Linux IIO development
 help / color / mirror / Atom feed
 messages from 2026-11-15 00:16:52 to 2026-11-17 09:43:16 UTC [more...]

[PATCH v5 0/3] iio: adc: Add Nuvoton MA35D1 EADC support
 2026-11-17  9:43 UTC  (5+ messages)
` [PATCH v5 1/3] dt-bindings: iio: adc: Fix channel property validation
` [PATCH v5 2/3] dt-bindings: iio: adc: Add Nuvoton MA35D1 EADC
` [PATCH v5 3/3] iio: adc: Add Nuvoton MA35D1 EADC driver

[PATCH v1 0/3] iio: adc: Provide mult_fract() and make use of it
 2026-11-17  9:14 UTC  (4+ messages)
` [PATCH v1 1/3] math.h: Add mult_fract() that takes struct __Txx_fract as argument
` [PATCH v1 2/3] iio: adc: ad4030: Switch to use mult_fract() helper
` [PATCH v1 3/3] iio: adc: ltc2378: "

[PATCH v1 1/1] iio: light: opt4060: Remove dead code
 2026-11-17  9:10 UTC 

[PATCH 0/3] iio: pressure: dps310: add Goermicro SPL07-003
 2026-11-17  8:39 UTC  (4+ messages)
` [PATCH 1/3] dt-bindings: vendor-prefixes: Add Goermicro
` [PATCH 2/3] dt-bindings: iio: pressure: infineon,dps310: Add Goermicro SPL07-003
` [PATCH 3/3] iio: pressure: dps310: add Goermicro SPL07-003 support

[PATCH 0/5] iio: potentiometer: mcp4018: Add Analog Devices AD5246
 2026-11-17  8:27 UTC  (12+ messages)
` [PATCH 1/5] iio: ABI: Move out_resistance_raw_available to sysfs-bus-iio
` [PATCH 2/5] iio: potentiometer: mcp4018: Report the available wiper positions
` [PATCH 3/5] dt-bindings: iio: potentiometer: Add Analog Devices AD5246
` [PATCH 4/5] iio: potentiometer: mcp4018: Turn on the vdd supply
` [PATCH 5/5] iio: potentiometer: mcp4018: Add Analog Devices AD5246

[PATCH v4 0/5] Battery temperature ADC plumbing on Qualcomm platforms
 2026-11-17  8:23 UTC  (6+ messages)
` [PATCH v4 1/5] iio: adc: qcom-spmi-adc5: Add battery thermal channels
` [PATCH v4 2/5] dt-bindings: thermal: generic-adc: Document #io-channel-cells
` [PATCH v4 3/5] thermal/drivers/generic-adc: Allow probe without TZ registration
` [PATCH v4 4/5] arm64: dts: qcom: pm7250b: Define battery temperature ADC channels
` [PATCH v4 5/5] arm64: dts: qcom: sm7225-fairphone-fp4: Add battery temperature node

[PATCH v5 00/16] iio: adc: xilinx-xadc: Add I2C interface support for System Management Wizard
 2026-11-17  8:07 UTC  (4+ messages)
` [PATCH v5 13/16] iio: adc: xilinx-xadc: Add helper functions for the device setup

[PATCH RFC] regmap: kunit: add tests for values wider than val_bits
 2026-11-17  7:55 UTC 

[PATCH 00/35] iio: closing default trigger handling leaks
 2026-11-17  7:20 UTC  (46+ messages)
` [PATCH 01/35] iio: core: add default_trigger and take reference in iio_device_register()
` [PATCH 02/35] media: pci: mgb4: use IIO default_trigger
` [PATCH 03/35] iio: chemical: ens160: use default_trigger
` [PATCH 04/35] iio: adc: ad4130: "
` [PATCH 05/35] iio: adc: ad4170-4: "
` [PATCH 06/35] iio: adc: ad7768-1: "
` [PATCH 07/35] iio: adc: ad7779: "
` [PATCH 08/35] iio: adc: ti-ads131e08: "
` [PATCH 09/35] iio: addac: ad74115: "
` [PATCH 10/35] iio: addac: ad74413r: "
` [PATCH 11/35] iio: temperature: tmp006: "
` [PATCH 12/35] iio: adc: ad4062: "
` [PATCH 13/35] iio: accel: bma220: "
` [PATCH 14/35] iio: accel: bma400: "
` [PATCH 15/35] iio: imu: smi330: "
` [PATCH 16/35] iio: light: acpi-als: "
` [PATCH 17/35] iio: chemical: scd30: "
` [PATCH 18/35] iio: accel: bma180: "
` [PATCH 19/35] iio: accel: kxcjk-1013: "
` [PATCH 20/35] iio: accel: mma8452: "
` [PATCH 21/35] iio: chemical: ccs811: "
` [PATCH 22/35] iio: pressure: mpl3115: "
` [PATCH 23/35] iio: common: st_sensors: "
` [PATCH 24/35] iio: common: hid-sensors: "
` [PATCH 25/35] iio: pressure: bmp280: "
` [PATCH 26/35] iio: light: vl6180: "
` [PATCH 27/35] iio: gyro: itg3200: "
` [PATCH 28/35] iio: imu: bmi160: "
` [PATCH 29/35] iio: accel: adxl355: "
` [PATCH 30/35] iio: gyro: adxrs290: "
` [PATCH 31/35] iio: accel: adxl372: "
` [PATCH 32/35] iio: light: si1145: "
` [PATCH 33/35] iio: adc: ti-tsc2046: "
` [PATCH 34/35] iio: accel: mxc4005: "
` [PATCH 35/35] iio: gyro: mpu3050: "

[PATCH v2 0/4] iio: adc: Add support for MAX8907 ADC cell
 2026-11-17  7:14 UTC  (6+ messages)
` [PATCH v2 1/4] regulator: dt-bindings: maxim,max8907: Document io-channel-cells property
` [PATCH v2 2/4] mfd: max8907: Add ADC client support
` [PATCH v2 3/4] iio: adc: Add support for MAX8907 ADC cell
` [PATCH v2 4/4] mfd: max8907: Add "

[PATCH v2 0/2] iio: light: adux1020: guard() conversion and follow-up cleanup
 2026-11-17  7:11 UTC  (3+ messages)
` [PATCH v2 1/2] iio: light: adux1020: use guard() to simplify lock handling
` [PATCH v2 2/2] iio: light: adux1020: return early on unsupported channel types

[PATCH v2] dt-bindings: iio: adc: lltc,ltc2497: Make vref-supply optional for LTC2305/LTC2309
 2026-11-17  6:04 UTC 

[PATCH v2] iio: pressure: dps310: don't wait for new temperature in trigger handler
 2026-11-17  3:37 UTC  (9+ messages)

[PATCH v3] iio: gyro: bmg160: Discard pm_runtime_put_autosuspend() return values
 2026-11-17  3:28 UTC  (4+ messages)

[PATCH v5 0/3] iio: adc: add support for the MAX34417 Four-Channel High Dynamic Range Power Accumulator
 2026-11-17  3:22 UTC  (8+ messages)

[PATCH v3 0/2] iio: proximity: sx9310/sx9360: reject out-of-range hardware gain values
 2026-11-17  3:18 UTC  (5+ messages)

[PATCH v6 0/8] iio: imu: Add support for the ADI ADIS16607
 2026-11-17  3:15 UTC  (6+ messages)

[PATCH v3 0/5] Battery temperature ADC plumbing on Qualcomm platforms
 2026-11-17  3:11 UTC  (9+ messages)
` [PATCH v3 1/5] iio: adc: qcom-spmi-adc5: Add battery thermal channels
` [PATCH v3 3/5] thermal/drivers/generic-adc: Allow probe without TZ registration

[PATCH v3 0/2] iio: light: Add Capella CM3217 ambient light sensor
 2026-11-17  3:10 UTC  (8+ messages)
` [PATCH v3 1/2] dt-bindings: iio: light: Add Capella CM3217
` [PATCH v3 2/2] iio: light: Add Capella CM3217 ambient light sensor driver

[PATCH] spi: pl022: handle clk_prepare_enable() failure on runtime resume
 2026-11-17  3:02 UTC  (2+ messages)

[PATCH v4 1/4] dt-bindings: mfd: mxs-lradc: Fix interrupt order
 2026-11-16 22:51 UTC  (5+ messages)
` [PATCH v4 2/4] iio: adc: mxs-lradc: Fix trigger use-after-free on removal
` [PATCH v4 3/4] mfd: mxs-lradc: Pass parent IRQs to child drivers
` [PATCH v4 4/4] mfd: mxs-lradc: Convert to devm_clk_get_enabled()

[PATCH 0/6] iio: proximity: sx93xx: fix raw reads, thresholds, hysteresis and gain
 2026-11-16 20:53 UTC  (7+ messages)
` [PATCH 1/6] iio: proximity: sx_common: fix raw reads while the trigger is in use
` [PATCH 2/6] iio: proximity: sx9324: fix proximity threshold writes
` [PATCH 3/6] iio: proximity: sx9324: reject negative hysteresis values
` [PATCH 4/6] iio: proximity: sx9360: fix hardware gain encoding
` [PATCH 5/6] iio: proximity: sx9360: fix proximity threshold writes
` [PATCH 6/6] iio: proximity: sx9360: reject negative hysteresis values

[PATCH] iio: light: bh1745: fix 16-bit register accesses
 2026-11-16 19:42 UTC 

[PATCH v4 0/4] iio: light: ltr501: Add LTR-659PS-01 prox sensor support
 2026-11-16 19:21 UTC  (6+ messages)
` [PATCH v4 1/4] iio: light: ltr501: Switch to read_avail() op from manual attribute registration
` [PATCH v4 2/4] iio: light: ltr501: Switch to modern match mechanism
` [PATCH v4 3/4] dt-bindings: iio: light: ltr501: Document LTR659 proximity sensor
` [PATCH v4 4/4] iio: light: ltr501: Add support for the LTR-659PS-01 "

[PATCH v4 00/12] iio: frequency: ad9910: add IIO backend support
 2026-11-16 16:40 UTC  (13+ messages)
` [PATCH v4 01/12] iio: frequency: ad9910: powerdown fix
` [PATCH v4 02/12] iio: frequency: ad9910: round up FM gain scale
` [PATCH v4 03/12] iio: backend: use the consumer fwnode for named lookups
` [PATCH v4 04/12] iio: backend: add devm_iio_backend_get_optional()
` [PATCH v4 05/12] dt-bindings: iio: frequency: add adi,ad9910-axi-backend
` [PATCH v4 06/12] dt-bindings: iio: frequency: ad9910: add io-backends property
` [PATCH v4 07/12] iio: frequency: ad9910: move channel indexes into a shared header
` [PATCH v4 08/12] iio: frequency: ad9910: add axi backend driver
` [PATCH v4 09/12] iio: frequency: ad9910: support drctl control
` [PATCH v4 10/12] iio: frequency: ad9910: support iio backend
` [PATCH v4 11/12] iio: ABI: add integration_time for output channels
` [PATCH v4 12/12] docs: iio: ad9910: document DRCTL pin control

[PATCH v3 00/10] iio: frequency: ad9910: add IIO backend support
 2026-11-16 16:28 UTC  (4+ messages)
` [PATCH v3 08/10] iio: frequency: ad9910: support iio backend

[PATCH] iio: buffer: fix bounce buffer use-after-free on unregister
 2026-11-16 14:21 UTC  (4+ messages)

[PATCH v1] iio: core: Export iio_find_channel_from_si() helper
 2026-11-16 14:00 UTC  (2+ messages)

[PATCH v2 0/2] iio: chemical: add support for SGP41 sensor
 2026-11-16 12:28 UTC  (6+ messages)
` [PATCH v2 1/2] dt-bindings: iio: chemical: Add Sensirion SGP41 binding
` [PATCH v2 2/2] iio: chemical: Add support for Sensirion SGP41

[PATCH v2 0/2] iio: pressure: dps310: data-ready trigger
 2026-11-16 12:27 UTC  (3+ messages)
` [PATCH v2 1/2] dt-bindings: iio: pressure: infineon,dps310: Add interrupts

[PATCH v1 0/2] iio: proximity: add Imagis ISG5320A (Samsung Galaxy XCover5)
 2026-11-16 10:53 UTC  (5+ messages)
` [PATCH v1 1/2] dt-bindings: iio: proximity: add Imagis ISG5320A
` [PATCH v1 2/2] iio: proximity: add Imagis ISG5320A SAR sensor driver

[PATCH v3] iio: potentiostat: lmp91000: Handle configuration write errors
 2026-11-16  9:53 UTC  (5+ messages)

[PATCH v2 0/5] iio: chemical: sgp40: add funtions for serial number readback, self-test, and heater control
 2026-11-16  9:23 UTC  (11+ messages)
` [PATCH v2 2/5] iio: chemical: sgp40: Replace manual locking with guard()
` [PATCH v2 3/5] iio: chemical: sgp40: Implement get_serial_number-command
` [PATCH v2 5/5] iio: chemical: sgp40: Implement turn_heater_off-command

[RESEND PATCH 00/14] IIO: Ensure iio_trigger_poll() is of the device owned trigger
 2026-11-16  9:13 UTC  (3+ messages)
` [RESEND PATCH 03/14] iio: adc: max1027: poll own trigger from interrupt handler

[PATCH] iio: imu: st_lsm6dsx: fall back to 25 us/tick without a trim
 2026-11-16  8:55 UTC  (2+ messages)

[PATCH 0/5] HID: iio: Unify probe-path logging
 2026-11-16  6:42 UTC  (5+ messages)
` [PATCH 1/5] iio: Remove redundant probe error messages for HID device drivers

[PATCH 0/6] iio: adc: versal-sysmon: Add OT alarm, shutdown and thermal zone support
 2026-11-16  5:42 UTC  (12+ messages)
` [PATCH 2/6] iio: adc: versal-sysmon: validate temperature hysteresis
` [PATCH 3/6] iio: adc: versal-sysmon: disable interrupts on shutdown
` [PATCH 4/6] iio: adc: versal-sysmon: add over-temperature alarm events

[PATCH] iio: adc: max1027: complete the EOC wait when using an external trigger
 2026-11-15 20:45 UTC 

[BUG] iio: st_lsm6dsx: hw timestamp gain is 0 on ISM330DLC / LSM6DSL
 2026-11-15 20:26 UTC  (6+ messages)
    ` [PATCH] iio: imu: st_lsm6dsx: fall back to 25 us/tick without a trim

[PATCH 00/39] IIO: Continue removing deprecated iio_push_to_buffers_with_timestamp()
 2026-11-15 20:23 UTC  (6+ messages)
` [PATCH 05/39] iio: hid-sensors: use iio_push_to_buffers_with_ts()

[PATCH v3 0/7] HID: sensor: custom: use-after-free after remove
 2026-11-15  9:57 UTC  (3+ messages)

[PATCH v3] iio: trigger: fix use-after-free in current_trigger_store() on concurrent writers
 2026-11-15  4:23 UTC  (3+ messages)

[PATCH] iio: accel: msa311: use devm_mutex_init()
 2026-11-15  3:55 UTC  (2+ messages)

[PATCH 0/5] Add driver for Qualcomm QGauge (qcom_qg) fuel gauge
 2026-11-15  1:22 UTC  (2+ messages)

[PATCH] iio: adc: sun20i-gpadc: Use devm_reset_control_get_exclusive_deasserted() in sun20i_gpadc_probe()
 2026-11-15  1:09 UTC  (3+ messages)

[PATCH] staging: iio: frequency: ad9834: use devm_mutex_init()
 2026-11-15  1:04 UTC  (3+ messages)

[PATCH v6] dt-bindings: iio: adc: Convert xilinx-xadc bindings to YAML schema
 2026-11-15  1:03 UTC  (2+ messages)

[PATCH] iio: proximity: sx9310: fix semtech,proxraw-strength = <0>
 2026-11-15  0:52 UTC  (2+ messages)

[PATCH] iio: trigger: free hrtimer and loop triggers on configfs release
 2026-11-15  0:46 UTC  (2+ messages)

[PATCH v2] iio: imu: bmi270: fix zero timestamp in triggered buffer
 2026-11-15  0:35 UTC  (2+ messages)

[PATCH] iio: proximity: sx9324: reject reserved gain values on read
 2026-11-15  0:31 UTC  (4+ messages)

[PATCH 00/15] IIO: a bunch of llm-found fixes
 2026-11-15  0:26 UTC  (7+ messages)
` [PATCH 01/15] iio: buffer: let the block keep its DMA fence
` [PATCH 12/15] iio: imu: inv_mpu6050: don't disable the IRQ under lock

[PATCH v6 06/11] iio: adc: ti-ads1015: Remove ads1015_set_power_state()
 2026-11-15  0:18 UTC  (5+ messages)
` [PATCH v6 10/11] iio: adc: ti-ads1015: inline ads1015_set_conv_mode()
` [PATCH v6 11/11] iio: adc: ti-ads1015: Replace custom shift macros with FIELD_PREP/GET


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox