Re: [PATCH 5/8] iio: magnetometer: ak8975: unify messages with help of dev_err_probe()

["Nuno Sá" <noname.nuno@gmail.com>]

On Thu, 2026-05-07 at 16:35 +0200, Joshua Crofts via B4 Relay wrote:
> From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> 
> Unify error messages that might appear during probe phase by
> switching to use dev_err_probe().
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
> ---

Reviewed-by: Nuno Sá <nuno.sa@analog.com>

>  drivers/iio/magnetometer/ak8975.c | 30 ++++++++++--------------------
>  1 file changed, 10 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c
> index
> e575d252076acc3639cfbb718a76811636fe56d2..394f930b862e82fd41c02d81bc6fdb3cfc8b729f
> 100644
> --- a/drivers/iio/magnetometer/ak8975.c
> +++ b/drivers/iio/magnetometer/ak8975.c
> @@ -495,10 +495,8 @@ static int ak8975_who_i_am(const struct ak8975_data *data,
>  							AK09912_REG_WIA1,
>  							sizeof(wia_val),
>  							wia_val);
> -	if (ret < 0) {
> -		dev_err(&client->dev, "Error reading WIA\n");
> -		return ret;
> -	}
> +	if (ret < 0)
> +		return dev_err_probe(&client->dev, ret, "Error reading WIA\n");
>  
>  	if (wia_val[0] != AK8975_DEVICE_ID)
>  		return -ENODEV;
> @@ -996,18 +994,14 @@ static int ak8975_probe(struct i2c_client *client)
>  		return ret;
>  
>  	ret = ak8975_who_i_am(data, data->def->type);
> -	if (ret) {
> -		dev_err(&client->dev, "Unexpected device\n");
> -		return ret;
> -	}
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Unexpected device\n");
>  	dev_dbg(&client->dev, "Asahi compass chip %s\n", name);
>  
>  	/* Perform some basic start-of-day setup of the device. */
>  	ret = ak8975_setup(data);
> -	if (ret) {
> -		dev_err(&client->dev, "%s initialization fails\n", name);
> -		return ret;
> -	}
> +	if (ret)
> +		return dev_err_probe(dev, ret, "%s initialization fails\n", name);
>  
>  	ret = devm_mutex_init(dev, &data->lock);
>  	if (ret)
> @@ -1022,16 +1016,12 @@ static int ak8975_probe(struct i2c_client *client)
>  
>  	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
>  					      ak8975_handle_trigger, NULL);
> -	if (ret) {
> -		dev_err(&client->dev, "triggered buffer setup failed\n");
> -		return ret;
> -	}
> +	if (ret)
> +		return dev_err_probe(dev, ret, "triggered buffer setup failed\n");
>  
>  	ret = devm_iio_device_register(dev, indio_dev);
> -	if (ret) {
> -		dev_err(&client->dev, "device register failed\n");
> -		return ret;
> -	}
> +	if (ret)
> +		return dev_err_probe(dev, ret, "device register failed\n");
>  
>  	/* Enable runtime PM */
>  	ret = devm_pm_runtime_enable(dev);