st_lsm6dsx: add event configurability on a per axis basis Francesco Lavra
2025-12-07 15:35 ` Jonathan Cameron
2025-12-01 10:00 ` Francesco Lavra [this message]
2025-12-07 15:36 ` [PATCH v4 8/9] iio: imu: st_lsm6dsx: add event spec parameter to iio_chan_spec initializer Jonathan Cameron
2025-12-01 10:00 ` [PATCH v4 9/9] iio: imu: st_lsm6dsx: add tap event detection Francesco Lavra
2025-12-07 15:40 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251201100018.426749-9-flavra@baylibre.com \
--to=flavra@baylibre.com \
--cc=andriy.shevchenko@intel.com \
--cc=andy@kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lorenzo@kernel.org \
--cc=nuno.sa@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox