* [PULL] 1st set of new device support, features and cleanup for IIO in the 5.17 cycle.
@ 2021-12-21 15:33 Jonathan Cameron
2021-12-22 11:34 ` Greg KH
0 siblings, 1 reply; 2+ messages in thread
From: Jonathan Cameron @ 2021-12-21 15:33 UTC (permalink / raw)
To: gregkh, linux-iio
The following changes since commit fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf:
Linux 5.16-rc1 (2021-11-14 13:56:52 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.17a
for you to fetch changes up to c9791a94384af07592d29504004d2255dbaf8663:
iio: adc: ti-adc081c: Partial revert of removal of ACPI IDs (2021-12-21 15:13:29 +0000)
----------------------------------------------------------------
1st set of IIO new device support, features and cleanup for 5.17
Includes some fixes that were either late breaking, low priority or
complex enough to not be good to rush in late in the cycle.
Tree rebased today to fix up some trivial issues + pull in a fix that
was previously on the fixes-togreg branch. Vast majority have been
in linux-next for some time now.
New device support
* adi,ad7293
- New driver and bindings for this Power Amplifier drain current
controller. A complex device with various related monitoring functions.
* adi,ad75513R
- New driver and bindings for this combined ADC and DAC device.
- A few follow up fixes.
* adi,admv8818
- New driver (and type) for this 2-18GHz filter device. Includes
bindings and ABI documentation to allow clk_notifier based auto
adjustment of the filters in appropriate applications.
* liteon,ltr501
- Support for the ltr303. ID and chip specific info table.
* xilinx,ams
- New generic firmware function fwnode_iomap() as used in this driver.
- New driver and bindings for this ADC and on-chip sensors as found
in various Xilinx devices.
Core
* Introduced IIO_VAL_INT_64 which uses val and val2 in IIO callbacks to
form a 64 bit integer when higher precision needed.
* Allow IIO_ENUM_AVAILABLE to be used with different shared values.
* Fix a long term issue with scheduling whilst atomic when iio_trig_poll()
is called but no trigger consumers are actually enabled and hence the
trigger may be reenabled from the interrupt handler. Seen in the wild
on the tsc2046.
* Mark iio_device_type const.
* buffer: Use a separate index variable to simplify code.
* buffer-dma: Clear out unused struct iio_buffer_block
* buffer-dmaengine: Switch to cheaper round_down() as power of 2 values.
Tests/tools
* format_value
- Check against NULL returns from allocations in tests.
- Add IIO_VAL_INT_64 test case.
* event_monitor
- Flush the output after event to given more consistent latency
when tool output piped to other programs.
Driver Features
* axp20x
- Add support for NTC thermistor channel and document TS pin binding.
* arm,scmi
- Add reading of raw channel values (using IIO_VAL_INT_64)
* liteon,ltr501
- Add proximity-near-level support and dt-binding.
Tree wide cleanup
* Remove no-op trigger ops from multiple drivers.
* Stop using dev_get_drvdata() on the iio_dev->dev in various drivers
and then stop assigning it to allow this to be used for other purposes.
We can always get to the indio_dev using dev_to_iio_dev() which is
a container_of() based approach. Also cleanup up some related unnecessary
convoluted cases.
- atmel,at91-sam5d2
- nxp,imx7d
- meas,ms5611
- st,st_sensors
* Where available (or easy to introduce) use the scan_type.* values
in place of a second copy for read_raw and similar paths.
- adi,ad7266
- bosch,bma220
- fsl,mac3110
- fsl,mma7455
- fsl,mpl3115
- kionix,kcjk-1013
- sensortek,stk8ba50
- sensortek,stk8312
- ti,adc12138
- ti,ads1015
- vti,sca3000
- xilinx,xadc-core
* Switch drives over to generic firmware properties including appropriate
header changes to avoid including of.h
- Various DACs had false CONFIG_OF dependencies.
- dpot-dac
- envelope-detector
- adi,ad5755
- adi,ad5758
- capella,cm3605
- maxim,max9611
- microchip,mcp41010
- microchip,mcp3911
- ti,adc12138
* Trivial clang warning fixes for W=1 warnings.
Driver specific cleanup and minor fixes
* adi,ad7606
- Comment fixes.
* ams,ad3935
- Drop pointless cast to the same type.
* atmel,at91-sama5d2
- Fix wrong cast of iio_dev->dev to platform_device that happened to
be harmless.
* fsl,mma7660
- Stop i2c remove() function returning an error code. Part of a rework
to eventually stop returning anything from these.
* fsl,mma8452
- Use correct type for local irqreturn_t.
* nxp,imx8mq
- Maintainer email address update.
* nxp,lpc18xx_adc
- Ensure clk_prepare_enable() called before clk_get_rate().
- Switch of.h for mod_devicetable.h to reflect no of specific functions,
just the id table.
* renesas,rzg2l
- Drop a dev_err() that just duplicates error printed in platform_get_irq()
* sgx,vz89x
- Drop pointless cast.
* st,lsm6dsx
- Make it possible to disable the sensorhub from DT to avoid a corner
case where the address of a slave device many be accidentally modified.
* st,stm32-adc
- Stop leaking an of_node in an error path.
* st,stmp2
- Avoid wrong sized type for bit field which could result in
over-reading (harmless). Precursor to enabling -Warray-bounds.
* ti,adc081c
- Put back some ACPI support for non standards compliant ADC081C
ID because it is known to be in the wild on some Aaeon boards.
* ti,ads8688
- Cleanup redundant local ret variable assignment.
* ti,ina2xx-adc
- Use helper macro kthread_run() to replace some boilerplate.
- Avoid double reference counting.
- Drop pointless cast.
* xilinx,xadc
- Make the IRQ optional as not always wired to the host system.
----------------------------------------------------------------
Anand Ashok Dumbre (4):
device property: Add fwnode_iomap()
iio: adc: Add Xilinx AMS driver
dt-bindings: iio: adc: Add Xilinx AMS binding documentation
MAINTAINERS: Add maintainer for xilinx-ams
Andriy Tryshnivskyy (4):
iio: core: Introduce IIO_VAL_INT_64.
iio/scmi: Add reading "raw" attribute.
iio: test: Add check against NULL for buffer in tests.
iio: test: Add test for IIO_VAL_INT_64.
André Gustavo Nakagomi Lopez (1):
iio: adc: lpc18xx_adc: Reorder clk_get_rate() function call
Andy Shevchenko (1):
iio: buffer: Use dedicated variable in iio_buffers_alloc_sysfs_and_mask()
Antoniu Miclaus (7):
iio: expose shared parameter in IIO_ENUM_AVAILABLE
iio:dac:ad7293: add support for AD7293
dt-bindings:iio:dac: add ad7293 doc
iio: add filter subfolder
iio:filter:admv8818: add support for ADMV8818
dt-bindings:iio:filter: add admv8818 doc
iio:filter:admv8818: Add sysfs ABI documentation
Cai Huoqing (3):
iio: adc: ina2xx: Make use of the helper macro kthread_run()
iio: adc: ina2xx: Avoid double reference counting from get_task_struct/put_task_struct()
MAINTAINERS: Update i.MX 8QXP ADC info
Cosmin Tanislav (3):
iio: add addac subdirectory
dt-bindings: iio: add AD74413R
iio: addac: add AD74413R driver
Dan Carpenter (1):
iio: addac: ad74413r: fix off by one in ad74413r_parse_channel_config()
Evgeny Boger (2):
iio:adc:axp20x: add support for NTC thermistor
dt-bindings: iio: adc: document TS voltage in AXP PMICs
Gwendal Grignou (12):
iio: bma220: Use scan_type when processing raw data
iio: kxcjk-1013: Use scan_type when processing raw data
iio: mma7455: Use scan_type when processing raw data
iio: sca3000: Use scan_type when processing raw data
iio: stk8312: Use scan_type when processing raw data
iio: stk8ba50: Use scan_type when processing raw data
iio: ad7266: Use scan_type when processing raw data
iio: ti-adc12138: Use scan_type when processing raw data
iio: mag3110: Use scan_type when processing raw data
iio: ti-ads1015: Remove shift variable ads1015_read_raw
iio: xilinx-xadc-core: Use local variable in xadc_read_raw
iio: mpl3115: Use scan_type.shift and realbit in mpl3115_read_raw
Jonathan Cameron (28):
iio: trigger: Fix a scheduling whilst atomic issue seen on tsc2046
iio:dac:ad5755: Switch to generic firmware properties and drop pdata
iio:dac:ad5758: Drop unused of specific headers.
iio:dac:dpot-dac: Swap of.h for mod_devicetable.h
iio:dac:lpc18xx_dac: Swap from of* to mod_devicetable.h
iio:pot:mcp41010: Switch to generic firmware properties.
iio:light:cm3605: Switch to generic firmware properties.
iio:adc:max9611: Switch to generic firmware properties.
iio:adc:mcp3911: Switch to generic firmware properties.
iio:adc:ti-adc12138: Switch to generic firmware properties and drop of_match_ptr
iio:adc:envelope-detector: Switch from of headers to mod_devicetable.h
iio:adc:ti-ads124s08: Drop dependency on OF.
iio:adc/dac:Kconfig: Update to drop OF dependencies.
dt-bindings: iio: dac: adi,ad5755: drop unrelated included.
iio:accel:bma180: Suppress clang W=1 warning about pointer to enum conversion.
iio:adc:ina2xx-adc: Suppress clang W=1 warning about pointer to enum conversion.
iio:adc:rcar: Suppress clang W=1 warning about pointer to enum conversion.
iio:adc:ti-ads1015: Suppress clang W=1 warning about pointer to enum conversion.
iio:amplifiers:hmc425a: Suppress clang W=1 warning about pointer to enum conversion.
iio:dac:mcp4725: Suppress clang W=1 warning about pointer to enum conversion.
iio:imu:inv_icm42600: Suppress clang W=1 warning about pointer to enum conversion.
iio:imu:inv_mpu6050: Suppress clang W=1 warning about pointer to enum conversion.
iio:magn:ak8975: Suppress clang W=1 warning about pointer to enum conversion.
iio:dummy: Drop set but unused variable len.
iio:accel:bmc150: Mark structure __maybe_unused as only needed with for pm ops.
iio:accel:kxcjk-1013: Mark struct __maybe_unused to avoid warning.
iio:addac:ad74413r: Fix uninitialized ret in a path that won't be hit.
iio: adc: ti-adc081c: Partial revert of removal of ACPI IDs
Kees Cook (1):
iio: stmpe-adc: Use correctly sized arguments for bit field
Lars-Peter Clausen (21):
iio: xilinx-xadc: Make IRQ optional
iio: st-sensors: Use dev_to_iio_dev() in sysfs callbacks
iio: imx7d_adc: Don't pass IIO device to imx7d_adc_{enable,disable}()
iio: ms5611: Simplify IO callback parameters
iio: Mark iio_device_type as const
iio: interrupt-trigger: Remove no-op trigger ops
iio: sysfs-trigger: Remove no-op trigger ops
iio: ad_sigma_delta: Remove no-op trigger ops
iio: afe4403: Remove no-op trigger ops
iio: afe4404: Remove no-op trigger ops
iio: as3935: Remove no-op trigger ops
iio: atlas-sensor: Remove no-op trigger ops
iio: gp2ap020a00f: Remove no-op trigger ops
iio: lmp91000: Remove no-op trigger ops
iio: mma8452: Use correct type for return variable in IRQ handler
iio: at91-sama5d2: Fix incorrect cast to platform_device
iio: at91-sama5d2: Use dev_to_iio_dev() in sysfs callbacks
iio: iio_device_alloc(): Remove unnecessary self drvdata
iio: as3935: Remove unnecessary cast
iio: in2xx-adc: Remove unnecessary cast
iio: vz89x: Remove unnecessary cast
Lorenzo Bianconi (2):
iio: imu: st_lsm6dsx: add dts property to disable sensor-hub
Documentation: dt: iio: st_lsm6dsx: add disable-sensor-hub property
Maslov Dmitry (1):
iio: light: ltr501: Added ltr303 driver support
Mihail Chindris (2):
dt-bindings: iio: dac: Add adi,ad3552r.yaml
drivers:iio:dac: Add AD3552R driver support
Minghao Chi (1):
iio:adc:ti-ads8688:: remove redundant ret variable
Nikita Travkin (2):
dt-bindings: iio: light: ltr501: Add proximity-near-level
iio: ltr501: Export near level property for proximity sensor
Paul Cercueil (2):
iio: buffer-dma: Remove unused iio_buffer_block struct
iio: buffer-dma: Use round_down() instead of rounddown()
Uwe Kleine-König (1):
iio: accel: mma7660: Warn about failure to put device in stand-by in .remove()
Wan Jiabing (1):
iio: adc: stm32-adc: Fix of_node_put() issue in stm32-adc
Xiang wangx (1):
iio: adc: ad7606: Fix syntax errors in comments
Xu Wang (1):
iio: adc: rzg2l_adc: Remove unnecessary print function dev_err()
Zach DeCook (1):
iio: event_monitor: Flush output on event
.../ABI/testing/sysfs-bus-iio-filter-admv8818 | 16 +
.../bindings/iio/adc/x-powers,axp209-adc.yaml | 3 +
.../bindings/iio/adc/xlnx,zynqmp-ams.yaml | 227 +++
.../bindings/iio/addac/adi,ad74413r.yaml | 158 +++
.../devicetree/bindings/iio/dac/adi,ad3552r.yaml | 217 +++
.../devicetree/bindings/iio/dac/adi,ad5755.yaml | 1 -
.../devicetree/bindings/iio/dac/adi,ad7293.yaml | 61 +
.../bindings/iio/filter/adi,admv8818.yaml | 66 +
.../devicetree/bindings/iio/imu/st,lsm6dsx.yaml | 7 +
.../bindings/iio/light/liteon,ltr501.yaml | 7 +
MAINTAINERS | 20 +-
drivers/base/property.c | 16 +
drivers/iio/Kconfig | 2 +
drivers/iio/Makefile | 2 +
drivers/iio/accel/bma180.c | 4 +-
drivers/iio/accel/bma220_spi.c | 6 +-
drivers/iio/accel/bmc150-accel-core.c | 2 +-
drivers/iio/accel/kxcjk-1013.c | 5 +-
drivers/iio/accel/mma7455_core.c | 3 +-
drivers/iio/accel/mma7660.c | 8 +-
drivers/iio/accel/mma8452.c | 2 +-
drivers/iio/accel/mma9553.c | 2 +-
drivers/iio/accel/sca3000.c | 17 +-
drivers/iio/accel/stk8312.c | 2 +-
drivers/iio/accel/stk8ba50.c | 3 +-
drivers/iio/adc/Kconfig | 21 +-
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/ad7192.c | 3 +-
drivers/iio/adc/ad7266.c | 3 +-
drivers/iio/adc/ad7606.h | 2 +-
drivers/iio/adc/ad_sigma_delta.c | 4 -
drivers/iio/adc/at91-sama5d2_adc.c | 38 +-
drivers/iio/adc/axp20x_adc.c | 45 +-
drivers/iio/adc/envelope-detector.c | 3 +-
drivers/iio/adc/hi8435.c | 2 +-
drivers/iio/adc/imx7d_adc.c | 5 +-
drivers/iio/adc/ina2xx-adc.c | 15 +-
drivers/iio/adc/lpc18xx_adc.c | 6 +-
drivers/iio/adc/max9611.c | 20 +-
drivers/iio/adc/mcp3911.c | 9 +-
drivers/iio/adc/rcar-gyroadc.c | 3 +-
drivers/iio/adc/rzg2l_adc.c | 4 +-
drivers/iio/adc/stm32-adc.c | 3 +-
drivers/iio/adc/stmpe-adc.c | 5 +-
drivers/iio/adc/ti-adc081c.c | 22 +-
drivers/iio/adc/ti-adc12138.c | 14 +-
drivers/iio/adc/ti-ads1015.c | 10 +-
drivers/iio/adc/ti-ads124s08.c | 3 +-
drivers/iio/adc/ti-ads8688.c | 4 +-
drivers/iio/adc/xilinx-ams.c | 1451 +++++++++++++++++++
drivers/iio/adc/xilinx-xadc-core.c | 64 +-
drivers/iio/addac/Kconfig | 20 +
drivers/iio/addac/Makefile | 7 +
drivers/iio/addac/ad74413r.c | 1475 ++++++++++++++++++++
drivers/iio/amplifiers/hmc425a.c | 2 +-
drivers/iio/buffer/industrialio-buffer-dmaengine.c | 2 +-
drivers/iio/chemical/atlas-sensor.c | 4 -
drivers/iio/chemical/vz89x.c | 2 +-
drivers/iio/common/scmi_sensors/scmi_iio.c | 57 +-
drivers/iio/common/st_sensors/st_sensors_core.c | 4 +-
drivers/iio/dac/Kconfig | 22 +-
drivers/iio/dac/Makefile | 2 +
drivers/iio/dac/ad3552r.c | 1138 +++++++++++++++
drivers/iio/dac/ad5064.c | 4 +-
drivers/iio/dac/ad5380.c | 2 +-
drivers/iio/dac/ad5446.c | 2 +-
drivers/iio/dac/ad5504.c | 2 +-
drivers/iio/dac/ad5624r_spi.c | 2 +-
drivers/iio/dac/ad5686.c | 2 +-
drivers/iio/dac/ad5755.c | 152 +-
drivers/iio/dac/ad5758.c | 3 +-
drivers/iio/dac/ad5766.c | 13 +-
drivers/iio/dac/ad5791.c | 2 +-
drivers/iio/dac/ad7293.c | 934 +++++++++++++
drivers/iio/dac/dpot-dac.c | 2 +-
drivers/iio/dac/lpc18xx_dac.c | 3 +-
drivers/iio/dac/max5821.c | 2 +-
drivers/iio/dac/mcp4725.c | 10 +-
drivers/iio/dac/stm32-dac.c | 2 +-
drivers/iio/dac/ti-dac082s085.c | 2 +-
drivers/iio/dac/ti-dac5571.c | 2 +-
drivers/iio/dac/ti-dac7311.c | 2 +-
drivers/iio/dummy/iio_simple_dummy_buffer.c | 2 -
drivers/iio/filter/Kconfig | 18 +
drivers/iio/filter/Makefile | 7 +
drivers/iio/filter/admv8818.c | 665 +++++++++
drivers/iio/health/afe4403.c | 5 -
drivers/iio/health/afe4404.c | 5 -
drivers/iio/iio_core.h | 2 +-
drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c | 2 +-
drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c | 2 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 2 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c | 2 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 4 +-
drivers/iio/industrialio-buffer.c | 20 +-
drivers/iio/industrialio-core.c | 6 +-
drivers/iio/industrialio-trigger.c | 36 +-
drivers/iio/light/cm3605.c | 6 +-
drivers/iio/light/gp2ap020a00f.c | 5 -
drivers/iio/light/ltr501.c | 42 +-
drivers/iio/magnetometer/ak8975.c | 2 +-
drivers/iio/magnetometer/hmc5843_core.c | 4 +-
drivers/iio/magnetometer/mag3110.c | 6 +-
drivers/iio/potentiometer/mcp41010.c | 6 +-
drivers/iio/potentiostat/lmp91000.c | 4 -
drivers/iio/pressure/mpl3115.c | 16 +-
drivers/iio/pressure/ms5611.h | 6 +-
drivers/iio/pressure/ms5611_core.c | 7 +-
drivers/iio/pressure/ms5611_i2c.c | 11 +-
drivers/iio/pressure/ms5611_spi.c | 17 +-
drivers/iio/proximity/as3935.c | 6 +-
drivers/iio/test/iio-test-format.c | 123 +-
drivers/iio/trigger/iio-trig-interrupt.c | 4 -
drivers/iio/trigger/iio-trig-sysfs.c | 4 -
drivers/iio/trigger/stm32-timer-trigger.c | 4 +-
include/dt-bindings/iio/addac/adi,ad74413r.h | 21 +
include/linux/iio/buffer-dma.h | 5 -
include/linux/iio/iio.h | 5 +-
include/linux/iio/trigger.h | 2 +
include/linux/iio/types.h | 1 +
include/linux/platform_data/ad5755.h | 102 --
include/linux/property.h | 2 +
tools/iio/iio_event_monitor.c | 1 +
123 files changed, 7226 insertions(+), 459 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818
create mode 100644 Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
create mode 100644 Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml
create mode 100644 Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml
create mode 100644 drivers/iio/adc/xilinx-ams.c
create mode 100644 drivers/iio/addac/Kconfig
create mode 100644 drivers/iio/addac/Makefile
create mode 100644 drivers/iio/addac/ad74413r.c
create mode 100644 drivers/iio/dac/ad3552r.c
create mode 100644 drivers/iio/dac/ad7293.c
create mode 100644 drivers/iio/filter/Kconfig
create mode 100644 drivers/iio/filter/Makefile
create mode 100644 drivers/iio/filter/admv8818.c
create mode 100644 include/dt-bindings/iio/addac/adi,ad74413r.h
delete mode 100644 include/linux/platform_data/ad5755.h
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PULL] 1st set of new device support, features and cleanup for IIO in the 5.17 cycle.
2021-12-21 15:33 [PULL] 1st set of new device support, features and cleanup for IIO in the 5.17 cycle Jonathan Cameron
@ 2021-12-22 11:34 ` Greg KH
0 siblings, 0 replies; 2+ messages in thread
From: Greg KH @ 2021-12-22 11:34 UTC (permalink / raw)
To: Jonathan Cameron; +Cc: linux-iio
On Tue, Dec 21, 2021 at 03:33:33PM +0000, Jonathan Cameron wrote:
> The following changes since commit fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf:
>
> Linux 5.16-rc1 (2021-11-14 13:56:52 -0800)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.17a
Pulled and pushed out, thanks.
greg k-h
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-12-22 11:36 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-12-21 15:33 [PULL] 1st set of new device support, features and cleanup for IIO in the 5.17 cycle Jonathan Cameron
2021-12-22 11:34 ` Greg KH
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox