Linux IIO development
 help / color / mirror / Atom feed
* [PATCH] iio: imu: st_lsm6dsx: fall back to 25 us/tick without a trim
  2026-11-15  7:11   ` Francesco Lavra
@ 2026-11-15  8:17     ` Phil Williams
  2026-11-15  8:52       ` Lorenzo Bianconi
  0 siblings, 1 reply; 5+ messages in thread
From: Phil Williams @ 2026-11-15  8:17 UTC (permalink / raw)
  To: Francesco Lavra, Jonathan Cameron, linux-iio, Lorenzo Bianconi
  Cc: mario.tesi, linux-iio, stable, dlechner, nuno.sa, andy

[-- Attachment #1: Type: text/plain, Size: 4068 bytes --]

Hi all,

Patch attached. It is the fallback in st_lsm6dsx_init_hw_timer() as 
discussed.

On Toradex Linux 6.6.142, an ISM330DLC on SPI (whoami 0x6a) on a Verdin 
i.MX8M Plus published every FIFO sample with one timestamp until the 
scale was 25000 ns/tick again. After that the timestamp bytes advanced 
and pitch updated. I have not booted this patch on mainline. It applies 
cleanly on mainline 23c62304dde2.

This is my first kernel patch, please let me know if there is anything 
else I need to do.

Thanks,
Phil

On 15/11/2026 8:11 pm, Francesco Lavra wrote:
> On Sun, 2026-11-15 at 00:09 +0000, Jonathan Cameron wrote:
>> On Tue, 10 Nov 2026 02:38:14 +1300
>> Phil Williams <phil.williams@advisoft.co.nz> wrote:
>>
>>> Hey Guys,
>>>
>>> I ran into an issue where every FIFO sample from an ISM330DLC came out
>>> with the same timestamp, so our attitude math froze the pitch. The
>>> accelerometer and gyroscope values were fine. I've patched it locally,
>>> so this is just an FYI.
>>>
>>> Make what you want of it, but here is an AI generated description of
>>> the
>>> issue:
>>>
>>> Commit 8abbf45fcda0 ("iio: st_lsm6dsx: Fixed calibrated timestamp
>>> calculation") drops the timestamp scale for the older parts in this
>>> driver. Stable backport 981f3da383ce is what we hit, in 6.6.142.
>>>
>>> st_lsm6dsx_init_hw_timer() used to do:
>>>
>>>       hw->ts_gain = ST_LSM6DSX_TS_SENSITIVITY; /* 25000 ns/tick */
>>>
>>> That commit deletes the constant and reads the gain from the per-chip
>>> table:
>>>
>>>       hw->ts_gain = ts_settings->ts_sensitivity;
>>>
>>> ts_sensitivity is only filled in on the entries that already had
>>> freq_fine (LSM6DSO / LSM6DSR / LSM6DSV and that generation). The
>>> untagged-FIFO entries have no freq_fine register, so they were left at
>>> 0:
>>>
>>>       LSM6DS3
>>>       LSM6DS3H
>>>       LSM6DSL, LSM6DSM, ISM330DLC, LSM6DS3TR-C
>>>
>>> st_lsm6dsx_read_fifo() still does:
>>>
>>>       ts = data[1] << 16 | data[0] << 8 | data[3];
>>>       ts *= hw->ts_gain;
>>>       iio_push_to_buffers_with_timestamp(..., sensor->ts_ref + ts);
>>>
>>> With ts_gain == 0 every sample is published as ts_ref, the
>>> CLOCK_REALTIME value taken when the buffer was enabled. The accel and
>>> gyro values are fine. Only the timestamp is stuck. The raw count is
>>> still checked against 0xff0000 before the multiply, so ts_ref is
>>> refreshed when the counter gets there. At 25 µs/tick that is about 7
>>> minutes. The driver comment says 1.638 s, which is 2^16 ticks, but the
>>> test is 0xff0000.
>>>
>>> How we found it: an ISM330DLC on SPI (whoami 0x6a), on a Toradex Verdin
>>> i.MX8M Plus, after moving onto 6.6.142. Userspace integrates attitude
>>> from the delta of the IIO buffer timestamp and treats a non-increasing
>>> timestamp as dt = 0, so pitch, roll and yaw froze at the first sample.
>>> A
>>> strace of the process reading /dev/iio:deviceX showed the xyz int16s
>>> changing and the 8 timestamp bytes identical across samples. The same
>>> binary against the previous kernel, which still used the 25000
>>> constant,
>>> did not do this.
>>>
>>> Setting the old scale on those three entries fixes it. freq_fine stays
>>> unset, so the trim register is not read and the gain stays exactly
>>> 25000, which is what those parts had before:
>>>
>>>       .ts_sensitivity = 25000,
>>>       .ts_trim_coeff = 37500,
>>>
>>> After booting that kernel the timestamp bytes increment and pitch
>>> tracks
>>> the unit again. The entries that already had ts_sensitivity (25000, or
>>> 21701 on the freq_fine 0x4f part) were left alone.
>>>
>>> Fixes: 8abbf45fcda0 ("iio: st_lsm6dsx: Fixed calibrated timestamp
>>> calculation")
> This analysis looks correct to me too.
> But I wouldn't set .ts_trim_coeff for the parts where .freq_fine is 0: for
> those, there is no trimming to be done.
> So either set .ts_sensitivity = 25000 for all parts that currently don't
> have it set, or maybe better use 25000 in st_lsm6dsx_init_hw_timer() as a
> fallback value when .ts_sensitivity is not set.

[-- Attachment #2: 0001-iio-imu-st_lsm6dsx-fall-back-to-25-us-tick-without-a-trim.patch --]
[-- Type: text/plain, Size: 2159 bytes --]

From 141aa31454bd87ed20b185544456bf28692c4c2d Mon Sep 17 00:00:00 2001
From: Phil Williams <phil.williams@advisoft.co.nz>
Date: Sun, 15 Nov 2026 21:04:06 +1300
Subject: [PATCH] iio: imu: st_lsm6dsx: fall back to 25 us/tick without a trim

Commit 8abbf45fcda0 ("iio: st_lsm6dsx: Fixed calibrated timestamp
calculation") takes the FIFO timestamp scale from ts_sensitivity.
That field is only filled in for parts that have freq_fine. The
untagged-FIFO parts are left at zero:

  LSM6DS3
  LSM6DS3H
  LSM6DSL, LSM6DSM, ISM330DLC and LSM6DS3TR-C

st_lsm6dsx_read_fifo() multiplies the raw counter by hw->ts_gain, so
every sample is published with the timestamp taken when the buffer
was enabled. The accelerometer and gyroscope values still update.
Userspace that integrates attitude from the timestamp delta treats a
stuck timestamp as dt = 0.

These parts have no freq_fine register, so there is no trim to apply.
Use the previous fixed scale of 25000 ns/tick when ts_sensitivity is
unset. Entries that already set it are left alone.

Fixes: 8abbf45fcda0 ("iio: st_lsm6dsx: Fixed calibrated timestamp calculation")
Cc: stable@vger.kernel.org
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Phil Williams <phil.williams@advisoft.co.nz>
---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index 823f8ac..98db90a 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -2525,8 +2525,14 @@ static int st_lsm6dsx_init_hw_timer(struct st_lsm6dsx_hw *hw)
 			return err;
 	}
 
-	/* calibrate timestamp sensitivity */
+	/*
+	 * Parts with no freq_fine register have no trim and leave
+	 * ts_sensitivity unset. Those parts used a fixed 25 us/tick.
+	 * A zero gain publishes every FIFO sample with one timestamp.
+	 */
 	hw->ts_gain = ts_settings->ts_sensitivity;
+	if (!hw->ts_gain)
+		hw->ts_gain = 25000;
 	if (ts_settings->freq_fine) {
 		err = regmap_read(hw->regmap, ts_settings->freq_fine, &val);
 		if (err < 0)
-- 
2.53.0


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* Re: [PATCH] iio: imu: st_lsm6dsx: fall back to 25 us/tick without a trim
  2026-11-15  8:17     ` [PATCH] iio: imu: st_lsm6dsx: fall back to 25 us/tick without a trim Phil Williams
@ 2026-11-15  8:52       ` Lorenzo Bianconi
  2026-11-15 20:26         ` Jonathan Cameron
  0 siblings, 1 reply; 5+ messages in thread
From: Lorenzo Bianconi @ 2026-11-15  8:52 UTC (permalink / raw)
  To: Phil Williams
  Cc: Francesco Lavra, Jonathan Cameron, linux-iio, mario.tesi, stable,
	dlechner, nuno.sa, andy

[-- Attachment #1: Type: text/plain, Size: 7041 bytes --]

> Hi all,
> 
> Patch attached. It is the fallback in st_lsm6dsx_init_hw_timer() as
> discussed.
> 
> On Toradex Linux 6.6.142, an ISM330DLC on SPI (whoami 0x6a) on a Verdin
> i.MX8M Plus published every FIFO sample with one timestamp until the scale
> was 25000 ns/tick again. After that the timestamp bytes advanced and pitch
> updated. I have not booted this patch on mainline. It applies cleanly on
> mainline 23c62304dde2.
> 
> This is my first kernel patch, please let me know if there is anything else
> I need to do.
> 
> Thanks,
> Phil
> 
> On 15/11/2026 8:11 pm, Francesco Lavra wrote:
> > On Sun, 2026-11-15 at 00:09 +0000, Jonathan Cameron wrote:
> > > On Tue, 10 Nov 2026 02:38:14 +1300
> > > Phil Williams <phil.williams@advisoft.co.nz> wrote:
> > > 
> > > > Hey Guys,
> > > > 
> > > > I ran into an issue where every FIFO sample from an ISM330DLC came out
> > > > with the same timestamp, so our attitude math froze the pitch. The
> > > > accelerometer and gyroscope values were fine. I've patched it locally,
> > > > so this is just an FYI.
> > > > 
> > > > Make what you want of it, but here is an AI generated description of
> > > > the
> > > > issue:
> > > > 
> > > > Commit 8abbf45fcda0 ("iio: st_lsm6dsx: Fixed calibrated timestamp
> > > > calculation") drops the timestamp scale for the older parts in this
> > > > driver. Stable backport 981f3da383ce is what we hit, in 6.6.142.
> > > > 
> > > > st_lsm6dsx_init_hw_timer() used to do:
> > > > 
> > > >       hw->ts_gain = ST_LSM6DSX_TS_SENSITIVITY; /* 25000 ns/tick */
> > > > 
> > > > That commit deletes the constant and reads the gain from the per-chip
> > > > table:
> > > > 
> > > >       hw->ts_gain = ts_settings->ts_sensitivity;
> > > > 
> > > > ts_sensitivity is only filled in on the entries that already had
> > > > freq_fine (LSM6DSO / LSM6DSR / LSM6DSV and that generation). The
> > > > untagged-FIFO entries have no freq_fine register, so they were left at
> > > > 0:
> > > > 
> > > >       LSM6DS3
> > > >       LSM6DS3H
> > > >       LSM6DSL, LSM6DSM, ISM330DLC, LSM6DS3TR-C
> > > > 
> > > > st_lsm6dsx_read_fifo() still does:
> > > > 
> > > >       ts = data[1] << 16 | data[0] << 8 | data[3];
> > > >       ts *= hw->ts_gain;
> > > >       iio_push_to_buffers_with_timestamp(..., sensor->ts_ref + ts);
> > > > 
> > > > With ts_gain == 0 every sample is published as ts_ref, the
> > > > CLOCK_REALTIME value taken when the buffer was enabled. The accel and
> > > > gyro values are fine. Only the timestamp is stuck. The raw count is
> > > > still checked against 0xff0000 before the multiply, so ts_ref is
> > > > refreshed when the counter gets there. At 25 µs/tick that is about 7
> > > > minutes. The driver comment says 1.638 s, which is 2^16 ticks, but the
> > > > test is 0xff0000.
> > > > 
> > > > How we found it: an ISM330DLC on SPI (whoami 0x6a), on a Toradex Verdin
> > > > i.MX8M Plus, after moving onto 6.6.142. Userspace integrates attitude
> > > > from the delta of the IIO buffer timestamp and treats a non-increasing
> > > > timestamp as dt = 0, so pitch, roll and yaw froze at the first sample.
> > > > A
> > > > strace of the process reading /dev/iio:deviceX showed the xyz int16s
> > > > changing and the 8 timestamp bytes identical across samples. The same
> > > > binary against the previous kernel, which still used the 25000
> > > > constant,
> > > > did not do this.
> > > > 
> > > > Setting the old scale on those three entries fixes it. freq_fine stays
> > > > unset, so the trim register is not read and the gain stays exactly
> > > > 25000, which is what those parts had before:
> > > > 
> > > >       .ts_sensitivity = 25000,
> > > >       .ts_trim_coeff = 37500,
> > > > 
> > > > After booting that kernel the timestamp bytes increment and pitch
> > > > tracks
> > > > the unit again. The entries that already had ts_sensitivity (25000, or
> > > > 21701 on the freq_fine 0x4f part) were left alone.
> > > > 
> > > > Fixes: 8abbf45fcda0 ("iio: st_lsm6dsx: Fixed calibrated timestamp
> > > > calculation")
> > This analysis looks correct to me too.
> > But I wouldn't set .ts_trim_coeff for the parts where .freq_fine is 0: for
> > those, there is no trimming to be done.
> > So either set .ts_sensitivity = 25000 for all parts that currently don't
> > have it set, or maybe better use 25000 in st_lsm6dsx_init_hw_timer() as a
> > fallback value when .ts_sensitivity is not set.

> From 141aa31454bd87ed20b185544456bf28692c4c2d Mon Sep 17 00:00:00 2001
> From: Phil Williams <phil.williams@advisoft.co.nz>
> Date: Sun, 15 Nov 2026 21:04:06 +1300
> Subject: [PATCH] iio: imu: st_lsm6dsx: fall back to 25 us/tick without a trim
> 
> Commit 8abbf45fcda0 ("iio: st_lsm6dsx: Fixed calibrated timestamp
> calculation") takes the FIFO timestamp scale from ts_sensitivity.
> That field is only filled in for parts that have freq_fine. The
> untagged-FIFO parts are left at zero:
> 
>   LSM6DS3
>   LSM6DS3H
>   LSM6DSL, LSM6DSM, ISM330DLC and LSM6DS3TR-C
> 
> st_lsm6dsx_read_fifo() multiplies the raw counter by hw->ts_gain, so
> every sample is published with the timestamp taken when the buffer
> was enabled. The accelerometer and gyroscope values still update.
> Userspace that integrates attitude from the timestamp delta treats a
> stuck timestamp as dt = 0.
> 
> These parts have no freq_fine register, so there is no trim to apply.
> Use the previous fixed scale of 25000 ns/tick when ts_sensitivity is
> unset. Entries that already set it are left alone.
> 
> Fixes: 8abbf45fcda0 ("iio: st_lsm6dsx: Fixed calibrated timestamp calculation")
> Cc: stable@vger.kernel.org
> Suggested-by: Jonathan Cameron <jic23@kernel.org>
> Signed-off-by: Phil Williams <phil.williams@advisoft.co.nz>

Hi Phil,

just a nit inline Fixing it:

Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>

> ---
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> index 823f8ac..98db90a 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> @@ -2525,8 +2525,14 @@ static int st_lsm6dsx_init_hw_timer(struct st_lsm6dsx_hw *hw)
>  			return err;
>  	}
>  
> -	/* calibrate timestamp sensitivity */
> +	/*
> +	 * Parts with no freq_fine register have no trim and leave
> +	 * ts_sensitivity unset. Those parts used a fixed 25 us/tick.
> +	 * A zero gain publishes every FIFO sample with one timestamp.
> +	 */
>  	hw->ts_gain = ts_settings->ts_sensitivity;
> +	if (!hw->ts_gain)
> +		hw->ts_gain = 25000;

What about re-adding the macro here?

#define ST_LSM6DSX_TS_SENSITIVITY	25000UL /* 25us */

Regards,
Lorenzo

>  	if (ts_settings->freq_fine) {
>  		err = regmap_read(hw->regmap, ts_settings->freq_fine, &val);
>  		if (err < 0)
> -- 
> 2.53.0
> 


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH] iio: imu: st_lsm6dsx: fall back to 25 us/tick without a trim
  2026-11-15  8:52       ` Lorenzo Bianconi
@ 2026-11-15 20:26         ` Jonathan Cameron
  0 siblings, 0 replies; 5+ messages in thread
From: Jonathan Cameron @ 2026-11-15 20:26 UTC (permalink / raw)
  To: Lorenzo Bianconi
  Cc: Phil Williams, Francesco Lavra, linux-iio, mario.tesi, stable,
	dlechner, nuno.sa, andy

On Sun, 15 Nov 2026 09:52:19 +0100
Lorenzo Bianconi <lorenzo@kernel.org> wrote:

> > Hi all,
> > 
> > Patch attached. It is the fallback in st_lsm6dsx_init_hw_timer() as
> > discussed.
> > 
> > On Toradex Linux 6.6.142, an ISM330DLC on SPI (whoami 0x6a) on a Verdin
> > i.MX8M Plus published every FIFO sample with one timestamp until the scale
> > was 25000 ns/tick again. After that the timestamp bytes advanced and pitch
> > updated. I have not booted this patch on mainline. It applies cleanly on
> > mainline 23c62304dde2.
> > 
> > This is my first kernel patch, please let me know if there is anything else
> > I need to do.
Take a look a the documentation for submitting patches.  It needs
to be sent as an inline patch rather than an attachment.

That may be easiest done via the b4 tool and gateway depending on your
email set up.

Thanks,

Jonathan

> > 
> > Thanks,
> > Phil
> > 
> > On 15/11/2026 8:11 pm, Francesco Lavra wrote:  
> > > On Sun, 2026-11-15 at 00:09 +0000, Jonathan Cameron wrote:  
> > > > On Tue, 10 Nov 2026 02:38:14 +1300
> > > > Phil Williams <phil.williams@advisoft.co.nz> wrote:
> > > >   
> > > > > Hey Guys,
> > > > > 
> > > > > I ran into an issue where every FIFO sample from an ISM330DLC came out
> > > > > with the same timestamp, so our attitude math froze the pitch. The
> > > > > accelerometer and gyroscope values were fine. I've patched it locally,
> > > > > so this is just an FYI.
> > > > > 
> > > > > Make what you want of it, but here is an AI generated description of
> > > > > the
> > > > > issue:
> > > > > 
> > > > > Commit 8abbf45fcda0 ("iio: st_lsm6dsx: Fixed calibrated timestamp
> > > > > calculation") drops the timestamp scale for the older parts in this
> > > > > driver. Stable backport 981f3da383ce is what we hit, in 6.6.142.
> > > > > 
> > > > > st_lsm6dsx_init_hw_timer() used to do:
> > > > > 
> > > > >       hw->ts_gain = ST_LSM6DSX_TS_SENSITIVITY; /* 25000 ns/tick */
> > > > > 
> > > > > That commit deletes the constant and reads the gain from the per-chip
> > > > > table:
> > > > > 
> > > > >       hw->ts_gain = ts_settings->ts_sensitivity;
> > > > > 
> > > > > ts_sensitivity is only filled in on the entries that already had
> > > > > freq_fine (LSM6DSO / LSM6DSR / LSM6DSV and that generation). The
> > > > > untagged-FIFO entries have no freq_fine register, so they were left at
> > > > > 0:
> > > > > 
> > > > >       LSM6DS3
> > > > >       LSM6DS3H
> > > > >       LSM6DSL, LSM6DSM, ISM330DLC, LSM6DS3TR-C
> > > > > 
> > > > > st_lsm6dsx_read_fifo() still does:
> > > > > 
> > > > >       ts = data[1] << 16 | data[0] << 8 | data[3];
> > > > >       ts *= hw->ts_gain;
> > > > >       iio_push_to_buffers_with_timestamp(..., sensor->ts_ref + ts);
> > > > > 
> > > > > With ts_gain == 0 every sample is published as ts_ref, the
> > > > > CLOCK_REALTIME value taken when the buffer was enabled. The accel and
> > > > > gyro values are fine. Only the timestamp is stuck. The raw count is
> > > > > still checked against 0xff0000 before the multiply, so ts_ref is
> > > > > refreshed when the counter gets there. At 25 µs/tick that is about 7
> > > > > minutes. The driver comment says 1.638 s, which is 2^16 ticks, but the
> > > > > test is 0xff0000.
> > > > > 
> > > > > How we found it: an ISM330DLC on SPI (whoami 0x6a), on a Toradex Verdin
> > > > > i.MX8M Plus, after moving onto 6.6.142. Userspace integrates attitude
> > > > > from the delta of the IIO buffer timestamp and treats a non-increasing
> > > > > timestamp as dt = 0, so pitch, roll and yaw froze at the first sample.
> > > > > A
> > > > > strace of the process reading /dev/iio:deviceX showed the xyz int16s
> > > > > changing and the 8 timestamp bytes identical across samples. The same
> > > > > binary against the previous kernel, which still used the 25000
> > > > > constant,
> > > > > did not do this.
> > > > > 
> > > > > Setting the old scale on those three entries fixes it. freq_fine stays
> > > > > unset, so the trim register is not read and the gain stays exactly
> > > > > 25000, which is what those parts had before:
> > > > > 
> > > > >       .ts_sensitivity = 25000,
> > > > >       .ts_trim_coeff = 37500,
> > > > > 
> > > > > After booting that kernel the timestamp bytes increment and pitch
> > > > > tracks
> > > > > the unit again. The entries that already had ts_sensitivity (25000, or
> > > > > 21701 on the freq_fine 0x4f part) were left alone.
> > > > > 
> > > > > Fixes: 8abbf45fcda0 ("iio: st_lsm6dsx: Fixed calibrated timestamp
> > > > > calculation")  
> > > This analysis looks correct to me too.
> > > But I wouldn't set .ts_trim_coeff for the parts where .freq_fine is 0: for
> > > those, there is no trimming to be done.
> > > So either set .ts_sensitivity = 25000 for all parts that currently don't
> > > have it set, or maybe better use 25000 in st_lsm6dsx_init_hw_timer() as a
> > > fallback value when .ts_sensitivity is not set.  
> 
> > From 141aa31454bd87ed20b185544456bf28692c4c2d Mon Sep 17 00:00:00 2001
> > From: Phil Williams <phil.williams@advisoft.co.nz>
> > Date: Sun, 15 Nov 2026 21:04:06 +1300
> > Subject: [PATCH] iio: imu: st_lsm6dsx: fall back to 25 us/tick without a trim
> > 
> > Commit 8abbf45fcda0 ("iio: st_lsm6dsx: Fixed calibrated timestamp
> > calculation") takes the FIFO timestamp scale from ts_sensitivity.
> > That field is only filled in for parts that have freq_fine. The
> > untagged-FIFO parts are left at zero:
> > 
> >   LSM6DS3
> >   LSM6DS3H
> >   LSM6DSL, LSM6DSM, ISM330DLC and LSM6DS3TR-C
> > 
> > st_lsm6dsx_read_fifo() multiplies the raw counter by hw->ts_gain, so
> > every sample is published with the timestamp taken when the buffer
> > was enabled. The accelerometer and gyroscope values still update.
> > Userspace that integrates attitude from the timestamp delta treats a
> > stuck timestamp as dt = 0.
> > 
> > These parts have no freq_fine register, so there is no trim to apply.
> > Use the previous fixed scale of 25000 ns/tick when ts_sensitivity is
> > unset. Entries that already set it are left alone.
> > 
> > Fixes: 8abbf45fcda0 ("iio: st_lsm6dsx: Fixed calibrated timestamp calculation")
> > Cc: stable@vger.kernel.org
> > Suggested-by: Jonathan Cameron <jic23@kernel.org>
> > Signed-off-by: Phil Williams <phil.williams@advisoft.co.nz>  
> 
> Hi Phil,
> 
> just a nit inline Fixing it:
> 
> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
> 
> > ---
> >  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 8 +++++++-
> >  1 file changed, 7 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > index 823f8ac..98db90a 100644
> > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> > @@ -2525,8 +2525,14 @@ static int st_lsm6dsx_init_hw_timer(struct st_lsm6dsx_hw *hw)
> >  			return err;
> >  	}
> >  
> > -	/* calibrate timestamp sensitivity */
> > +	/*
> > +	 * Parts with no freq_fine register have no trim and leave
> > +	 * ts_sensitivity unset. Those parts used a fixed 25 us/tick.
> > +	 * A zero gain publishes every FIFO sample with one timestamp.
> > +	 */
> >  	hw->ts_gain = ts_settings->ts_sensitivity;
> > +	if (!hw->ts_gain)
> > +		hw->ts_gain = 25000;  
> 
> What about re-adding the macro here?
> 
> #define ST_LSM6DSX_TS_SENSITIVITY	25000UL /* 25us */
> 
> Regards,
> Lorenzo
> 
> >  	if (ts_settings->freq_fine) {
> >  		err = regmap_read(hw->regmap, ts_settings->freq_fine, &val);
> >  		if (err < 0)
> > -- 
> > 2.53.0
> >   
> 


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH] iio: imu: st_lsm6dsx: fall back to 25 us/tick without a trim
@ 2026-11-15 21:40 Phil Williams via B4 Relay
  2026-11-16  8:55 ` Lorenzo Bianconi
  0 siblings, 1 reply; 5+ messages in thread
From: Phil Williams via B4 Relay @ 2026-11-15 21:40 UTC (permalink / raw)
  To: Lorenzo Bianconi, Jonathan Cameron, David Lechner, Nuno Sá,
	Andy Shevchenko, Mario Tesi
  Cc: linux-iio, linux-kernel, Jonathan Cameron, stable, Phil Williams

From: Phil Williams <phil.williams@advisoft.co.nz>

Commit 8abbf45fcda0 ("iio: st_lsm6dsx: Fixed calibrated timestamp
calculation") takes the FIFO timestamp scale from ts_sensitivity.
That field is only filled in for parts that have freq_fine. The
untagged-FIFO parts are left at zero:

  LSM6DS3
  LSM6DS3H
  LSM6DSL, LSM6DSM, ISM330DLC and LSM6DS3TR-C

st_lsm6dsx_read_fifo() multiplies the raw counter by hw->ts_gain, so
every sample is published with the timestamp taken when the buffer
was enabled. The accelerometer and gyroscope values still update.
Userspace that integrates attitude from the timestamp delta treats a
stuck timestamp as dt = 0.

These parts have no freq_fine register, so there is no trim to apply.
Use the previous fixed scale of 25000 ns/tick when ts_sensitivity is
unset. Entries that already set it are left alone.

Fixes: 8abbf45fcda0 ("iio: st_lsm6dsx: Fixed calibrated timestamp calculation")
Cc: stable@vger.kernel.org
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Phil Williams <phil.williams@advisoft.co.nz>
---
Resending inline. The first copy went out as an attachment.
No code changes.
---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index 823f8ac66..98db90a30 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -2525,8 +2525,14 @@ static int st_lsm6dsx_init_hw_timer(struct st_lsm6dsx_hw *hw)
 			return err;
 	}
 
-	/* calibrate timestamp sensitivity */
+	/*
+	 * Parts with no freq_fine register have no trim and leave
+	 * ts_sensitivity unset. Those parts used a fixed 25 us/tick.
+	 * A zero gain publishes every FIFO sample with one timestamp.
+	 */
 	hw->ts_gain = ts_settings->ts_sensitivity;
+	if (!hw->ts_gain)
+		hw->ts_gain = 25000;
 	if (ts_settings->freq_fine) {
 		err = regmap_read(hw->regmap, ts_settings->freq_fine, &val);
 		if (err < 0)

---
base-commit: fa2933aac170dd19c6a7f0d7b81a8f537e40915c
change-id: 20261116-st-lsm6dsx-ts-fallback-cd21f1d1e30e

Best regards,
--  
Phil Williams <phil.williams@advisoft.co.nz>



^ permalink raw reply related	[flat|nested] 5+ messages in thread

* Re: [PATCH] iio: imu: st_lsm6dsx: fall back to 25 us/tick without a trim
  2026-11-15 21:40 [PATCH] iio: imu: st_lsm6dsx: fall back to 25 us/tick without a trim Phil Williams via B4 Relay
@ 2026-11-16  8:55 ` Lorenzo Bianconi
  0 siblings, 0 replies; 5+ messages in thread
From: Lorenzo Bianconi @ 2026-11-16  8:55 UTC (permalink / raw)
  To: phil.williams
  Cc: Jonathan Cameron, David Lechner, Nuno Sá, Andy Shevchenko,
	Mario Tesi, linux-iio, linux-kernel, stable

[-- Attachment #1: Type: text/plain, Size: 2772 bytes --]

On Nov 16, Phil Williams via B4 Relay wrote:
> From: Phil Williams <phil.williams@advisoft.co.nz>
> 
> Commit 8abbf45fcda0 ("iio: st_lsm6dsx: Fixed calibrated timestamp
> calculation") takes the FIFO timestamp scale from ts_sensitivity.
> That field is only filled in for parts that have freq_fine. The
> untagged-FIFO parts are left at zero:
> 
>   LSM6DS3
>   LSM6DS3H
>   LSM6DSL, LSM6DSM, ISM330DLC and LSM6DS3TR-C
> 
> st_lsm6dsx_read_fifo() multiplies the raw counter by hw->ts_gain, so
> every sample is published with the timestamp taken when the buffer
> was enabled. The accelerometer and gyroscope values still update.
> Userspace that integrates attitude from the timestamp delta treats a
> stuck timestamp as dt = 0.
> 
> These parts have no freq_fine register, so there is no trim to apply.
> Use the previous fixed scale of 25000 ns/tick when ts_sensitivity is
> unset. Entries that already set it are left alone.
> 
> Fixes: 8abbf45fcda0 ("iio: st_lsm6dsx: Fixed calibrated timestamp calculation")
> Cc: stable@vger.kernel.org
> Suggested-by: Jonathan Cameron <jic23@kernel.org>
> Signed-off-by: Phil Williams <phil.williams@advisoft.co.nz>
> ---
> Resending inline. The first copy went out as an attachment.
> No code changes.
> ---
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> index 823f8ac66..98db90a30 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> @@ -2525,8 +2525,14 @@ static int st_lsm6dsx_init_hw_timer(struct st_lsm6dsx_hw *hw)
>  			return err;
>  	}
>  
> -	/* calibrate timestamp sensitivity */
> +	/*
> +	 * Parts with no freq_fine register have no trim and leave
> +	 * ts_sensitivity unset. Those parts used a fixed 25 us/tick.
> +	 * A zero gain publishes every FIFO sample with one timestamp.
> +	 */
>  	hw->ts_gain = ts_settings->ts_sensitivity;
> +	if (!hw->ts_gain)
> +		hw->ts_gain = 25000;

I guess the patch is fine but it seems a bit weird to set .ts_sensitivity to
25000 for ST_LSM6DSR_* family in st_lsm6dsx_sensor_settings array and keep this
chek here. Is it better to just add the missing info in
st_lsm6dsx_sensor_settings? (I do not have a strong opinion about it).

Regards,
Lorenzo

>  	if (ts_settings->freq_fine) {
>  		err = regmap_read(hw->regmap, ts_settings->freq_fine, &val);
>  		if (err < 0)
> 
> ---
> base-commit: fa2933aac170dd19c6a7f0d7b81a8f537e40915c
> change-id: 20261116-st-lsm6dsx-ts-fallback-cd21f1d1e30e
> 
> Best regards,
> --  
> Phil Williams <phil.williams@advisoft.co.nz>
> 
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2026-11-16  8:55 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-15 21:40 [PATCH] iio: imu: st_lsm6dsx: fall back to 25 us/tick without a trim Phil Williams via B4 Relay
2026-11-16  8:55 ` Lorenzo Bianconi
  -- strict thread matches above, loose matches on Subject: below --
2026-11-09 13:38 [BUG] iio: st_lsm6dsx: hw timestamp gain is 0 on ISM330DLC / LSM6DSL Phil Williams
2026-11-15  0:09 ` Jonathan Cameron
2026-11-15  7:11   ` Francesco Lavra
2026-11-15  8:17     ` [PATCH] iio: imu: st_lsm6dsx: fall back to 25 us/tick without a trim Phil Williams
2026-11-15  8:52       ` Lorenzo Bianconi
2026-11-15 20:26         ` Jonathan Cameron

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox