Re: [RFC 3/4] iio: light: add build support for APDS9999

[Jonathan Cameron <jic23@kernel.org>]

On Mon, 11 May 2026 12:14:50 +0200
"Jose A. Perez de Azpillaga" <azpijr@gmail.com> wrote:

> Add Kconfig entry and Makefile rule for the APDS9999 driver.
> 
> Signed-off-by: Jose A. Perez de Azpillaga <azpijr@gmail.com>
Squash with previous patch.   There are some corners of the kernel
where they have a pattern of building up particularly complex drivers
in multiple patches that won't compile then adding build support.

We never do that in IIO each patch must build whatever was added
(slightly exception for complex multi module drivers where it can
 be tricky to do).

Anyhow, short story is merge with previous.

> ---
>  drivers/iio/light/Kconfig  | 10 ++++++++++
>  drivers/iio/light/Makefile |  1 +
>  2 files changed, 11 insertions(+)
> 
> diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
> index eff33e456c70..c7256ffb972d 100644
> --- a/drivers/iio/light/Kconfig
> +++ b/drivers/iio/light/Kconfig
> @@ -119,6 +119,16 @@ config APDS9960
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called apds9960
>  
> +config APDS9999
> +	tristate "APDS9999 ambient light sensor"
> +	depends on I2C
> +	help
> +	  Say Y here if you want to build support for the Broadcom APDS9999
> +	  ambient light sensor (ALS/Lux).
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called apds9999.
> +
>  config AS73211
>  	tristate "AMS AS73211 XYZ color sensor and AMS AS7331 UV sensor"
>  	depends on I2C
> diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
> index c0048e0d5ca8..39e62dfc10c7 100644
> --- a/drivers/iio/light/Makefile
> +++ b/drivers/iio/light/Makefile
> @@ -14,6 +14,7 @@ obj-$(CONFIG_APDS9160)		+= apds9160.o
>  obj-$(CONFIG_APDS9300)		+= apds9300.o
>  obj-$(CONFIG_APDS9306)		+= apds9306.o
>  obj-$(CONFIG_APDS9960)		+= apds9960.o
> +obj-$(CONFIG_APDS9999)		+= apds9999.o
>  obj-$(CONFIG_AS73211)		+= as73211.o
>  obj-$(CONFIG_BH1745)		+= bh1745.o
>  obj-$(CONFIG_BH1750)		+= bh1750.o