Linux IIO development
 help / color / mirror / Atom feed
From: Sanjay Chitroda <sanjayembeddedse@gmail.com>
To: jikos@kernel.org, jic23@kernel.org, srinivas.pandruvada@linux.intel.com
Cc: dlechner@baylibre.com, nuno.sa@analog.com, andy@kernel.org,
	sanjayembeddedse@gmail.com, sakari.ailus@linux.intel.com,
	linux-input@vger.kernel.org, linux-iio@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v3 6/9] iio: humidity: hid-sensor-humidity: cleanup codestyle check
Date: Sat,  9 May 2026 15:40:37 +0530	[thread overview]
Message-ID: <20260509101040.791404-7-sanjayembedded@gmail.com> (raw)
In-Reply-To: <20260509101040.791404-1-sanjayembedded@gmail.com>

From: Sanjay Chitroda <sanjayembeddedse@gmail.com>

Reported by checkpatch:
FILE: drivers/iio/humidity/hid-sensor-humidity.c

CHECK: Alignment should match open parenthesis

Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
---
 drivers/iio/humidity/hid-sensor-humidity.c | 46 +++++++++++-----------
 1 file changed, 23 insertions(+), 23 deletions(-)

diff --git a/drivers/iio/humidity/hid-sensor-humidity.c b/drivers/iio/humidity/hid-sensor-humidity.c
index e580a2af9562..968dd8d4bb35 100644
--- a/drivers/iio/humidity/hid-sensor-humidity.c
+++ b/drivers/iio/humidity/hid-sensor-humidity.c
@@ -45,7 +45,7 @@ static const struct iio_chan_spec humidity_channels[] = {
 
 /* Adjust channel real bits based on report descriptor */
 static void humidity_adjust_channel_bit_mask(struct iio_chan_spec *channels,
-					int channel, int size)
+					     int channel, int size)
 {
 	channels[channel].scan_type.sign = 's';
 	/* Real storage bits will change based on the report desc. */
@@ -55,8 +55,8 @@ static void humidity_adjust_channel_bit_mask(struct iio_chan_spec *channels,
 }
 
 static int humidity_read_raw(struct iio_dev *indio_dev,
-				struct iio_chan_spec const *chan,
-				int *val, int *val2, long mask)
+			     struct iio_chan_spec const *chan,
+			     int *val, int *val2, long mask)
 {
 	struct hid_humidity_state *humid_st = iio_priv(indio_dev);
 
@@ -101,8 +101,8 @@ static int humidity_read_raw(struct iio_dev *indio_dev,
 }
 
 static int humidity_write_raw(struct iio_dev *indio_dev,
-				struct iio_chan_spec const *chan,
-				int val, int val2, long mask)
+			      struct iio_chan_spec const *chan,
+			      int val, int val2, long mask)
 {
 	struct hid_humidity_state *humid_st = iio_priv(indio_dev);
 
@@ -127,7 +127,7 @@ static const struct iio_info humidity_info = {
 
 /* Callback handler to send event after all samples are received and captured */
 static int humidity_proc_event(struct hid_sensor_hub_device *hsdev,
-				unsigned int usage_id, void *pdev)
+			       unsigned int usage_id, void *pdev)
 {
 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
 	struct hid_humidity_state *humid_st = iio_priv(indio_dev);
@@ -141,8 +141,8 @@ static int humidity_proc_event(struct hid_sensor_hub_device *hsdev,
 
 /* Capture samples in local storage */
 static int humidity_capture_sample(struct hid_sensor_hub_device *hsdev,
-				unsigned int usage_id, size_t raw_len,
-				char *raw_data, void *pdev)
+				   unsigned int usage_id, size_t raw_len,
+				   char *raw_data, void *pdev)
 {
 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
 	struct hid_humidity_state *humid_st = iio_priv(indio_dev);
@@ -159,17 +159,17 @@ static int humidity_capture_sample(struct hid_sensor_hub_device *hsdev,
 
 /* Parse report which is specific to an usage id */
 static int humidity_parse_report(struct platform_device *pdev,
-				struct hid_sensor_hub_device *hsdev,
-				struct iio_chan_spec *channels,
-				unsigned int usage_id,
-				struct hid_humidity_state *st)
+				 struct hid_sensor_hub_device *hsdev,
+				 struct iio_chan_spec *channels,
+				 unsigned int usage_id,
+				 struct hid_humidity_state *st)
 {
 	int ret;
 
 	ret = sensor_hub_input_get_attribute_info(hsdev, HID_INPUT_REPORT,
-					usage_id,
-					HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY,
-					&st->humidity_attr);
+						  usage_id,
+						  HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY,
+						  &st->humidity_attr);
 	if (ret < 0)
 		return ret;
 
@@ -208,20 +208,20 @@ static int hid_humidity_probe(struct platform_device *pdev)
 	humid_st->common_attributes.pdev = pdev;
 
 	ret = hid_sensor_parse_common_attributes(hsdev,
-					HID_USAGE_SENSOR_HUMIDITY,
-					&humid_st->common_attributes,
-					humidity_sensitivity_addresses,
-					ARRAY_SIZE(humidity_sensitivity_addresses));
+						 HID_USAGE_SENSOR_HUMIDITY,
+						 &humid_st->common_attributes,
+						 humidity_sensitivity_addresses,
+						 ARRAY_SIZE(humidity_sensitivity_addresses));
 	if (ret)
 		return ret;
 
 	humid_chans = devm_kmemdup(&indio_dev->dev, humidity_channels,
-					sizeof(humidity_channels), GFP_KERNEL);
+				   sizeof(humidity_channels), GFP_KERNEL);
 	if (!humid_chans)
 		return -ENOMEM;
 
 	ret = humidity_parse_report(pdev, hsdev, humid_chans,
-				HID_USAGE_SENSOR_HUMIDITY, humid_st);
+				    HID_USAGE_SENSOR_HUMIDITY, humid_st);
 	if (ret)
 		return ret;
 
@@ -234,7 +234,7 @@ static int hid_humidity_probe(struct platform_device *pdev)
 	atomic_set(&humid_st->common_attributes.data_ready, 0);
 
 	ret = hid_sensor_setup_trigger(indio_dev, name,
-				&humid_st->common_attributes);
+				       &humid_st->common_attributes);
 	if (ret)
 		return ret;
 
@@ -242,7 +242,7 @@ static int hid_humidity_probe(struct platform_device *pdev)
 
 	humidity_callbacks.pdev = pdev;
 	ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_HUMIDITY,
-					&humidity_callbacks);
+					   &humidity_callbacks);
 	if (ret)
 		goto error_remove_trigger;
 
-- 
2.34.1


  parent reply	other threads:[~2026-05-09 10:11 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-09 10:10 [PATCH v3 0/9] iio: introduce devm_ API for hid sensro setup and cleanup Sanjay Chitroda
2026-05-09 10:10 ` [PATCH v3 1/9] iio: hid-sensors: drop redundant iio_dev argument Sanjay Chitroda
2026-05-09 21:32   ` David Lechner
2026-05-09 10:10 ` [PATCH v3 2/9] iio: hid-sensors: cleanup codestyle warning Sanjay Chitroda
2026-05-09 21:35   ` David Lechner
2026-05-09 10:10 ` [PATCH v3 3/9] iio: hid-sensors: introduce device managed API Sanjay Chitroda
2026-05-10  6:36   ` Andy Shevchenko
2026-05-09 10:10 ` [PATCH v3 4/9] iio: gyro: hid-sensor-gyro-3d: cleanup codestyle warning Sanjay Chitroda
2026-05-09 21:38   ` David Lechner
2026-05-10  6:38   ` Andy Shevchenko
2026-05-09 10:10 ` [PATCH v3 5/9] iio: gyro: hid-sensor-gyro-3d: drop hid_sensor_remove_trigger() using devm API Sanjay Chitroda
2026-05-09 10:10 ` Sanjay Chitroda [this message]
2026-05-09 10:10 ` [PATCH v3 7/9] iio: humidity: hid-sensor-humidity: use common device for devres Sanjay Chitroda
2026-05-10  6:42   ` Andy Shevchenko
2026-05-09 10:10 ` [PATCH v3 8/9] iio: humidity: hid-sensor-humidity: use local struct device Sanjay Chitroda
2026-05-09 10:10 ` [PATCH v3 9/9] iio: humidity: hid-sensor-humidity: drop hid_sensor_remove_trigger() using devm API Sanjay Chitroda
2026-05-09 21:44 ` [PATCH v3 0/9] iio: introduce devm_ API for hid sensro setup and cleanup David Lechner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260509101040.791404-7-sanjayembedded@gmail.com \
    --to=sanjayembeddedse@gmail.com \
    --cc=andy@kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=jic23@kernel.org \
    --cc=jikos@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nuno.sa@analog.com \
    --cc=sakari.ailus@linux.intel.com \
    --cc=srinivas.pandruvada@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox