* [PULL] IIO: First set of new device support, features, cleanup and fixes for 7.4
@ 2026-09-30 17:42 Jonathan Cameron
2026-10-01 11:36 ` Greg KH
0 siblings, 1 reply; 2+ messages in thread
From: Jonathan Cameron @ 2026-09-30 17:42 UTC (permalink / raw)
To: gregkh, linux-iio
The following changes since commit 93f51579e7df248780214094418f205253383cc5:
Linux 7.3-rc4 (2026-09-20 13:48:15 -0700)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-7.4a
for you to fetch changes up to a3b3580713f3ac5a32dc2874ee546828977a1d68:
iio: dac: ad5758: Fix the offset calculation (2026-09-28 17:07:37 +0100)
----------------------------------------------------------------
IIO: 1st set of device support, features and cleanup for 7.4
2 merges
- v7.3-rc4 to get a x86 build fix needed by the ad9910 driver.
- devm_notifier_chain_register to pick up the IIO specific users of this
new infrastructure.
New device support
------------------
Major refactors or new drivers needed:
adi,ad3530r
- Support for the AD5710R and AD5711R 8 channel IDAC / VDAC parts.
Needed substantial driver rework to support channel type controls.
adi,ad5529r
- New driver for this 16 channel DAC with 12 and 16 bit variants.
adi,ad7768
- New driver for the 8 (AD7768) and 4 (AD7768-4) channel variants of this
24-bit simultaneous sampling ADC family. They are very different from
the 1 channel variant that has as separate driver.
adi,ad9910
- New driver for this DDS (Direct Digital Synthesizer). This was a large
undertaking is it is a complex chip requiring quite a lot of new IIO ABI.
Delayed from last cycle by an x86 bug that was fixed in rc4.
adi,ade9000
- Add support for the ADE9078 polyphase energy metering device.
Required significant changes to introduce multiple part support into
this driver.
adi,adis16201
- Add support for the ADIS16203 device, replacing the driver in staging.
axiado,saradc
- New driver for the SARADC found on the AX3000 and ADX3005 SoCs.
liteon,ltr501
- Add support for the LTR-329ALS-01 ambient light sensor. Included
various bits of driver modernization.
microchip,mcp48fev02
- Split previously I2C specific mcp47feb02 into core and I2C specific
parts.
- Add an SPI specific part for the many parts in the MCP48FxBy1/2/4/8
series of SPI DACS 24 different part numbers covering:
- 8, 10 and 12 bit resolutions
- 1, 2, 4, and 8 channels
- EEPROM and no non volatile storage variants.
- Substantial driver modification and cleanup was needed prior to the new
support.
maxim,max40080
- New driver for this current-sense amplifier with integrated ADC.
renesas,rzg2l_adc
- Support the RZ/G3L ADC 1 that is dedicate to the on-chip thermal
sensor unit. The thermal parts of this support will be going through
that tree.
sensortek,stk3310
- Add support for the STK36C61 Ambient Light, proximity and RGB color
sensor. Handling had to be added for RGB elements and the driver in
general had to be made ready for support multiple parts.
ti,ads1100
- Add support for the ADS1110 with faster data rate and 2.048V reference.
ti,ads112c04
- New driver to support this 16bit sigma-delta ADC.
vishay,veml6031x00
- New driver for this ambient light sensor that was built in in stages.
- Add triggered buffer data capture.
- Add support for events and triggers.
- Enable mysterious 'internal calibration' setting.
Minor additions such as IDs, compatibles or device specific data.
adi,ad3530r
- Support the AD3536R which is low resolution equivalent of the already
supported AD3532R.
adi,ad4080
- Support the AD4885 - only needed chip specific data.
aosong,am2315
- Add support for the AM2320, fully compatible wth the AM2315.
invensense,icm42600
- Minor tweaks + addition of compatible for the ICM42630 IMU.
mediatek,mt2701-adc
- Compatible for the MT6572
rockchip,saradc
- Support the RV1106.
Features
--------
IIO Core
- Add a helper to discover if timestamps are enabled. In a few cases
(typically when there is batching involved) we may have to refuse
to start the buffer if timestamps are enabled. Provided a helper
to allow that to be queried.
IIO backend
- CRC support.
infineon,dps310
- Add triggered buffer support.
linear,ltc2497
- Add 2x conversion speed mode.
- Add the internal temperature channel.
renesas,r9a09g077
- Add missing DMA properties to DT and enable use of DMA
- Expose the sampling frequency as per channel attributes.
ti,ad1015
- Add per channel labels from DT support.
ti,ads112c14
- Add dataready trigger using continuous mode if only one channel is
enabled.
- Add burnout current control including new IIO ABI.
- Add filter control.
- Add new ABI for settling time.
Cleanup and minor or late breaking fixes
----------------------------------------
Only calling out the more significant changes or ones that were carried
on out on several drivers.
multiple drivers
- Add sanity check for spi_device_get_match_data() returning NULL due
to use of driver_override.
- Add some useful __counted_by_ptr markings.
- Add some missing MODULE_DEVICE_TABLE() calls.
- Use dmaenginge_get_dma_device() instead of chan->device->dev
- A few precursor cleanups for planed devm_ object allocators.
- Disable autosuspend on exit. Note there is work ongoing to make
this unnecessary.
- Header reorders and IWYU being applied to what was included.
- Use devm_blocking_notifier_chain_register() to replace open coded
equivalent.
- Ensure some clk related structures are always fully initialized.
- Use the size checked iio_push_to_buffers_with_ts() replacement for
iio_push_to_buffers_with_timestamp().
- Avoid shadowing various error codes from store() callbacks.
adi,axi-adc
- Fix missing mutex_init()
adi,ad4080
- Ensure autoincrement is set for multi register reads.
adi,ad5758
- Fix wrong offset calculation
- Reject out of range values rather than truncating values.
- Make sure buffer used for bulk acceses is DMA safe.
adi,ad7816
- Local lock to protect state by serializing accesses. A few extra locations
were added much later in the cycle.
- Stop using non DMA safe buffers by using spi_write_then_read()
to ensure the data was bounce buffered.
adi,adxl367
- Ensure interrupt mapping is resolved before device setup reducing work
done before potential deferral.
- Support INT2 pin.
asahi-kasei,ak8975
- Use BIT() and GENMASK() to improve readability of defines.
- Add an enum for scan mask elements.
- Switch to devm_ for all resources.
avago,apds9306
- Fix the default sampling frequency.
awinc,aw96103
- Fix an early return that stopped all channels being checked.
broadcom,iproc-adc
- General modernization and conversion to devm managed cleanup.
- Use dev_err_probe(), local dev pointer and drop some duplicate error
messages.
capella,cm32181
- Add device specific dt-binding as trivial-devices doesn't provide
vdd-supply or interrupt properties.
freescale,mma8452
- Modernize driver via guard(), IIO specific cleanup helpers and
bulk regulator handling.
infineon,dps310
- Add context analysis lock markings.
- Single local acquire / release per raw read.
- Replace opencoded get_unaligned_be24().
- Fix incorrect CFG_REG bit definitions.
invensense,icm42600
- Ensure ODR is updated when switching power mode to paper over a hardware
bug.
- Fix detecting ODR change in invalid data packets.
- Optimize high frequency data readback by not bothering to read the
FIFO count when the watermark is known to have been passed.
- Various other minor fixes.
isil,isl29028
- Fix a runtime pm reference leak.
liteon,ltr501
- Make the dt-binding property proximit-near-level only available
on parts that support it.
kionix,kx022a
- Use as structure to make the channel layout explicit and use that for
all cases (previously there were two similar buffers).
pulsed-light,lidar-lite-v2
- Move binding from trivial-devices to it's own file as there are power
enable and mode control pins that needs describing.
renesas,r9a09g077
- Drop some interrupt descriptions for interrupts that aren't connected to
the interrupt controller.
- Avoid direct reads when buffer enabled.
- Store the device PA and IRQ in state ready for the DMA support.
st,hts221
- Fix a potential division by zero if calibration data corrupted.
- Allow an unknown Who Am I value to support fallback dt-compatibles.
- Replace opencoded oversampling_ration_available handling with read_avail
callback.
st,stm32-adc
- Fix up some wrong minimum sample times.
ti,ads1100
- Fix readings after datarate change by ensuring a long enough wait for
a new sample.
ti,tmp117
- Fix case where cached state was updated before we know if the write
to the device succeeds.
vishay,veml3328
- Reshape the scale array to improve readability as it is made up
of value pairs.
----------------------------------------------------------------
Abdelnasser Hussein (4):
staging: iio: adc: ad7816: Sort headers alphabetically
staging: iio: adc: ad7816: Serialize SPI operations
staging: iio: adc: ad7816: Fix DMA safety issues in SPI transfers
staging: iio: adc: ad7816: Protect sysfs attributes with mutex
Adi Nata (4):
iio: humidity: hts221: report available values via read_avail()
iio: humidity: hts221: Allow unknown whoami for DT fallback
iio: humidity: hts221: use dev_err_probe() in probe paths
iio: humidity: hts221: fix division by zero in calibration parsing
Amiitesh TSP (1):
docs: fix typos in drivers/staging/iio
Andrei Stancovici (3):
iio: adc: ltc2497: add LTC2499 internal temperature channel
iio: adc: ltc2497: add 2x conversion speed mode
dt-bindings: iio: adc: lltc,ltc2497: generalise the title
Andy Shevchenko (8):
iio: light: Unshadow error codes in ->store()
iio: imu: inv_mpu6050: Unshadow error codes in ->store()
iio: chemical: sps30: Unshadow error codes in ->store()
iio: adc: pac1934: Unshadow error codes in ->store()
iio: magnetometer: ak8975: switch to using managed resources
iio: magnetometer: ak8975: unify messages with help of dev_err_probe()
iio: magnetometer: ak8975: use temporary variable for struct device
iio: magnetometer: ak8975: make use of the macros from bits.h
Antoniu Miclaus (13):
iio: adc: ade9000: introduce chip_info structure
dt-bindings: iio: adc: adi,ade9000: add adi,ade9078 compatible
iio: adc: ade9000: add support for ADE9078
docs: iio: ade9000: document ADE9078 support
iio: adc: ad4080: allow debugfs register access to both channels
dt-bindings: iio: update unreachable maintainer entries
dt-bindings: iio: accel: adi,adxl367: add interrupt-names
iio: accel: adxl367: use regmap_assign_bits()
iio: accel: adxl367: add support for INT2 interrupt pin
iio: accel: adxl367: resolve interrupt mapping before device setup
dt-bindings: iio: adc: ad4080: add AD4885 support
iio: adc: ad4080: add support for AD4885
iio: adc: ad4080: enable address ascension for chip identification
Ariana Lazar (12):
iio: dac: mcp47feb02: initialize dac_data field in channel data struct at probe
iio: dac: mcp47feb02: Fix gain field initialization for active channels
iio: dac: mcp47feb02: Return len when disabling EEPROM store
iio: dac: mcp47feb02: Increase EEPROM Programming Write Cycle Time
iio: dac: mcp47feb02: use field_get() instead of custom dynamic macros
iio: dac: mcp47feb02: correct typo from a comment
iio: dac: mcp47feb02: use field_prep() instead of custom dynamic macros
iio: dac: mcp47feb02: Avoid unjustified probe error on missing label
iio: dac: mcp47feb02: protect EEPROM store sequence with mutex
iio: dac: mcp47feb02: refactor MCP47FEB02 I2C driver into two modules
dt-bindings: iio: dac: add support for MCP48FEB02 SPI
iio: dac: add support for Microchip MCP48FEB02
Arka Mondal (3):
iio: dac: ad5758: Fix alignment for DMA safety
iio: dac: ad5758: Reject out-of-range raw values
iio: dac: ad5758: Fix the offset calculation
Biju Das (3):
dt-bindings: iio: adc: renesas,rzg2l-adc: Document RZ/G3L ADC for TSU
iio: adc: rzg2l_adc: Rename num_channels to max_channels
iio: adc: rzg2l_adc: Add RZ/G3L ADC support for TSU
Bill Wendling (3):
iio: gts-helper: add __counted_by_ptr to struct iio_gts
iio: adc: qcom-adc5-gen3: Annotate struct adc5_device_data with __counted_by_ptr
iio: add __counted_by_ptr attribute to channels in struct iio_dev
Carlos Casadiego (1):
iio: accel: kx022a: fix typo in comment
Chang Yu (1):
iio: light: ltr390: Remove stale TODOs
Cheick Traore (1):
iio: adc: stm32: fix minimum sampling time values
Cosmin Tanislav (7):
iio: adc: rzt2h: remove unused struct rzt2h_adc::max_channels
iio: adc: rzt2h: store IRQ in private state
iio: adc: rzt2h: store the physical address in private state
iio: adc: rzt2h: claim direct mode on single reads
iio: adc: rzt2h: implement DMA buffer support
iio: adc: rzt2h: expose sampling frequency
dt-bindings: iio: adc: renesas,r9a09g077-adc: document DMA support
David Lechner (TI) (10):
iio: adc: ti-ads112c14: add DRDY interrupt support
iio: adc: ti-ads112c14: create data read helper functions
iio: adc: ti-ads112c14: add continuous mode support
iio: adc: ti-ads112c14: add burnout current support
iio: ABI: add sysfs attribute for _burnoutraw
iio: adc: ti-ads112c14: support external clock
iio: adc: ti-ads112c14: add filter support
iio: ABI: add sinc4+sinc1+pf1 filter_type
iio: adc: ti-ads112c14: add settlingtime attribute
iio: ABI: add settlingtime attributes
Donggeun Yoo (1):
iio: light: vcnl4000: use sysfs_emit() for near_level
Eliav Farber (3):
notifier: add device-managed registration APIs
iio: light: iqs621-als: use devm_blocking_notifier_chain_register()
iio: position: iqs624: use devm_blocking_notifier_chain_register()
Esben Haabendal (7):
dt-bindings: iio: light: ltr501: Sort compatible enum array
dt-bindings: iio: light: ltr501: Add missing ltr303 compatible
dt-bindings: iio: light: ltr501: Add ltr329 compatible
iio: light: ltr501: Power down chip if request irq fails
iio: light: ltr501: Add ltr329 driver support
iio: light: ltr501: Fix sorting order of device arrays
dt-bindings: iio: light: ltr501: Make proximity-near-level conditional
Fabio Cesari (1):
iio: light: isl29028: fix runtime PM reference leak on error paths
Flaviu Nistor (2):
dt-bindings: iio: adc: ti,ads1015: Add label property
iio: adc: ti-ads1015: Add support for label
Frank Li (1):
iio: use dmaengine_get_dma_device() instead of chan->device->dev
Gabriel Rondon (5):
iio: accel: kionix-kx022a: use scan struct for one-shot and trigger reads
iio: accel: kionix-kx022a: use iio_push_to_buffers_with_ts()
iio: gyro: adxrs290: use iio_push_to_buffers_with_ts()
iio: gyro: bmg160: use iio_push_to_buffers_with_ts()
iio: gyro: itg3200: use iio_push_to_buffers_with_ts()
Geert Uytterhoeven (2):
iio: adc: meson-saradc: Make sure clk_init_data is fully initialized
iio: frequency: adf4350: Make sure clk_init_data is fully initialized
Giorgi Tchankvetadze (1):
iio: light: veml3328: reshape scale array for readability
Guangshuo Li (4):
iio: accel: kxcjk-1013: Disable autosuspend on remove
iio: accel: mma9551: disable autosuspend on remove
iio: accel: mma9553: disable autosuspend on remove
iio: adc: at91-sama5d2: disable autosuspend on remove
Hemanth Selam (1):
iio: fix typos in comments
Jakub Szczudlo (3):
dt-bindings: iio: adc: ti,ads1100: add support for ADS1110
iio: adc: ti-ads1100: Fix incorrect reading when datarate changed in single mode
iio: adc: ti-ads1100: Add ti-ads1110 support to ti-ads1100 driver
Janani Sunil (20):
spi: dt-bindings: Add spi-device-addr peripheral property
dt-bindings: iio: dac: Add AD5529R
iio: dac: Add AD5529R DAC driver support
iio: adc: adi-axi-adc: Initialize state mutex
dt-bindings: iio: adc: Add AD7768
iio: backend: Add support for CRC
iio: adc: adi-axi-adc: Add support for CRC
iio: adc: Add AD7768 and AD7768-4 core support
iio: adc: ad7768: Validate master clock rate
iio: adc: ad7768: Add power mode helper
iio: adc: ad7768: Derive output data rates
iio: adc: ad7768: Configure channel sampling profiles
iio: adc: ad7768: Add sampling frequency controls
iio: adc: ad7768: Add per-channel filter controls
iio: adc: ad7768: Wait for digital filters to settle
iio: adc: ad7768: Add calibration controls
iio: adc: ad7768: Add per-channel conversion delay
iio: adc: ad7768: Add VCM regulator support
iio: adc: ad7768: Register GPIO auxiliary device
Documentation: iio: Add AD7768 Documentation
Javier Carrasco (7):
iio: gts-helper: fix error headers
iio: rename stale IIO_DEV_ACQUIRE_ERR reference to IIO_DEV_ACQUIRE_FAILED
dt-bindings: iio: light: veml6030: add veml6031x00 ALS series
iio: light: add support for veml6031x00 ALS series
iio: light: veml6031x00: add support for triggered buffers
iio: light: veml6031x00: add support for events and trigger
iio: light: veml6031x00: Enable internal calibration
Jean-Baptiste Maneyrol (6):
iio: imu: inv_icm42600: sleep before enabling FIFO data
iio: imu: inv_icm42600: use 2 sensors fixed packet size of 16 bytes
iio: imu: inv_icm42600: simplify watermark computation by using GCD
iio: imu: inv_icm42600: do not read FIFO count for watermark it
iio: imu: inv_icm42600: fix odr change not caught in certain cases
iio: imu: inv_icm42600: force accel odr change when switching power mode
Jiale Yao (20):
iio: amplifiers: ad8366: reject devices without match data
iio: dac: ad5755: validate SPI match data
iio: dac: mcp4821: reject devices without match data
iio: frequency: adf4377: reject devices without match data
iio: imu: adis16400: validate SPI match data
iio: potentiometer: x9250: reject devices without match data
iio: pressure: bmp280: validate SPI match data
iio: adc: ad7192: reject devices without match data
iio: adc: ad7606: reject devices without match data
iio: adc: ad7768-1: reject devices without match data
iio: adc: max11205: reject devices without match data
iio: adc: mcp3911: reject devices without match data
iio: adc: ti-adc128s052: validate SPI match data
iio: adc: ti-ads1018: reject devices without match data
iio: adc: ti-ads131m02: reject devices without match data
iio: adc: ti-ads7950: validate SPI match data
iio: accel: adxl313: reject devices without match data
iio: accel: adxl372: reject devices without match data
iio: accel: adxl380: reject devices without match data
iio: accel: sca3000: reject devices without match data
Jonathan Cameron (2):
Merge tag 'devm_notifier_chain_register-for-7.4' into togreg
Merge tag 'v7.3-rc4' into togreg
Jorijn van der Graaf (8):
iio: imu: inv_icm42600: sort device id tables numerically
iio: imu: inv_icm42600: log whoami mismatch instead of failing probe
dt-bindings: iio: imu: icm42600: add icm42630
iio: light: stk3310: lower-case the i2c device ID names
dt-bindings: iio: light: stk33xx: document the Sensortek STK36C61
iio: light: stk3310: move the data registers into the channel address
iio: light: stk3310: add per-chip match data
iio: light: stk3310: support the Sensortek STK36C61
Joshua Crofts (14):
MAINTAINERS: add patchwork link to iio entry
iio: temperature: iqs620at-temp: make headers conform to IWYU
iio: temperature: ltc2983: reorder headers
iio: temperature: ltc2983: make headers conform to IWYU
iio: temperature: mlx90632: make headers conform to IWYU
iio: temperature: mlx90635: make headers conform to IWYU
iio: temperature: tmp117: sort headers alphabetically
iio: temperature: tmp117: make headers conform to IWYU
iio: temperature: tsys01: reorder headers
iio: temperature: tsys01: make headers conform to IWYU
iio: temperature: tsys02d: reorder headers
iio: temperature: tsys02d: make headers conform to IWYU
iio: adc: max14001: add missing MODULE_DEVICE_TABLE macro
iio: magnetometer: ak8975: add scan mask index enum
Karl Mehltretter (1):
docs: iio: Correct ADXL380 filter descriptions
Kees Cook (2):
iio: adc: ad7173: Remove const from chan_arr allocation type
iio: imu: st_lsm6dsx: Allocate ext_channels with ARRAY_SIZE()
Kim Seer Paller (6):
iio: ABI: Add DAC current powerdown attributes and 15kohm_to_gnd mode
dt-bindings: iio: dac: add adi,ad5710r.yaml
iio: dac: ad3530r: parameterize DAC resolution
iio: dac: ad3530r: add support for AD5710R/AD5711R
dt-bindings: iio: dac: ad3530r: add AD3536R
iio: dac: ad3530r: add support for AD3536R
Krzysztof Kozlowski (1):
dt-bindings: iio: Use consistent indentation in the example
Kyle Hsieh (2):
dt-bindings: iio: adc: ti,ads112c04: Add binding for ADS112C04
iio: adc: ti-ads112c04: Add support for TI ADS112C04
Lad Prabhakar (1):
dt-bindings: iio: adc: renesas,r9a09g077-adc: Drop unwired interrupts
Liviu Stan (1):
dt-bindings: iio: temperature: adi,ltc2983: Add ADT7604 datasheet link
Marcelo Schmitt (2):
iio: Fix typo in vendor name
iio: adc: ad4134: Drop import to empty name space
Marco Chen (1):
iio: accel: bma400: remove completed tasks from TODO list
Matti Vaittinen (2):
iio: pressure: rohm-bm1390: Fix AVE_NUM initialization
iio: accel: kionix-kx022a: Fix IPOL macro name
Mohamad Raizudeen (1):
staging: iio: frequency: ad9832/ad9834: add comment explaining do_div usage
Mohammad Shahid (9):
iio: adc: bcm_iproc_adc: Remove redundant probe error messages
iio: adc: bcm_iproc_adc: Introduce local device pointer
iio: adc: bcm_iproc_adc: Convert probe error handling to dev_err_probe()
iio: adc: bcm_iproc_adc: sort headers alphabetically
iio: adc: bcm_iproc_adc: fix include dependencies
iio: adc: bcm_iproc_adc: use devm-managed clock
iio: adc: bcm_iproc_adc: use devm-managed ADC cleanup
iio: adc: bcm_iproc_adc: use devm-managed mutex initialization
iio: adc: bcm_iproc_adc: use devm-managed IIO device registration
Nicolás Antinori (2):
dt-bindings: trivial-devices: add Aosong AM2315 and AM2320 chips
iio: humidity: am2315: add support for am2320
Nuno Sá (1):
iio: buffer-dmaengine: drop dead max_size computation
Peng Fan (1):
iio: chemical: ens160: use regmap_assign_bits() for conditional set/clear
Pengpeng Hou (1):
iio: accel: bma220: publish the SPI driver ACPI alias
Petar Stepanovic (2):
dt-bindings: iio: adc: add Axiado AX3000/AX3005 SARADC
iio: adc: add Axiado SARADC driver
Randy Dunlap (1):
docs: iio: backend: use literal block for commands
Rishab Madhugiri (1):
iio: core: Replace BUG() with WARN_ON_ONCE() and error return
Rob Herring (Arm) (1):
dt-bindings: iio: Add dedicated CM32181 schema
Rodrigo Alencar (17):
iio: ABI: add attributes for altcurrent channels
iio: ABI: raw, scale and offset for frequency/phase channels
iio: ABI: add parent entry for iio channels
iio: add IIO_FREQUENCY channel type
iio: core: support 64-bit register through debugfs
iio: core: create local __iio_chan_prefix_emit() for reuse
iio: test: add kunit tests for channel prefix naming generation
iio: core: add hierarchical channel relationships
dt-bindings: iio: frequency: add ad9910
iio: frequency: ad9910: initial driver implementation
iio: frequency: ad9910: add basic parallel port support
iio: frequency: ad9910: add digital ramp generator support
iio: frequency: ad9910: add RAM mode support
iio: frequency: ad9910: add output shift keying support
iio: frequency: ad9910: show channel priority in debugfs
iio: ABI: add docs for ad9910 sysfs and debugfs entries
docs: iio: add documentation for ad9910 driver
Rodrigo Gobbi (2):
dt-bindings: iio: proximity: move LIDAR-Lite v2 out of trivial-devices
dt-bindings: iio: proximity: document LIDAR-Lite v3 fallback compatible
Roman Vivchar (1):
dt-bindings: iio: adc: mediatek,mt2701-auxadc: add mt6572
Rupesh Majhi (7):
iio: pressure: dps310: fix CFG_REG bit definitions
iio: pressure: dps310: use a local device pointer in probe
iio: pressure: dps310: use get_unaligned_be24() for the 24-bit results
iio: pressure: dps310: take the lock once per raw read
iio: pressure: dps310: add triggered buffer support
iio: core: add an accessor for scan_timestamp
iio: pressure: dps310: check the lock markings with context analysis
Salah Triki (4):
iio: humidity: ens210: Extend I2C functionality check
iio: temperature: tmp117: fix calibbias cache update on I2C write failure
iio: proximity: aw96103: Fix early return in IRQ handler loop
iio: imu: adis16400: Check return value of spi_setup()
Sanjay Chitroda (4):
iio: accel: mma8452: convert to bulk regulator usage
iio: accel: mma8452: use local struct device
iio: accel: mma8452: Use IIO cleanup helpers
iio: accel: mma8452: use guard() to release mutexes
Shehryar Ahmad (7):
iio: accel: adis16201: fix channel order for buffer mode
iio: accel: adis16201: add SPI device ID table
iio: accel: adis16201: add OF device ID table
iio: accel: adis16201: prepare driver to support additional parts
iio: accel: adis16201: add ADIS16203 support
staging: iio: accel: remove adis16203, merged into mainline adis16201 driver
dt-bindings: iio: accel: adi,adis16201: add adis16203 compatible
Shengzhuo Wei (2):
iio: accel: adxl380: reject out-of-range FIFO entry count
iio: accel: adxl367: reject out-of-range FIFO entry count
Stefan Popa (2):
dt-bindings: iio: adc: add adi,max40080
iio: adc: add MAX40080 current-sense amplifier driver
Surendra Singh Chouhan (1):
iio: light: apds9999: register standby action after enabling device
Triet Hoang (1):
iio: cros_ec: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
Tsz Shan Chan (1):
iio: light: apds9306: fix default sampling frequency definition
Vladislav Leonov (1):
iio: adc: rockchip_saradc: Add support for RV1106
bui duc phuc (1):
iio: adc: sophgo-saradc: Handle errors from optional IRQ lookup
Documentation/ABI/testing/debugfs-iio-ad9910 | 23 +
Documentation/ABI/testing/debugfs-iio-backend | 16 +-
Documentation/ABI/testing/sysfs-bus-iio | 115 +
Documentation/ABI/testing/sysfs-bus-iio-adc | 9 +
.../ABI/testing/sysfs-bus-iio-frequency-ad9910 | 31 +
.../bindings/iio/accel/adi,adis16201.yaml | 6 +-
.../devicetree/bindings/iio/accel/adi,adxl367.yaml | 13 +-
.../devicetree/bindings/iio/adc/adi,ad4080.yaml | 38 +-
.../devicetree/bindings/iio/adc/adi,ad4130.yaml | 3 +-
.../devicetree/bindings/iio/adc/adi,ad4851.yaml | 8 +-
.../devicetree/bindings/iio/adc/adi,ad7173.yaml | 2 +-
.../devicetree/bindings/iio/adc/adi,ad7768-1.yaml | 6 +-
.../devicetree/bindings/iio/adc/adi,ad7768.yaml | 270 +++
.../devicetree/bindings/iio/adc/adi,ad7779.yaml | 30 +-
.../devicetree/bindings/iio/adc/adi,ade9000.yaml | 62 +-
.../devicetree/bindings/iio/adc/adi,max40080.yaml | 65 +
.../bindings/iio/adc/axiado,ax3000-saradc.yaml | 63 +
.../devicetree/bindings/iio/adc/lltc,ltc2497.yaml | 2 +-
.../bindings/iio/adc/maxim,max34408.yaml | 34 +-
.../bindings/iio/adc/mediatek,mt2701-auxadc.yaml | 1 +
.../bindings/iio/adc/nxp,lpc1850-adc.yaml | 2 +-
.../bindings/iio/adc/renesas,r9a09g077-adc.yaml | 22 +-
.../bindings/iio/adc/renesas,rzg2l-adc.yaml | 17 +-
.../devicetree/bindings/iio/adc/ti,ads1015.yaml | 6 +
.../devicetree/bindings/iio/adc/ti,ads1100.yaml | 10 +-
.../devicetree/bindings/iio/adc/ti,ads112c04.yaml | 149 ++
.../devicetree/bindings/iio/adc/ti,ads1298.yaml | 18 +-
.../devicetree/bindings/iio/addac/adi,ad74115.yaml | 3 +-
.../bindings/iio/addac/adi,ad74413r.yaml | 3 +-
.../devicetree/bindings/iio/dac/adi,ad3530r.yaml | 15 +-
.../devicetree/bindings/iio/dac/adi,ad5529r.yaml | 254 +++
.../devicetree/bindings/iio/dac/adi,ad5710r.yaml | 145 ++
.../bindings/iio/dac/microchip,mcp47feb02.yaml | 221 +-
.../bindings/iio/frequency/adi,ad9910.yaml | 209 ++
.../bindings/iio/imu/invensense,icm42600.yaml | 24 +-
.../devicetree/bindings/iio/light/adux1020.yaml | 8 +-
.../bindings/iio/light/amstaos,tsl2591.yaml | 2 +-
.../bindings/iio/light/capella,cm32181.yaml | 44 +
.../devicetree/bindings/iio/light/isl29018.yaml | 6 +-
.../bindings/iio/light/liteon,ltr501.yaml | 32 +-
.../devicetree/bindings/iio/light/noa1305.yaml | 4 +-
.../devicetree/bindings/iio/light/stk33xx.yaml | 19 +-
.../devicetree/bindings/iio/light/tsl2583.yaml | 4 +-
.../devicetree/bindings/iio/light/tsl2772.yaml | 14 +-
.../bindings/iio/light/vishay,veml6030.yaml | 21 +-
.../bindings/iio/pressure/infineon,dps310.yaml | 10 +-
.../iio/proximity/pulsedlight,lidar-lite-v2.yaml | 71 +
.../bindings/iio/proximity/vishay,vcnl3020.yaml | 6 +-
.../bindings/iio/temperature/adi,ltc2983.yaml | 1 +
.../bindings/spi/spi-peripheral-props.yaml | 7 +
.../devicetree/bindings/trivial-devices.yaml | 6 +-
Documentation/iio/ad7768.rst | 275 +++
Documentation/iio/ad9910.rst | 792 +++++++
Documentation/iio/ade9000.rst | 28 +-
Documentation/iio/adis16475.rst | 2 +-
Documentation/iio/adis16480.rst | 2 +-
Documentation/iio/adis16550.rst | 2 +-
Documentation/iio/adxl313.rst | 2 +-
Documentation/iio/adxl345.rst | 2 +-
Documentation/iio/adxl380.rst | 10 +-
Documentation/iio/index.rst | 2 +
MAINTAINERS | 74 +-
drivers/iio/accel/Kconfig | 7 +-
drivers/iio/accel/adis16201.c | 133 +-
drivers/iio/accel/adxl313_spi.c | 2 +
drivers/iio/accel/adxl367.c | 59 +-
drivers/iio/accel/adxl372_spi.c | 2 +
drivers/iio/accel/adxl380.c | 7 +
drivers/iio/accel/adxl380_spi.c | 2 +
drivers/iio/accel/bma220_spi.c | 3 +-
drivers/iio/accel/bma400_core.c | 2 -
drivers/iio/accel/kionix-kx022a.c | 22 +-
drivers/iio/accel/kionix-kx022a.h | 2 +-
drivers/iio/accel/kxcjk-1013.c | 1 +
drivers/iio/accel/mma8452.c | 145 +-
drivers/iio/accel/mma9551.c | 1 +
drivers/iio/accel/mma9553.c | 1 +
drivers/iio/accel/sca3000.c | 2 +
drivers/iio/adc/Kconfig | 86 +-
drivers/iio/adc/Makefile | 4 +
drivers/iio/adc/ad4080.c | 34 +-
drivers/iio/adc/ad4134.c | 1 -
drivers/iio/adc/ad7173.c | 3 +-
drivers/iio/adc/ad7192.c | 3 +
drivers/iio/adc/ad7606_spi.c | 6 +-
drivers/iio/adc/ad7768-1.c | 3 +
drivers/iio/adc/ad7768.c | 1921 ++++++++++++++++
drivers/iio/adc/ade9000.c | 180 +-
drivers/iio/adc/adi-axi-adc.c | 25 +
drivers/iio/adc/at91-sama5d2_adc.c | 10 +-
drivers/iio/adc/axiado_saradc.c | 277 +++
drivers/iio/adc/bcm_iproc_adc.c | 99 +-
drivers/iio/adc/ltc2497-core.c | 297 ++-
drivers/iio/adc/ltc2497.c | 42 +
drivers/iio/adc/ltc2497.h | 31 +-
drivers/iio/adc/max11205.c | 2 +
drivers/iio/adc/max14001.c | 1 +
drivers/iio/adc/max40080.c | 574 +++++
drivers/iio/adc/mcp3911.c | 2 +
drivers/iio/adc/meson_saradc.c | 2 +-
drivers/iio/adc/nxp-sar-adc.c | 2 +-
drivers/iio/adc/pac1934.c | 9 +-
drivers/iio/adc/rockchip_saradc.c | 16 +
drivers/iio/adc/rzg2l_adc.c | 29 +-
drivers/iio/adc/rzt2h_adc.c | 499 ++++-
drivers/iio/adc/sophgo-cv1800b-adc.c | 2 +
drivers/iio/adc/stm32-adc.c | 14 +-
drivers/iio/adc/stm32-dfsdm-adc.c | 4 +-
drivers/iio/adc/ti-adc128s052.c | 8 +-
drivers/iio/adc/ti-ads1015.c | 30 +
drivers/iio/adc/ti-ads1018.c | 6 +-
drivers/iio/adc/ti-ads1100.c | 188 +-
drivers/iio/adc/ti-ads112c04.c | 524 +++++
drivers/iio/adc/ti-ads112c14.c | 1298 ++++++++++-
drivers/iio/adc/ti-ads131m02.c | 2 +
drivers/iio/adc/ti-ads7950.c | 4 +-
drivers/iio/adc/ti_am335x_adc.c | 4 +-
drivers/iio/amplifiers/ad8366.c | 2 +
drivers/iio/buffer/industrialio-buffer-dmaengine.c | 8 +-
drivers/iio/chemical/ens160_core.c | 7 +-
drivers/iio/chemical/sps30.c | 11 +-
.../iio/common/cros_ec_sensors/cros_ec_sensors.c | 2 +-
.../common/cros_ec_sensors/cros_ec_sensors_core.c | 5 +-
drivers/iio/dac/Kconfig | 50 +-
drivers/iio/dac/Makefile | 5 +-
drivers/iio/dac/ad3530r.c | 321 ++-
drivers/iio/dac/ad3552r.c | 2 +-
drivers/iio/dac/ad5529r.c | 546 +++++
drivers/iio/dac/ad5755.c | 3 +
drivers/iio/dac/ad5758.c | 8 +-
drivers/iio/dac/ad8460.c | 2 +-
.../iio/dac/{mcp47feb02.c => mcp47feb02-core.c} | 393 +---
drivers/iio/dac/mcp47feb02-i2c.c | 145 ++
drivers/iio/dac/mcp47feb02-spi.c | 145 ++
drivers/iio/dac/mcp47feb02.h | 41 +
drivers/iio/dac/mcp4821.c | 7 +-
drivers/iio/dummy/iio_simple_dummy.c | 2 +-
drivers/iio/frequency/Kconfig | 21 +
drivers/iio/frequency/Makefile | 1 +
drivers/iio/frequency/ad9910.c | 2347 ++++++++++++++++++++
drivers/iio/frequency/adf4350.c | 2 +-
drivers/iio/frequency/adf4377.c | 3 +
drivers/iio/gyro/adxrs290.c | 4 +-
drivers/iio/gyro/bmg160_core.c | 4 +-
drivers/iio/gyro/itg3200_buffer.c | 3 +-
drivers/iio/humidity/Kconfig | 8 +-
drivers/iio/humidity/am2315.c | 34 +-
drivers/iio/humidity/ens210.c | 4 +-
drivers/iio/humidity/hts221_core.c | 168 +-
drivers/iio/humidity/hts221_i2c.c | 11 +-
drivers/iio/humidity/hts221_spi.c | 11 +-
drivers/iio/iio_core.h | 7 +
drivers/iio/imu/adis16400.c | 8 +-
drivers/iio/imu/inv_icm42600/inv_icm42600.h | 5 +-
drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c | 33 +-
drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c | 114 +-
drivers/iio/imu/inv_icm42600/inv_icm42600_core.c | 26 +-
drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c | 24 +-
drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c | 16 +-
drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c | 16 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 6 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 4 +-
drivers/iio/industrialio-backend.c | 33 +
drivers/iio/industrialio-core.c | 255 ++-
drivers/iio/industrialio-gts-helper.c | 2 +-
drivers/iio/light/Kconfig | 14 +
drivers/iio/light/Makefile | 1 +
drivers/iio/light/apds9306.c | 2 +-
drivers/iio/light/apds9999.c | 12 +-
drivers/iio/light/cros_ec_light_prox.c | 2 +-
drivers/iio/light/iqs621-als.c | 24 +-
drivers/iio/light/isl29018.c | 7 +-
drivers/iio/light/isl29028.c | 33 +-
drivers/iio/light/lm3533-als.c | 11 +-
drivers/iio/light/ltr390.c | 6 -
drivers/iio/light/ltr501.c | 113 +-
drivers/iio/light/stk3310.c | 203 +-
drivers/iio/light/tsl2583.c | 15 +-
drivers/iio/light/tsl2772.c | 16 +-
drivers/iio/light/vcnl4000.c | 3 +-
drivers/iio/light/veml3328.c | 53 +-
drivers/iio/light/veml6031x00.c | 1387 ++++++++++++
drivers/iio/magnetometer/ak8975.c | 234 +-
drivers/iio/position/iqs624-pos.c | 24 +-
drivers/iio/potentiometer/x9250.c | 7 +-
drivers/iio/pressure/Kconfig | 2 +
drivers/iio/pressure/Makefile | 2 +
drivers/iio/pressure/bmp280-spi.c | 2 +
drivers/iio/pressure/cros_ec_baro.c | 2 +-
drivers/iio/pressure/dps310.c | 313 ++-
drivers/iio/pressure/rohm-bm1390.c | 6 +-
drivers/iio/proximity/aw96103.c | 2 +-
drivers/iio/temperature/iqs620at-temp.c | 9 +-
drivers/iio/temperature/ltc2983.c | 19 +-
drivers/iio/temperature/mlx90632.c | 10 +-
drivers/iio/temperature/mlx90635.c | 11 +-
drivers/iio/temperature/tmp117.c | 18 +-
drivers/iio/temperature/tsys01.c | 17 +-
drivers/iio/temperature/tsys02d.c | 12 +-
drivers/iio/test/Kconfig | 13 +
drivers/iio/test/Makefile | 1 +
drivers/iio/test/iio-test-channel-prefix.c | 307 +++
drivers/iio/test/iio-test-rescale.c | 4 +-
.../iio/Documentation/sysfs-bus-iio-adc-ad7280a | 2 +-
drivers/staging/iio/Kconfig | 1 -
drivers/staging/iio/Makefile | 1 -
drivers/staging/iio/accel/Kconfig | 19 -
drivers/staging/iio/accel/Makefile | 6 -
drivers/staging/iio/accel/adis16203.c | 315 ---
drivers/staging/iio/adc/ad7816.c | 33 +-
drivers/staging/iio/frequency/ad9832.c | 6 +
drivers/staging/iio/frequency/ad9834.c | 6 +
include/linux/iio/adc/qcom-adc5-gen3-common.h | 2 +-
include/linux/iio/backend.h | 6 +
include/linux/iio/iio-gts-helper.h | 11 +-
include/linux/iio/iio-opaque.h | 2 +-
include/linux/iio/iio.h | 25 +-
include/linux/notifier.h | 7 +
include/uapi/linux/iio/types.h | 1 +
kernel/notifier.c | 105 +
tools/iio/iio_event_monitor.c | 2 +
221 files changed, 16070 insertions(+), 2246 deletions(-)
create mode 100644 Documentation/ABI/testing/debugfs-iio-ad9910
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9910
create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7768.yaml
create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,max40080.yaml
create mode 100644 Documentation/devicetree/bindings/iio/adc/axiado,ax3000-saradc.yaml
create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads112c04.yaml
create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ad5529r.yaml
create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ad5710r.yaml
create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,ad9910.yaml
create mode 100644 Documentation/devicetree/bindings/iio/light/capella,cm32181.yaml
create mode 100644 Documentation/devicetree/bindings/iio/proximity/pulsedlight,lidar-lite-v2.yaml
create mode 100644 Documentation/iio/ad7768.rst
create mode 100644 Documentation/iio/ad9910.rst
create mode 100644 drivers/iio/adc/ad7768.c
create mode 100644 drivers/iio/adc/axiado_saradc.c
create mode 100644 drivers/iio/adc/max40080.c
create mode 100644 drivers/iio/adc/ti-ads112c04.c
create mode 100644 drivers/iio/dac/ad5529r.c
rename drivers/iio/dac/{mcp47feb02.c => mcp47feb02-core.c} (69%)
create mode 100644 drivers/iio/dac/mcp47feb02-i2c.c
create mode 100644 drivers/iio/dac/mcp47feb02-spi.c
create mode 100644 drivers/iio/dac/mcp47feb02.h
create mode 100644 drivers/iio/frequency/ad9910.c
create mode 100644 drivers/iio/light/veml6031x00.c
create mode 100644 drivers/iio/test/iio-test-channel-prefix.c
delete mode 100644 drivers/staging/iio/accel/Kconfig
delete mode 100644 drivers/staging/iio/accel/Makefile
delete mode 100644 drivers/staging/iio/accel/adis16203.c
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-10-01 11:45 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-09-30 17:42 [PULL] IIO: First set of new device support, features, cleanup and fixes for 7.4 Jonathan Cameron
2026-10-01 11:36 ` Greg KH
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox