[PATCH v4 0/2] iio: light: veml3328: add support for new sensor

[PATCH v4 0/2] iio: light: veml3328: add support for new sensor

[Joshua Crofts]

This patch series adds support for the Vishay VEML3328 RGBCIR light
sensor. The sensor communicates via I2C (SMBus compatible) and provides
5 types of 16-bit measurements: red, green, blue, clear and infrared.

Reasons for adding a new driver:
- Existing Vishay drivers in the kernel do not cover sensors that
  handle RGBC and IR simultaneously.
- The register map and configuration differ from other Vishay light
  sensors currently supported by IIO.

Testing:
- Tested on a Raspberry Pi 4 using a VEML3328 breakout board.

Datasheet:
https://www.vishay.com/docs/84968/veml3328.pdf

Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
---
Changes in v4:
- Fix PM_RUNTIME_ACQUIRE_AUTOSUSPEND() macro cleanup scope
- Add mutex to prevent race in veml3328_write_raw()
- Link to v3: https://lore.kernel.org/r/20260530-veml3328-v3-0-dd562eaee8d9@gmail.com

Changes in v2:
- Add additional IIO_LIGHT channel for ambient light sensing
- Remove separate dt binding file and added veml3328 entry to veml6030
  yaml
- Move driver to PM_RUNTIME_ACQUIRE_AUTOSUSPEND() macro
- Add missing headers
- Remov redundant mutex as regmap handles it itself
- Use regmap_set/clear_bits() instead of regmap_update_bits()
- Removed redundant dev pointer
- Edit commit messages
- Various code style cleanups
- Link to v1: https://patch.msgid.link/20260516-veml3328-v1-0-1d4b663e2fe3@gmail.com

Changes in v3:
- Add 2D array of precomputed scale values based on integration time
- Fix chan_spec masks
- Simplify read/write/avail callbacks

Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>

---
Joshua Crofts (2):
      dt-bindings: iio: light: veml6030: add veml3328
      iio: light: veml3328: add support for new device

 .../bindings/iio/light/vishay,veml6030.yaml        |   5 +-
 MAINTAINERS                                        |   5 +
 drivers/iio/light/Kconfig                          |  11 +
 drivers/iio/light/Makefile                         |   1 +
 drivers/iio/light/veml3328.c                       | 422 +++++++++++++++++++++
 5 files changed, 443 insertions(+), 1 deletion(-)
---
base-commit: 7b84b1e9dd850a5c9b55e27daa4ecdc2dd5b3431
change-id: 20260530-veml3328-d2ccb26d02c7

Best regards,
-- 
Joshua Crofts <joshua.crofts1@gmail.com>

[PATCH v4 1/2] dt-bindings: iio: light: veml6030: add veml3328

[Joshua Crofts]

The Vishay VEML3328 is an RGBCIR light sensor that shares similar
devicetree properties as other existing VEMLxxxx sensors in the
kernel.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
---
 Documentation/devicetree/bindings/iio/light/vishay,veml6030.yaml | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/iio/light/vishay,veml6030.yaml b/Documentation/devicetree/bindings/iio/light/vishay,veml6030.yaml
index 4ea69f1fdd63..0041e1db6838 100644
--- a/Documentation/devicetree/bindings/iio/light/vishay,veml6030.yaml
+++ b/Documentation/devicetree/bindings/iio/light/vishay,veml6030.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/light/vishay,veml6030.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: VEML3235, VEML6030, VEML6035 and VEML7700 Ambient Light Sensors (ALS)
+title: VEML3235, VEML3328, VEML6030, VEML6035 and VEML7700 Ambient Light Sensors (ALS)
 
 maintainers:
   - Rishi Gupta <gupt21@gmail.com>
@@ -21,6 +21,7 @@ description: |
 
   Specifications about the sensors can be found at:
     https://www.vishay.com/docs/80131/veml3235.pdf
+    https://www.vishay.com/docs/84968/veml3328.pdf
     https://www.vishay.com/docs/84366/veml6030.pdf
     https://www.vishay.com/docs/84889/veml6035.pdf
     https://www.vishay.com/docs/84286/veml7700.pdf
@@ -29,6 +30,7 @@ properties:
   compatible:
     enum:
       - vishay,veml3235
+      - vishay,veml3328
       - vishay,veml6030
       - vishay,veml6035
       - vishay,veml7700
@@ -79,6 +81,7 @@ allOf:
         compatible:
           enum:
             - vishay,veml3235
+            - vishay,veml3328
             - vishay,veml7700
     then:
       properties:

-- 
2.54.0

[PATCH v4 2/2] iio: light: veml3328: add support for new device

[Joshua Crofts]

Add support for the Vishay VEML3328 RGB/IR light sensor communicating
via I2C (SMBus compatible).

Also add a new entry for said driver into Kconfig and Makefile.

Assisted-by: Gemini:3.1-Pro
Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
---
 MAINTAINERS                  |   5 +
 drivers/iio/light/Kconfig    |  11 ++
 drivers/iio/light/Makefile   |   1 +
 drivers/iio/light/veml3328.c | 422 +++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 439 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 9e9457c7bba6..a893a1a1181e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -28402,6 +28402,11 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/iio/light/vishay,veml6030.yaml
 F:	drivers/iio/light/veml3235.c
 
+VISHAY VEML3328 RGB IR LIGHT SENSOR DRIVER
+M:	Joshua Crofts <joshua.crofts1@gmail.com>
+S:	Maintained
+F:	drivers/iio/light/veml3328.c
+
 VISHAY VEML6030 AMBIENT LIGHT SENSOR DRIVER
 M:	Javier Carrasco <javier.carrasco.cruz@gmail.com>
 S:	Maintained
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index da4807a3fd3d..ef36824f312f 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -713,6 +713,17 @@ config VEML3235
 	  To compile this driver as a module, choose M here: the
 	  module will be called veml3235.
 
