Linux IIO development
 help / color / mirror / Atom feed
From: Gabriel Rondon <grondon@gmail.com>
To: Matti Vaittinen <mazziesaccount@gmail.com>,
	Jonathan Cameron <jic23@kernel.org>
Cc: "David Lechner" <dlechner@baylibre.com>,
	"Nuno Sá" <nuno.sa@analog.com>,
	"Andy Shevchenko" <andy@kernel.org>,
	linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/2] iio: accel: kionix-kx022a: use scan struct for one-shot and trigger reads
Date: Tue, 18 Aug 2026 22:51:21 +0100	[thread overview]
Message-ID: <20260818215122.52715-2-grondon@gmail.com> (raw)
In-Reply-To: <20260818215122.52715-1-grondon@gmail.com>

The driver kept two separate staging areas that hold the same thing:
buffer[8], a DMA-aligned area used by the one-shot read in
kx022a_get_axis() and by the triggered handler, and the scan struct,
used by the FIFO flush path. Both are three __le16 channels plus room
for the timestamp.

Drop buffer and route the one-shot read and the triggered handler
through scan.channels, so the driver has a single staging area. Move the
IIO_DMA_MINALIGN alignment onto scan, since it now backs the regmap bulk
reads that buffer used to.

No functional change. get_axis() only runs via read_raw() under
iio_device_claim_direct(), so it cannot run while the triggered buffer is
active, and the triggered handler only runs while it is; the two never
touch scan concurrently, exactly as they previously shared buffer.

Signed-off-by: Gabriel Rondon <grondon@gmail.com>
---
 drivers/iio/accel/kionix-kx022a.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/iio/accel/kionix-kx022a.c b/drivers/iio/accel/kionix-kx022a.c
index 02dd1db7a646..cf2cb751b4e8 100644
--- a/drivers/iio/accel/kionix-kx022a.c
+++ b/drivers/iio/accel/kionix-kx022a.c
@@ -301,11 +301,10 @@ struct kx022a_data {
 	__le16 *fifo_buffer;
 
 	/* 3 x 16bit accel data + timestamp */
-	__le16 buffer[8] __aligned(IIO_DMA_MINALIGN);
 	struct {
 		__le16 channels[3];
 		aligned_s64 ts;
-	} scan;
+	} scan __aligned(IIO_DMA_MINALIGN);
 };
 
 static const struct iio_mount_matrix *
@@ -613,12 +612,12 @@ static int kx022a_get_axis(struct kx022a_data *data,
 {
 	int ret;
 
-	ret = regmap_bulk_read(data->regmap, chan->address, &data->buffer[0],
-			       sizeof(__le16));
+	ret = regmap_bulk_read(data->regmap, chan->address,
+			       &data->scan.channels[0], sizeof(__le16));
 	if (ret)
 		return ret;
 
-	*val = (s16)le16_to_cpu(data->buffer[0]);
+	*val = (s16)le16_to_cpu(data->scan.channels[0]);
 
 	return IIO_VAL_INT;
 }
@@ -1029,12 +1028,12 @@ static irqreturn_t kx022a_trigger_handler(int irq, void *p)
 	struct kx022a_data *data = iio_priv(idev);
 	int ret;
 
-	ret = regmap_bulk_read(data->regmap, data->chip_info->xout_l, data->buffer,
-			       KX022A_FIFO_SAMPLES_SIZE_BYTES);
+	ret = regmap_bulk_read(data->regmap, data->chip_info->xout_l,
+			       data->scan.channels, KX022A_FIFO_SAMPLES_SIZE_BYTES);
 	if (ret < 0)
 		goto err_read;
 
-	iio_push_to_buffers_with_timestamp(idev, data->buffer, data->timestamp);
+	iio_push_to_buffers_with_timestamp(idev, &data->scan, data->timestamp);
 err_read:
 	iio_trigger_notify_done(idev->trig);
 
-- 
2.50.1 (Apple Git-155)


  reply	other threads:[~2026-08-18 21:51 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-18 21:51 [PATCH v2 0/2] iio: accel: kionix-kx022a: unify staging buffer and convert to iio_push_to_buffers_with_ts() Gabriel Rondon
2026-08-18 21:51 ` Gabriel Rondon [this message]
2026-08-19  4:59   ` [PATCH v2 1/2] iio: accel: kionix-kx022a: use scan struct for one-shot and trigger reads Matti Vaittinen
2026-08-19  7:17   ` Andy Shevchenko
2026-08-18 21:51 ` [PATCH v2 2/2] iio: accel: kionix-kx022a: use iio_push_to_buffers_with_ts() Gabriel Rondon
2026-08-19  5:11   ` Matti Vaittinen
2026-08-19  0:09 ` [PATCH v2 0/2] iio: accel: kionix-kx022a: unify staging buffer and convert to iio_push_to_buffers_with_ts() Jonathan Cameron
2026-08-19  5:15   ` Matti Vaittinen
2026-08-19  7:18     ` Andy Shevchenko
2026-08-19  7:19 ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260818215122.52715-2-grondon@gmail.com \
    --to=grondon@gmail.com \
    --cc=andy@kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mazziesaccount@gmail.com \
    --cc=nuno.sa@analog.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox