* [PULL] IIO: 1st set of new device support, cleanup and features for the 6.1 cycle.
@ 2022-09-17 13:03 Jonathan Cameron
2022-09-21 14:09 ` Greg KH
0 siblings, 1 reply; 2+ messages in thread
From: Jonathan Cameron @ 2022-09-17 13:03 UTC (permalink / raw)
To: gregkh, linux-iio
The following changes since commit 568035b01cfb107af8d2e4bd2fb9aea22cf5b868:
Linux 6.0-rc1 (2022-08-14 15:50:18 -0700)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-6.1a
for you to fetch changes up to 2f61ff8272967c9bdcba810aa978170814b08f7c:
iio: pressure: icp10100: Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS(). (2022-09-05 18:08:42 +0100)
----------------------------------------------------------------
1st set of IIO new device support, features and cleanup for 6.1
This includes Nuno Sa's work to move the IIO core over to generic firmware
properties rather than having DT specific code paths. Combined with Andy
Shevchenko's long term work on drivers, this leaves IIO in a good state for
handling other firmware types.
New device support
- liteon,ltrf216a
* New driver and dt bindings to support this Light sensor.
- maxim,max11205
* New driver for this 16bit single channel ADC.
- memsensing,msa311
* New driver for this accelerometer. Includes a string helper for read/write.
- richtek,rtq6056
* New driver and dt binding to support this current monitor used to measure
power usage.
- yamaha,yas530
* Support the YAS537 variant (series includes several fixes for other parts
and new driver features).
Staging graduation
- adi,ad7746 CDC. Cleanup conducted against set of roadtest tests using
the posted RFC of that framework.
Features
- core
* Large rework to make all the core IIO code use generic firmware properties.
Includes switching some drivers over as well using newly provided
generic interfaces and allowing removal of DT specific ones.
* Support for gesture event types for single and double tap. Used in
bosch,bma400.
- atmel,at91-sama5d2
* Add support for temperature sensor which uses two muxed inputs to estimate
the temperature.
* Handle trackx bits of EMR register to improve temp sampling accuracy.
* Runtime PM support.
- liteon,ltrf216a
* Add a _raw channel output to allow working around an issue with
differing conversions equations that breaks some user space controls.
- mexelis,mlx90632
* Support regulator control.
- ti,tsc2046
* External reference voltage support.
Clean up and minor fixes
- Tree-wide
* devm_clk_get_enabled() replacements of opencoded equivalent.
* Remaining IIO_DMA_MINALIGN conversions (the staging/iio drivers).
* Various minor warning and similar cleanup such as missing static
markings.
* strlcpy() to strscpy() for cases where return value not checked.
* provide units.h entries for more HZ units and use them in drivers.
- dt-bindings cleanup
* Drop maintainers listss where the email address is bouncing.
* Switch spi devices over to using spi-peripheral.yaml
* Add some missing unevaluatedProperties / additionalProperties: false
entries.
- ABI docs
* Add some missing channel type specific sampling frequency entries.
* Add parameter names for callback parameters.
- MAINTAINERS
* Fix wrong ADI forum links.
- core
* lockdep class per device, to avoid an issue with nest when one IIO
device is the consumer of another.
* White space tweaks.
- asc,dlhl60d
* Use get_unaligned_be24 to avoid some unusual data manipulation and masking.
- atmel,at91-sama5d2
* Fix wrong max value.
* Improve error handling when measuring pressure and touch.
* Add locks to remove races on updating oversampling / sampling freq.
* Add missing calls in suspend and resume path to ensure state is correctly
brought up if buffered capture was in use when suspend happened.
* Error out of write_raw() callback if buffered capture enabled to avoid
unpredictable behavior.
* Handle different versions having different oversampling ratio support and
drop excess error checking.
* Cleanup magic value defines where the name is just the value and hence
hurts readability.
* Use read_avail() callback to provide info on possible oversampling ratios.
* Correctly handle variable bit depth when doing oversampling on different
supported parts. Also handle higher oversampling ratios.
- fsl,imx8qxp
* Don't ignore errors from regulator_get_voltage() so as to avoid some
very surprising scaling.
- invensense,icp10100
* Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS. UNIVERSAL rarely made
sense and is now deprecated. In this driver we just avoid double disabling
in some paths.
- maxim,max1363
* Drop consumer channel map provision by platform data. There have been
better ways of doing this for years and there are no in tree users.
- microchip,mcp3911
* Update status to maintained.
- qcom,spmi-adc5
* Support measurement of LDO output voltage.
- qcom,spmi-adc
* Add missing channel available on SM6125 SoC.
- st,stmpe
* Drop requirement on node name in binding now that driver correctly
doesn't enforce it.
- stx104
* Move to more appropriate addac directory
- ti,am335x
* Document ti,am654-adc compatible already in use in tree.
- ti,hmc5843
* Move dev_pm_ops out of header and use new pm macros to handle export.
- yamaha,yas530
* Minor cleanups.
----------------------------------------------------------------
Andy Shevchenko (5):
iio: pressure: dlhl60d: Don't take garbage into consideration when reading data
lib/string_helpers: Add str_read_write() helper
iio: magnetometer: yamaha-yas530: Use pointers as driver data
iio: magnetometer: yamaha-yas530: Make strings const in chip info
iio: magnetometer: yamaha-yas530: Use dev_err_probe()
Antoniu Miclaus (2):
iio: frequency: admv1014: return -EINVAL directly
MAINTAINERS: fix Analog Devices forum links
ChiYuan Huang (3):
dt-bindings: iio: adc: Add rtq6056 adc support
iio: adc: Add rtq6056 support
Documentation: ABI: testing: rtq6056: Update ABI docs
Claudiu Beznea (19):
iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAX
iio: adc: at91-sama5d2_adc: check return status for pressure and touch
iio: adc: at91-sama5d2_adc: lock around oversampling and sample freq
iio: adc: at91-sama5d2_adc: disable/prepare buffer on suspend/resume
iio: adc: at91-sama5d2_adc: exit from write_raw() when buffers are enabled
iio: adc: at91-sama5d2_adc: handle different EMR.OSR for different hw versions
iio: adc: at91-sama5d2_adc: move the check of oversampling in its function
iio: adc: at91-sama5d2_adc: drop AT91_OSR_XSAMPLES defines
iio: adc: at91-sama5d2_adc: add .read_avail() chan_info ops
iio: adc: at91-sama5d2_adc: adjust osr based on specific platform data
iio: adc: at91-sama5d2_adc: add 64 and 256 oversampling ratio
iio: adc: at91-sama5d2_adc: move oversampling storage in its function
iio: adc: at91-sama5d2_adc: update trackx on emr
iio: adc: at91-sama5d2_adc: add startup and tracktim as parameter for at91_adc_setup_samp_freq()
iio: adc: at91-sama5d2_adc: lock around at91_adc_read_info_raw()
dt-bindings: iio: adc: at91-sama5d2_adc: add id for temperature channel
iio: adc: at91-sama5d2_adc: add support for temperature sensor
iio: adc: at91-sama5d2_adc: add empty line after functions
iio: adc: at91-sama5d2_adc: add runtime pm support
Crt Mori (2):
iio: temperature: mlx90632 Add supply regulator to sensor
dt-bindings: iio: mlx90632 Add supply regulator documentation
Dmitry Rokosov (6):
units: complement the set of Hz units
iio: accel: adxl345: use HZ macro from units.h
iio: common: scmi_sensors: use HZ macro from units.h
dt-bindings: vendor-prefixes: add MEMSensing Microsystems Co., Ltd.
iio: add MEMSensing MSA311 3-axis accelerometer driver
dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver
Francesco Dolcini (1):
dt-bindings: iio: adc: stmpe: Remove node name requirement
Jagath Jog J (2):
iio: Add new event type gesture and use direction for single and double tap
iio: accel: bma400: Add support for single and double tap events
Jakob Hauser (14):
iio: magnetometer: yas530: Change data type of hard_offsets to signed
iio: magnetometer: yas530: Change range of data in volatile register
iio: magnetometer: yas530: Correct scaling of magnetic axes
iio: magnetometer: yas530: Correct temperature handling
iio: magnetometer: yas530: Change data type of calibration coefficients
iio: magnetometer: yas530: Rename functions and registers
iio: magnetometer: yas530: Move printk %*ph parameters out from stack
iio: magnetometer: yas530: Apply documentation and style fixes
iio: magnetometer: yas530: Introduce "chip_info" structure
iio: magnetometer: yas530: Add volatile registers to "chip_info"
iio: magnetometer: yas530: Add IIO scaling to "chip_info"
iio: magnetometer: yas530: Add temperature calculation to "chip_info"
iio: magnetometer: yas530: Add function pointers to "chip_info"
iio: magnetometer: yas530: Add YAS537 variant
Joe Simmons-Talbott (4):
iio: Add blank lines after declarations.
iio: Fix indentation for multiline conditional.
iio: Add names for function definition arguments.
iio: Avoid multiple line dereference for mask
Jonathan Cameron (26):
iio: ABI: Fix wrong format of differential capacitance channel ABI.
staging: iio: cdc: ad7746: Use explicit be24 handling.
staging: iio: cdc: ad7746: Push handling of supply voltage scale to userspace.
staging: iio: cdc: ad7746: Use local buffer for multi byte reads.
staging: iio: cdc: ad7746: Factor out ad7746_read_channel()
staging: iio: cdc: ad7764: Push locking down into case statements in read/write_raw
staging: iio: cdc: ad7746: Break up use of chan->address and use FIELD_PREP etc
staging: iio: cdc: ad7746: Drop unused i2c_set_clientdata()
staging: iio: cdc: ad7746: Use _raw and _scale for temperature channels.
iio: core: Introduce _zeropoint for differential channels
staging: iio: cdc: ad7746: Switch from _offset to _zeropoint for differential channels.
staging: iio: cdc: ad7746: Use read_avail() rather than opencoding.
staging: iio: ad7746: White space cleanup
iio: cdc: ad7746: Add device specific ABI documentation.
iio: cdc: ad7746: Move driver out of staging.
iio: test: Mark file local structure arrays static.
iio: light: cm32181: Mark the dev_pm_ops static.
staging: iio: frequency: ad9834: Fix alignment for DMA safety
staging: iio: meter: ade7854: Fix alignment for DMA safety
staging: iio: resolver: ad2s1210: Fix alignment for DMA safety
iio: adc: mt6360: Drop an incorrect __maybe_unused marking.
iio: magn: hmc5843: Drop excessive indentation of assignments of hmc5843_driver
iio: magn: hmc5843: Move struct dev_pm_ops out of header
staging: iio: frequency: ad9832: Fix alignment for DMA safety
iio: adc: max1363: Drop provision to provide an IIO channel map via platform data
iio: pressure: icp10100: Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS().
Krzysztof Kozlowski (14):
dt-bindings: iio: adc: ti,am3359-adc: add ti,am654-adc
dt-bindings: iio: Drop Tomislav Denis
iio: MAINTAINERS: Drop Tomislav Denis
dt-bindings: iio: adc: Drop Patrick Vasseur
dt-bindings: iio: adc: use spi-peripheral-props.yaml
dt-bindings: iio: accel: use spi-peripheral-props.yaml
dt-bindings: iio: amplifiers: adi,ada4250: use spi-peripheral-props.yaml
dt-bindings: iio: dac: use spi-peripheral-props.yaml
dt-bindings: iio: frequency: adf4371: use spi-peripheral-props.yaml
dt-bindings: iio: health: ti,afe4403: use spi-peripheral-props.yaml
dt-bindings: iio: imu: use spi-peripheral-props.yaml
dt-bindings: iio: potentiometer: use spi-peripheral-props.yaml
dt-bindings: iio: samsung,sensorhub-rinato: use spi-peripheral-props.yaml
dt-bindings: iio: temperature: use spi-peripheral-props.yaml
Marcus Folkesson (1):
MAINTAINERS: Update Microchip MCP3911 to Maintained
Marijn Suijten (1):
iio: adc: qcom-spmi-adc5: Add missing VCOIN/GPIO[134] channels
Martin Larsson (1):
iio: adc: imx8qxp-adc: propagate regulator_get_voltage error
Nuno Sá (15):
iio: inkern: only release the device node when done with it
iio: inkern: fix return value in devm_of_iio_channel_get_by_name()
iio: inkern: only return error codes in iio_channel_get_*() APIs
iio: inkern: split of_iio_channel_get_by_name()
iio: inkern: move to fwnode properties
thermal: qcom: qcom-spmi-adc-tm5: convert to IIO fwnode API
iio: adc: ingenic-adc: convert to IIO fwnode interface
iio: adc: ab8500-gpadc: convert to device properties
iio: adc: at91-sama5d2_adc: convert to device properties
iio: adc: qcom-pm8xxx-xoadc: convert to device properties
iio: adc: qcom-spmi-vadc: convert to device properties
iio: adc: qcom-spmi-adc5: convert to device properties
iio: adc: stm32-adc: convert to device properties
iio: inkern: remove OF dependencies
iio: inkern: fix coding style warnings
Oleksij Rempel (3):
dt-bindings: iio: adc: ti,tsc2046: add vref-supply property
iio: adc: tsc2046: add vref support
iio: adc: tsc2046: silent spi_device_id warning
Ramona Bolboaca (2):
dt-bindings: iio: adc: Add max11205 documentation file
iio: adc: add max11205 adc driver
Rob Herring (1):
dt-bindings: iio: Add missing (unevaluated|additional)Properties on child nodes
Robert Marko (1):
iio: adc: qcom-spmi-adc5: add ADC5_VREF_VADC to rev2 ADC5
Shreeya Patel (3):
dt-bindings: Document ltrf216a light sensor bindings
iio: light: Add support for ltrf216a sensor
iio: light: ltrf216a: Add raw attribute
Uwe Kleine-König (11):
iio: adc: ad7124: Benefit from devm_clk_get_enabled() to simplify
iio: adc: ad7768-1: Benefit from devm_clk_get_enabled() to simplify
iio: adc: ad9467: Benefit from devm_clk_get_enabled() to simplify
iio: adc: ingenic-adc: Benefit from devm_clk_get_prepared() to simplify
iio: adc: lpc18xx: Benefit from devm_clk_get_enabled() to simplify
iio: adc: ti-ads131e08: Benefit from devm_clk_get_enabled() to simplify
iio: adc: xilinx-ams: Benefit from devm_clk_get_enabled() to simplify
iio: adc: xilinx-xadc: Benefit from devm_clk_get_enabled() to simplify
iio: frequency: adf4371: Benefit from devm_clk_get_enabled() to simplify
iio: frequency: adrf6780: Benefit from devm_clk_get_enabled() to simplify
iio: imu: adis16475: Benefit from devm_clk_get_enabled() to simplify
Vincent Whitchurch (1):
iio: Use per-device lockdep class for mlock
William Breathitt Gray (1):
iio: stx104: Move to addac subdirectory
Wolfram Sang (2):
iio: st_sensors: move from strlcpy with unused retval to strscpy
iio: imu: inv_mpu6050: move from strlcpy with unused retval to strscpy
wangjianli (1):
iio/accel: fix repeated words in comments
Documentation/ABI/testing/sysfs-bus-iio | 101 +-
Documentation/ABI/testing/sysfs-bus-iio-cdc-ad7746 | 11 +
.../bindings/iio/accel/adi,adis16201.yaml | 7 +-
.../bindings/iio/accel/adi,adis16240.yaml | 7 +-
.../devicetree/bindings/iio/accel/adi,adxl313.yaml | 7 +-
.../devicetree/bindings/iio/accel/adi,adxl345.yaml | 7 +-
.../devicetree/bindings/iio/accel/adi,adxl355.yaml | 7 +-
.../devicetree/bindings/iio/accel/adi,adxl367.yaml | 7 +-
.../devicetree/bindings/iio/accel/adi,adxl372.yaml | 7 +-
.../bindings/iio/accel/bosch,bma220.yaml | 7 +-
.../bindings/iio/accel/bosch,bma255.yaml | 5 +-
.../bindings/iio/accel/bosch,bmi088.yaml | 7 +-
.../devicetree/bindings/iio/accel/fsl,mma7455.yaml | 7 +-
.../bindings/iio/accel/kionix,kxsd9.yaml | 7 +-
.../bindings/iio/accel/memsensing,msa311.yaml | 53 +
.../bindings/iio/accel/murata,sca3300.yaml | 5 +-
.../bindings/iio/accel/nxp,fxls8962af.yaml | 7 +-
.../devicetree/bindings/iio/adc/adi,ad7124.yaml | 7 +-
.../devicetree/bindings/iio/adc/adi,ad7192.yaml | 7 +-
.../devicetree/bindings/iio/adc/adi,ad7280a.yaml | 7 +-
.../devicetree/bindings/iio/adc/adi,ad7292.yaml | 7 +-
.../devicetree/bindings/iio/adc/adi,ad7298.yaml | 6 +-
.../devicetree/bindings/iio/adc/adi,ad7476.yaml | 8 +-
.../devicetree/bindings/iio/adc/adi,ad7606.yaml | 7 +-
.../devicetree/bindings/iio/adc/adi,ad7768-1.yaml | 7 +-
.../devicetree/bindings/iio/adc/adi,ad7923.yaml | 8 +-
.../devicetree/bindings/iio/adc/adi,ad7949.yaml | 7 +-
.../devicetree/bindings/iio/adc/holt,hi8435.yaml | 7 +-
.../devicetree/bindings/iio/adc/lltc,ltc2496.yaml | 8 +-
.../devicetree/bindings/iio/adc/maxim,max1027.yaml | 5 +-
.../bindings/iio/adc/maxim,max11100.yaml | 7 +-
.../devicetree/bindings/iio/adc/maxim,max1118.yaml | 26 +-
.../bindings/iio/adc/maxim,max11205.yaml | 69 +
.../devicetree/bindings/iio/adc/maxim,max1241.yaml | 7 +-
.../bindings/iio/adc/microchip,mcp3201.yaml | 6 +-
.../bindings/iio/adc/microchip,mcp3911.yaml | 5 +-
.../bindings/iio/adc/qcom,spmi-vadc.yaml | 1 +
.../bindings/iio/adc/richtek,rtq6056.yaml | 56 +
.../bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 2 +
.../devicetree/bindings/iio/adc/st,stmpe-adc.yaml | 3 +-
.../devicetree/bindings/iio/adc/ti,adc0832.yaml | 7 +-
.../devicetree/bindings/iio/adc/ti,adc084s021.yaml | 7 +-
.../devicetree/bindings/iio/adc/ti,adc108s102.yaml | 6 +-
.../devicetree/bindings/iio/adc/ti,adc12138.yaml | 7 +-
.../devicetree/bindings/iio/adc/ti,adc128s052.yaml | 7 +-
.../devicetree/bindings/iio/adc/ti,adc161s626.yaml | 7 +-
.../devicetree/bindings/iio/adc/ti,ads1015.yaml | 1 +
.../devicetree/bindings/iio/adc/ti,ads124s08.yaml | 7 +-
.../devicetree/bindings/iio/adc/ti,ads131e08.yaml | 9 +-
.../devicetree/bindings/iio/adc/ti,ads8344.yaml | 7 +-
.../devicetree/bindings/iio/adc/ti,ads8688.yaml | 7 +-
.../devicetree/bindings/iio/adc/ti,am3359-adc.yaml | 11 +-
.../devicetree/bindings/iio/adc/ti,tlc4541.yaml | 7 +-
.../devicetree/bindings/iio/adc/ti,tsc2046.yaml | 8 +-
.../bindings/iio/adc/xlnx,zynqmp-ams.yaml | 1 +
.../bindings/iio/addac/adi,ad74413r.yaml | 1 +
.../bindings/iio/amplifiers/adi,ada4250.yaml | 7 +-
.../devicetree/bindings/iio/dac/adi,ad3552r.yaml | 1 +
.../devicetree/bindings/iio/dac/adi,ad5064.yaml | 7 +-
.../devicetree/bindings/iio/dac/adi,ad5360.yaml | 7 +-
.../devicetree/bindings/iio/dac/adi,ad5380.yaml | 9 +-
.../devicetree/bindings/iio/dac/adi,ad5421.yaml | 7 +-
.../devicetree/bindings/iio/dac/adi,ad5449.yaml | 7 +-
.../devicetree/bindings/iio/dac/adi,ad5624r.yaml | 9 +-
.../devicetree/bindings/iio/dac/adi,ad5686.yaml | 9 +-
.../devicetree/bindings/iio/dac/adi,ad5755.yaml | 9 +-
.../devicetree/bindings/iio/dac/adi,ad5758.yaml | 4 +-
.../devicetree/bindings/iio/dac/adi,ad5761.yaml | 7 +-
.../devicetree/bindings/iio/dac/adi,ad5764.yaml | 7 +-
.../devicetree/bindings/iio/dac/adi,ad5770r.yaml | 11 +-
.../devicetree/bindings/iio/dac/adi,ad5791.yaml | 9 +-
.../devicetree/bindings/iio/dac/adi,ad8801.yaml | 7 +-
.../devicetree/bindings/iio/dac/adi,ltc2688.yaml | 1 +
.../bindings/iio/dac/microchip,mcp4922.yaml | 9 +-
.../devicetree/bindings/iio/dac/ti,dac082s085.yaml | 9 +-
.../devicetree/bindings/iio/dac/ti,dac7311.yaml | 7 +-
.../devicetree/bindings/iio/dac/ti,dac7612.yaml | 7 +-
.../devicetree/bindings/iio/frequency/adf4371.yaml | 7 +-
.../devicetree/bindings/iio/health/ti,afe4403.yaml | 9 +-
.../devicetree/bindings/iio/imu/adi,adis16460.yaml | 7 +-
.../devicetree/bindings/iio/imu/adi,adis16480.yaml | 9 +-
.../devicetree/bindings/iio/imu/bosch,bmi160.yaml | 7 +-
.../bindings/iio/imu/invensense,icm42600.yaml | 6 +-
.../bindings/iio/imu/invensense,mpu6050.yaml | 5 +-
.../devicetree/bindings/iio/imu/nxp,fxos8700.yaml | 7 +-
.../devicetree/bindings/iio/imu/st,lsm6dsx.yaml | 9 +-
.../bindings/iio/light/liteon,ltrf216a.yaml | 49 +
.../iio/potentiometer/microchip,mcp41010.yaml | 9 +-
.../iio/potentiometer/microchip,mcp4131.yaml | 9 +-
.../bindings/iio/pressure/asc,dlhl60d.yaml | 2 +-
.../bindings/iio/samsung,sensorhub-rinato.yaml | 9 +-
.../bindings/iio/temperature/maxim,max31855k.yaml | 4 +-
.../bindings/iio/temperature/maxim,max31856.yaml | 6 +-
.../bindings/iio/temperature/maxim,max31865.yaml | 6 +-
.../bindings/iio/temperature/melexis,mlx90632.yaml | 4 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 40 +-
drivers/iio/accel/Kconfig | 13 +
drivers/iio/accel/Makefile | 2 +
drivers/iio/accel/adxl345_core.c | 7 +-
drivers/iio/accel/bma400.h | 14 +
drivers/iio/accel/bma400_core.c | 343 ++++-
drivers/iio/accel/kxcjk-1013.c | 2 +-
drivers/iio/accel/msa311.c | 1321 ++++++++++++++++++++
drivers/iio/adc/Kconfig | 45 +-
drivers/iio/adc/Makefile | 3 +-
drivers/iio/adc/ab8500-gpadc.c | 27 +-
drivers/iio/adc/ad7124.c | 15 +-
drivers/iio/adc/ad7768-1.c | 17 +-
drivers/iio/adc/ad9467.c | 17 +-
drivers/iio/adc/at91-sama5d2_adc.c | 714 +++++++++--
drivers/iio/adc/imx8qxp-adc.c | 8 +-
drivers/iio/adc/ingenic-adc.c | 23 +-
drivers/iio/adc/lpc18xx_adc.c | 18 +-
drivers/iio/adc/max11205.c | 183 +++
drivers/iio/adc/max1363.c | 6 -
drivers/iio/adc/mt6360-adc.c | 2 +-
drivers/iio/adc/qcom-pm8xxx-xoadc.c | 58 +-
drivers/iio/adc/qcom-spmi-adc5.c | 73 +-
drivers/iio/adc/qcom-spmi-vadc.c | 44 +-
drivers/iio/adc/rtq6056.c | 661 ++++++++++
drivers/iio/adc/stm32-adc.c | 128 +-
drivers/iio/adc/ti-ads131e08.c | 19 +-
drivers/iio/adc/ti-tsc2046.c | 69 +-
drivers/iio/adc/xilinx-ams.c | 15 +-
drivers/iio/adc/xilinx-xadc-core.c | 18 +-
drivers/iio/addac/Kconfig | 16 +
drivers/iio/addac/Makefile | 1 +
drivers/iio/{adc => addac}/stx104.c | 0
drivers/iio/cdc/Kconfig | 10 +
drivers/iio/cdc/Makefile | 1 +
drivers/{staging => }/iio/cdc/ad7746.c | 441 ++++---
drivers/iio/common/scmi_sensors/scmi_iio.c | 8 +-
drivers/iio/common/st_sensors/st_sensors_core.c | 2 +-
drivers/iio/frequency/adf4371.c | 17 +-
drivers/iio/frequency/admv1014.c | 3 +-
drivers/iio/frequency/adrf6780.c | 16 +-
drivers/iio/imu/adis16475.c | 15 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c | 4 +-
drivers/iio/industrialio-buffer.c | 5 +-
drivers/iio/industrialio-core.c | 19 +-
drivers/iio/industrialio-event.c | 14 +-
drivers/iio/industrialio-trigger.c | 1 +
drivers/iio/inkern.c | 272 ++--
drivers/iio/light/Kconfig | 11 +
drivers/iio/light/Makefile | 1 +
drivers/iio/light/cm32181.c | 2 +-
drivers/iio/light/ltrf216a.c | 550 ++++++++
drivers/iio/magnetometer/Kconfig | 4 +-
drivers/iio/magnetometer/hmc5843.h | 13 +-
drivers/iio/magnetometer/hmc5843_core.c | 8 +-
drivers/iio/magnetometer/hmc5843_i2c.c | 2 +-
drivers/iio/magnetometer/hmc5843_spi.c | 14 +-
drivers/iio/magnetometer/yamaha-yas530.c | 855 ++++++++++---
drivers/iio/pressure/dlhl60d.c | 5 +-
drivers/iio/pressure/icp10100.c | 10 +-
drivers/iio/temperature/mlx90632.c | 61 +-
drivers/iio/test/iio-test-rescale.c | 4 +-
drivers/staging/iio/Kconfig | 1 -
drivers/staging/iio/Makefile | 1 -
drivers/staging/iio/cdc/Kconfig | 17 -
drivers/staging/iio/cdc/Makefile | 6 -
drivers/staging/iio/frequency/ad9832.c | 4 +-
drivers/staging/iio/frequency/ad9834.c | 2 +-
drivers/staging/iio/meter/ade7854.h | 2 +-
drivers/staging/iio/resolver/ad2s1210.c | 4 +-
drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 3 +-
include/dt-bindings/iio/adc/at91-sama5d2_adc.h | 3 +
include/linux/iio/consumer.h | 28 +-
include/linux/iio/iio-opaque.h | 2 +
include/linux/iio/iio.h | 8 +-
include/linux/iio/types.h | 3 +
include/linux/string_helpers.h | 5 +
include/linux/units.h | 3 +
include/uapi/linux/iio/types.h | 3 +
tools/iio/iio_event_monitor.c | 8 +-
176 files changed, 5990 insertions(+), 1351 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-cdc-ad7746
create mode 100644 Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml
create mode 100644 Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml
create mode 100644 Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml
create mode 100644 Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
create mode 100644 drivers/iio/accel/msa311.c
create mode 100644 drivers/iio/adc/max11205.c
create mode 100644 drivers/iio/adc/rtq6056.c
rename drivers/iio/{adc => addac}/stx104.c (100%)
rename drivers/{staging => }/iio/cdc/ad7746.c (66%)
create mode 100644 drivers/iio/light/ltrf216a.c
delete mode 100644 drivers/staging/iio/cdc/Kconfig
delete mode 100644 drivers/staging/iio/cdc/Makefile
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PULL] IIO: 1st set of new device support, cleanup and features for the 6.1 cycle.
2022-09-17 13:03 [PULL] IIO: 1st set of new device support, cleanup and features for the 6.1 cycle Jonathan Cameron
@ 2022-09-21 14:09 ` Greg KH
0 siblings, 0 replies; 2+ messages in thread
From: Greg KH @ 2022-09-21 14:09 UTC (permalink / raw)
To: Jonathan Cameron; +Cc: linux-iio
On Sat, Sep 17, 2022 at 02:03:11PM +0100, Jonathan Cameron wrote:
> The following changes since commit 568035b01cfb107af8d2e4bd2fb9aea22cf5b868:
>
> Linux 6.0-rc1 (2022-08-14 15:50:18 -0700)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-6.1a
Pulled and pushed out, thanks.
greg k-h
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-09-21 14:11 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-09-17 13:03 [PULL] IIO: 1st set of new device support, cleanup and features for the 6.1 cycle Jonathan Cameron
2022-09-21 14:09 ` Greg KH
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox