Re: [PATCH 5/9] hwmon: (adt7410) Add device table entry for the adt7420

[Hartmut Knaack <knaack.h@gmx.de>]

Lars-Peter Clausen schrieb:
> The adt7420 is software compatible to the adt7410.
>
> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
> ---
>  drivers/hwmon/Kconfig   | 4 ++--
>  drivers/hwmon/adt7410.c | 3 ++-
>  2 files changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 52d5174..89ac1cb 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -180,11 +180,11 @@ config SENSORS_ADM9240
>  	  will be called adm9240.
>  
>  config SENSORS_ADT7410
> -	tristate "Analog Devices ADT7410"
> +	tristate "Analog Devices ADT7410/ADT7420"
>  	depends on I2C
>  	help
>  	  If you say yes here you get support for the Analog Devices
> -	  ADT7410 temperature monitoring chip.
> +	  ADT7410 and ADT7420 temperature monitoring chips.
>  
>  	  This driver can also be built as a module. If so, the module
>  	  will be called adt7410.
> diff --git a/drivers/hwmon/adt7410.c b/drivers/hwmon/adt7410.c
> index 99f6d32..99a7290 100644
> --- a/drivers/hwmon/adt7410.c
> +++ b/drivers/hwmon/adt7410.c
> @@ -407,6 +407,7 @@ static int adt7410_remove(struct i2c_client *client)
>  
>  static const struct i2c_device_id adt7410_ids[] = {
>  	{ "adt7410", adt7410, },
> +	{ "adt7420", adt7410, },
>  	{ /* LIST END */ }
>  };
>  MODULE_DEVICE_TABLE(i2c, adt7410_ids);
> @@ -455,5 +456,5 @@ static struct i2c_driver adt7410_driver = {
>  module_i2c_driver(adt7410_driver);
>  
>  MODULE_AUTHOR("Hartmut Knaack");
> -MODULE_DESCRIPTION("ADT7410 driver");
> +MODULE_DESCRIPTION("ADT7410/ADT7420 driver");
>  MODULE_LICENSE("GPL");