+config VEML3328
+	tristate "VEML3328 RGBCIR light sensor"
+	select REGMAP_I2C
+	depends on I2C
+	help
+	  Say Y here if you want to build a driver for the Vishay VEML3328
+	  RGB IR light sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called veml3328
+
 config VEML6030
 	tristate "VEML6030 and VEML6035 ambient light sensors"
 	select REGMAP_I2C
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index 39e62dfc10c7..64e354c49ed8 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_US5182D)		+= us5182d.o
 obj-$(CONFIG_VCNL4000)		+= vcnl4000.o
 obj-$(CONFIG_VCNL4035)		+= vcnl4035.o
 obj-$(CONFIG_VEML3235)		+= veml3235.o
+obj-$(CONFIG_VEML3328)		+= veml3328.o
 obj-$(CONFIG_VEML6030)		+= veml6030.o
 obj-$(CONFIG_VEML6040)		+= veml6040.o
 obj-$(CONFIG_VEML6046X00)	+= veml6046x00.o
diff --git a/drivers/iio/light/veml3328.c b/drivers/iio/light/veml3328.c
new file mode 100644
index 000000000000..7ff1753925c4
--- /dev/null
+++ b/drivers/iio/light/veml3328.c
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Vishay VEML3328 RGBCIR light sensor driver
+ *
+ * Copyright (c) 2026 Joshua Crofts <joshua.crofts1@gmail.com>
+ *
+ * Datasheet: https://www.vishay.com/docs/84968/veml3328.pdf
+ */
+
+#include <linux/array_size.h>
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/cleanup.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/time.h>
+#include <linux/types.h>
+
+#include <linux/iio/iio.h>
+
+#define VEML3328_REG_CONF		0x00
+#define VEML3328_REG_ID			0x0c
+#define VEML3328_REG_DATA_C		0x04
+#define VEML3328_REG_DATA_R		0x05
+#define VEML3328_REG_DATA_G		0x06
+#define VEML3328_REG_DATA_B		0x07
+#define VEML3328_REG_DATA_IR		0x08
+
+#define VEML3328_CONF_IT_MASK		GENMASK(5, 4)
+#define VEML3328_CONF_GAIN_MASK		GENMASK(11, 10)
+
+#define VEML3328_MAX_IT_TIME		(400 * USEC_PER_MSEC)
+
+#define VEML3328_ID_VAL			0x28
+
+#define VEML3328_SHUTDOWN		(BIT(0) | BIT(15))
+
+struct veml3328_data {
+	struct regmap *regmap;
+	/* Ensure read-modify-write sequences are not interrupted. */
+	struct mutex lock;
+};
+
+static const struct regmap_config veml3328_regmap_config = {
+	.name = "veml3328",
+	.reg_bits = 8,
+	.val_bits = 16,
+	.max_register = VEML3328_REG_ID,
+	.val_format_endian = REGMAP_ENDIAN_LITTLE,
+};
+
+#define VEML3328_CHAN_SPEC(_color, _addr) { \
+	.type = IIO_INTENSITY, \
+	.modified = 1, \
+	.channel2 = IIO_MOD_LIGHT_##_color, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+	.info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SCALE), \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME), \
+	.info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME), \
+	.address = _addr, \
+}
+
+static const struct iio_chan_spec veml3328_channels[] = {
+	{
+		.type = IIO_LIGHT,
+
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME),
+		.info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME),
+		.address = VEML3328_REG_DATA_G,
+	},
+	VEML3328_CHAN_SPEC(CLEAR, VEML3328_REG_DATA_C),
+	VEML3328_CHAN_SPEC(RED, VEML3328_REG_DATA_R),
+	VEML3328_CHAN_SPEC(GREEN, VEML3328_REG_DATA_G),
+	VEML3328_CHAN_SPEC(BLUE, VEML3328_REG_DATA_B),
+	VEML3328_CHAN_SPEC(IR, VEML3328_REG_DATA_IR),
+};
+
+/*
+ * Precomputed scale values (micro units).
+ * Formula for calculation: 0.384 * (50000 / IT_us) * (1 / Gain)
+ * Gain indexes: 0 (x0.5), 1 (x1), 2 (x2), 3 (x4)
+ * IT indexes: 0 (50ms), 1 (100ms), 2 (200ms), 3 (400ms)
+ */
+static const int veml3328_scale_vals[4][8] = {
+	{ 0, 768000, 0, 384000, 0, 192000, 0, 96000 },
+	{ 0, 384000, 0, 192000, 0, 96000,  0, 48000 },
+	{ 0, 192000, 0, 96000,  0, 48000,  0, 24000 },
+	{ 0, 96000,  0, 48000,  0, 24000,  0, 12000 },
+};
+
+/* integration times in microseconds */
+static const int veml3328_it_times[][2] = {
+	{ 0, 50 * USEC_PER_MSEC },
+	{ 0, 100 * USEC_PER_MSEC },
+	{ 0, 200 * USEC_PER_MSEC },
+	{ 0, 400 * USEC_PER_MSEC },
+};
+
+static int veml3328_power_down(struct veml3328_data *data)
+{
+	return regmap_set_bits(data->regmap, VEML3328_REG_CONF,
+			       VEML3328_SHUTDOWN);
+}
+
+static int veml3328_power_up(struct veml3328_data *data)
+{
+	int ret;
+
+	ret = regmap_clear_bits(data->regmap, VEML3328_REG_CONF,
+				VEML3328_SHUTDOWN);
+	if (ret)
+		return ret;
+
+	/*
+	 * Sleep for maximum integration time to ensure sensor is powered on
+	 * correctly.
+	 */
+	fsleep(VEML3328_MAX_IT_TIME);
+
+	return 0;
+}
+
+static void veml3328_power_down_action(void *data)
+{
+	veml3328_power_down(data);
+}
+
+static int veml3328_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int *val, int *val2, long mask)
+{
+	struct veml3328_data *data = iio_priv(indio_dev);
+	struct regmap *regmap = data->regmap;
+	struct device *dev = regmap_get_device(regmap);
+	unsigned int reg_val;
+	int it_inx, gain_inx;
+	int ret;
+
+	PM_RUNTIME_ACQUIRE_IF_ENABLED_AUTOSUSPEND(dev, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
+		return ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = regmap_read(regmap, chan->address, &reg_val);
+		if (ret)
+			return ret;
+
+		*val = reg_val;
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_INT_TIME:
+		ret = regmap_read(regmap, VEML3328_REG_CONF, &reg_val);
+		if (ret)
+			return ret;
+
+		it_inx = FIELD_GET(VEML3328_CONF_IT_MASK, reg_val);
+		if (it_inx >= ARRAY_SIZE(veml3328_it_times))
+			return -EINVAL;
+
+		*val = veml3328_it_times[it_inx][0];
+		*val2 = veml3328_it_times[it_inx][1];
+		return IIO_VAL_INT_PLUS_MICRO;
+
+	case IIO_CHAN_INFO_SCALE:
+		ret = regmap_read(regmap, VEML3328_REG_CONF, &reg_val);
+		if (ret)
+			return ret;
+
+		it_inx = FIELD_GET(VEML3328_CONF_IT_MASK, reg_val);
+		gain_inx = FIELD_GET(VEML3328_CONF_GAIN_MASK, reg_val);
+
+		if (it_inx >= ARRAY_SIZE(veml3328_it_times) || gain_inx >= 4)
+			return -EINVAL;
+
+		/* Stride by 2 through the flattened array to match (val, val2) */
+		*val = veml3328_scale_vals[it_inx][gain_inx * 2];
+		*val2 = veml3328_scale_vals[it_inx][gain_inx * 2 + 1];
+
+		return IIO_VAL_INT_PLUS_MICRO;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int veml3328_read_avail(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       const int **vals, int *type, int *length,
+			       long mask)
+{
+	struct veml3328_data *data = iio_priv(indio_dev);
+	struct regmap *regmap = data->regmap;
+	struct device *dev = regmap_get_device(data->regmap);
+	unsigned int reg_val;
+	int ret, it_inx;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_INT_TIME:
+		*length = ARRAY_SIZE(veml3328_it_times) * 2;
+		*vals = (const int *)veml3328_it_times;
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		return IIO_AVAIL_LIST;
+
+	case IIO_CHAN_INFO_SCALE: {
+		PM_RUNTIME_ACQUIRE_IF_ENABLED_AUTOSUSPEND(dev, pm);
+		ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+		if (ret)
+			return ret;
+
+		ret = regmap_read(regmap, VEML3328_REG_CONF, &reg_val);
+		if (ret)
+			return ret;
+
+		it_inx = FIELD_GET(VEML3328_CONF_IT_MASK, reg_val);
+		if (it_inx >= ARRAY_SIZE(veml3328_it_times))
+			return -EINVAL;
+
+		*length = 8;
+		*vals = (const int *)veml3328_scale_vals[it_inx];
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		return IIO_AVAIL_LIST;
+	}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int veml3328_write_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int val, int val2, long mask)
+{
+	struct veml3328_data *data = iio_priv(indio_dev);
+	struct regmap *regmap = data->regmap;
+	struct device *dev = regmap_get_device(regmap);
+	unsigned int reg_val;
+	int i, it_inx;
+	int ret;
+
+	PM_RUNTIME_ACQUIRE_IF_ENABLED_AUTOSUSPEND(dev, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
+		return ret;
+
+	guard(mutex)(&data->lock);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_INT_TIME:
+		if (val != 0)
+			return -EINVAL;
+
+		for (i = 0; i < ARRAY_SIZE(veml3328_it_times); i++) {
+			if (veml3328_it_times[i][1] == val2)
+				break;
+		}
+
+		if (i == ARRAY_SIZE(veml3328_it_times))
+			return -EINVAL;
+
+		return regmap_update_bits(regmap, VEML3328_REG_CONF,
+					  VEML3328_CONF_IT_MASK,
+					  FIELD_PREP(VEML3328_CONF_IT_MASK, i));
+
+	case IIO_CHAN_INFO_SCALE:
+		ret = regmap_read(regmap, VEML3328_REG_CONF, &reg_val);
+		if (ret)
+			return ret;
+
+		it_inx = FIELD_GET(VEML3328_CONF_IT_MASK, reg_val);
+		if (it_inx >= ARRAY_SIZE(veml3328_it_times))
+			return -EINVAL;
+
+		for (i = 0; i < 4; i++) {
+			if (val == veml3328_scale_vals[it_inx][i * 2] &&
+			    val2 == veml3328_scale_vals[it_inx][i * 2 + 1])
+				break;
+		}
+
+		if (i == 4)
+			return -EINVAL;
+
+		return regmap_update_bits(regmap, VEML3328_REG_CONF,
+					  VEML3328_CONF_GAIN_MASK,
+					  FIELD_PREP(VEML3328_CONF_GAIN_MASK, i));
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info veml3328_info = {
+	.read_raw = veml3328_read_raw,
+	.write_raw = veml3328_write_raw,
+	.read_avail = veml3328_read_avail,
+};
+
+static int veml3328_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct veml3328_data *data;
+	struct iio_dev *indio_dev;
+	unsigned int reg_val;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+
+	data->regmap = devm_regmap_init_i2c(client, &veml3328_regmap_config);
+	if (IS_ERR(data->regmap))
+		return dev_err_probe(dev, PTR_ERR(data->regmap),
+				     "Failed to initialize regmap\n");
+
+	ret = devm_mutex_init(dev, &data->lock);
+	if (ret)
+		return ret;
+
+	ret = devm_regulator_get_enable(dev, "vdd");
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to enable regulator\n");
+
+	ret = regmap_read(data->regmap, VEML3328_REG_ID, &reg_val);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to read ID register\n");
+
+	if ((reg_val & 0xff) != VEML3328_ID_VAL)
+		dev_warn(dev, "Unknown device ID: 0x%02x\n", reg_val & 0xff);
+
+	ret = veml3328_power_up(data);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to power on sensor\n");
+
+	ret = devm_add_action_or_reset(dev, veml3328_power_down_action, data);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to register teardown\n");
+
+	indio_dev->name = "veml3328";
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &veml3328_info;
+	indio_dev->channels = veml3328_channels;
+	indio_dev->num_channels = ARRAY_SIZE(veml3328_channels);
+
+	pm_runtime_set_active(dev);
+	pm_runtime_set_autosuspend_delay(dev, 2000);
+	pm_runtime_use_autosuspend(dev);
+
+	ret = devm_pm_runtime_enable(dev);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to enable runtime PM\n");
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static int veml3328_runtime_suspend(struct device *dev)
+{
+	struct veml3328_data *data = iio_priv(dev_get_drvdata(dev));
+	int ret;
+
+	ret = veml3328_power_down(data);
+	if (ret)
+		dev_err(dev, "Failed to suspend: %d\n", ret);
+
+	return ret;
+}
+
+static int veml3328_runtime_resume(struct device *dev)
+{
+	struct veml3328_data *data = iio_priv(dev_get_drvdata(dev));
+	int ret;
+
+	ret = veml3328_power_up(data);
+	if (ret)
+		dev_err(dev, "Failed to resume: %d\n", ret);
+
+	return ret;
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(veml3328_pm_ops,
+				 veml3328_runtime_suspend,
+				 veml3328_runtime_resume,
+				 NULL);
+
+static const struct of_device_id veml3328_of_match[] = {
+	{ .compatible = "vishay,veml3328" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, veml3328_of_match);
+
+static const struct i2c_device_id veml3328_id[] = {
+	{ .name = "veml3328" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, veml3328_id);
+
+static struct i2c_driver veml3328_driver = {
+	.driver = {
+		.name = "veml3328",
+		.of_match_table = veml3328_of_match,
+		.pm = pm_ptr(&veml3328_pm_ops),
+	},
+	.probe = veml3328_probe,
+	.id_table = veml3328_id,
+};
+module_i2c_driver(veml3328_driver);
+
+MODULE_AUTHOR("Joshua Crofts <joshua.crofts1@gmail.com>");
+MODULE_DESCRIPTION("VEML3328 RGBCIR Light Sensor");
+MODULE_LICENSE("GPL");

-- 
2.54.0

Re: [PATCH v4 2/2] iio: light: veml3328: add support for new device

[Javier Carrasco]

Hi Joshua,

Just a nitpick I caught on the fly because it was missing in a driver I
recently sent as well.

On Sun May 31, 2026 at 6:56 PM CEST, Joshua Crofts wrote:
> Add support for the Vishay VEML3328 RGB/IR light sensor communicating
> via I2C (SMBus compatible).
>
> Also add a new entry for said driver into Kconfig and Makefile.
>
> Assisted-by: Gemini:3.1-Pro
> Signed-off-by: Joshua Crofts <joshua.crofts1@gmail.com>
> ---
>  MAINTAINERS                  |   5 +
>  drivers/iio/light/Kconfig    |  11 ++
>  drivers/iio/light/Makefile   |   1 +
>  drivers/iio/light/veml3328.c | 422 +++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 439 insertions(+)
>
> +++ b/drivers/iio/light/veml3328.c
> @@ -0,0 +1,422 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Vishay VEML3328 RGBCIR light sensor driver
> + *
> + * Copyright (c) 2026 Joshua Crofts <joshua.crofts1@gmail.com>
> + *
> + * Datasheet: https://www.vishay.com/docs/84968/veml3328.pdf
> + */
> +
> +#include <linux/array_size.h>
> +#include <linux/bitfield.h>
> +#include <linux/bits.h>
> +#include <linux/cleanup.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>

At least linux/mod_devicetable.h is missing to include of_device_id.
Probably that's the only missing header, and it could be added without
sending a new version, but that is not for me to decide :)

> +#include <linux/mutex.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/time.h>
> +#include <linux/types.h>
> +
> +#include <linux/iio/iio.h>
> +

Best regards,
Javier

Re: [PATCH v4 2/2] iio: light: veml3328: add support for new device

[Joshua Crofts]

On Sun, 31 May 2026 at 21:26, Javier Carrasco
<javier.carrasco.cruz@gmail.com> wrote:
>
> Hi Joshua,
>
> Just a nitpick I caught on the fly because it was missing in a driver I
> recently sent as well.
>
> At least linux/mod_devicetable.h is missing to include of_device_id.
> Probably that's the only missing header, and it could be added without
> sending a new version, but that is not for me to decide :)

Hi Javier,

Good catch, I completely forgot about mod_devicetable!

Thanks!

-- 
Kind regards

CJD

Re: [PATCH v4 2/2] iio: light: veml3328: add support for new device

[Jonathan Cameron]

On Mon, 1 Jun 2026 08:56:17 +0200
Joshua Crofts <joshua.crofts1@gmail.com> wrote:

> On Sun, 31 May 2026 at 21:26, Javier Carrasco
> <javier.carrasco.cruz@gmail.com> wrote:
> >
> > Hi Joshua,
> >
> > Just a nitpick I caught on the fly because it was missing in a driver I
> > recently sent as well.
> >
> > At least linux/mod_devicetable.h is missing to include of_device_id.
> > Probably that's the only missing header, and it could be added without
> > sending a new version, but that is not for me to decide :)  
> 
> Hi Javier,
> 
> Good catch, I completely forgot about mod_devicetable!

Tweaked.

Applied to the testing branch of iio.git.

Thanks,

Jonathan

> 
> Thanks!
>