From: David Lechner <dlechner@baylibre.com>
To: Antoniu Miclaus <antoniu.miclaus@analog.com>,
jic23@kernel.org, robh@kernel.org, conor+dt@kernel.org,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-pwm@vger.kernel.org
Subject: Re: [PATCH v6 5/8] iio: adc: adi-axi-adc: set data format
Date: Tue, 12 Nov 2024 14:11:05 -0600 [thread overview]
Message-ID: <c42a631a-4d07-44ec-9cec-862ca25af15e@baylibre.com> (raw)
In-Reply-To: <20241111121203.3699-6-antoniu.miclaus@analog.com>
On 11/11/24 6:12 AM, Antoniu Miclaus wrote:
> Add support for selecting the data format within the AXI ADC ip.
>
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
> ---
> changes in v6:
> - use switch case
> - add macro definition for packet format mask and sizes
> drivers/iio/adc/adi-axi-adc.c | 30 ++++++++++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
> diff --git a/drivers/iio/adc/adi-axi-adc.c b/drivers/iio/adc/adi-axi-adc.c
> index f6475bc93796..9bf967d5b730 100644
> --- a/drivers/iio/adc/adi-axi-adc.c
> +++ b/drivers/iio/adc/adi-axi-adc.c
> @@ -45,6 +45,12 @@
> #define ADI_AXI_ADC_REG_CTRL 0x0044
> #define ADI_AXI_ADC_CTRL_DDR_EDGESEL_MASK BIT(1)
>
> +#define ADI_AXI_ADC_REG_CNTRL_3 0x004c
> +#define AD485X_CNTRL_3_CUSTOM_CTRL_PACKET_FORMAT_MSK GENMASK(1, 0)
> +#define AD485X_PACKET_FORMAT_20BIT 0x0
> +#define AD485X_PACKET_FORMAT_24BIT 0x1
> +#define AD485X_PACKET_FORMAT_32BIT 0x2
> +
> #define ADI_AXI_ADC_REG_DRP_STATUS 0x0074
> #define ADI_AXI_ADC_DRP_LOCKED BIT(17)
>
> @@ -312,6 +318,29 @@ static int axi_adc_interface_type_get(struct iio_backend *back,
> return 0;
> }
>
> +static int axi_adc_data_size_set(struct iio_backend *back, unsigned int size)
> +{
> + struct adi_axi_adc_state *st = iio_backend_get_priv(back);
> + unsigned int val;
> +
> + switch (size) {
What happened to 16 bit for 16-bit chips?
Ideally there should be an identification register we can read or
a compatible string from the devicetree that says if the HDL was
compiled for a 16-bit or 20-bit chip and we would have two different
versions of this function and pick one based on what HDL is being
used.
> + case 20:
> + val = AD485X_PACKET_FORMAT_20BIT;
> + break;
> + case 24:
> + val = AD485X_PACKET_FORMAT_24BIT;
> + break;
> + case 32:
> + val = AD485X_PACKET_FORMAT_32BIT;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return regmap_update_bits(st->regmap, ADI_AXI_ADC_REG_CNTRL_3,
> + AD485X_CNTRL_3_CUSTOM_CTRL_PACKET_FORMAT_MSK, val);
> +}
> +
> static struct iio_buffer *axi_adc_request_buffer(struct iio_backend *back,
> struct iio_dev *indio_dev)
> {
> @@ -360,6 +389,7 @@ static const struct iio_backend_ops adi_axi_adc_ops = {
> .test_pattern_set = axi_adc_test_pattern_set,
> .chan_status = axi_adc_chan_status,
> .interface_type_get = axi_adc_interface_type_get,
> + .data_size_set = axi_adc_data_size_set,
> .debugfs_reg_access = iio_backend_debugfs_ptr(axi_adc_reg_access),
> .debugfs_print_chan_status = iio_backend_debugfs_ptr(axi_adc_debugfs_print_chan_status),
> };
next prev parent reply other threads:[~2024-11-12 20:11 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-11 12:11 [PATCH v6 0/8] *** Add support for AD485x DAS Family *** Antoniu Miclaus
2024-11-11 12:11 ` [PATCH v6 1/8] iio: backend: add API for interface get Antoniu Miclaus
2024-11-11 12:11 ` [PATCH v6 2/8] iio: backend: add support for data size set Antoniu Miclaus
2024-11-11 12:11 ` [PATCH v6 3/8] iio: backend: add API for oversampling Antoniu Miclaus
2024-11-11 15:41 ` Nuno Sá
2024-11-23 16:02 ` Jonathan Cameron
2024-11-23 16:05 ` Jonathan Cameron
2024-11-11 12:11 ` [PATCH v6 4/8] iio: adc: adi-axi-adc: add interface type Antoniu Miclaus
2024-11-11 12:12 ` [PATCH v6 5/8] iio: adc: adi-axi-adc: set data format Antoniu Miclaus
2024-11-12 20:11 ` David Lechner [this message]
2024-11-11 12:12 ` [PATCH v6 6/8] iio: adc: adi-axi-adc: add oversampling Antoniu Miclaus
2024-11-12 20:12 ` David Lechner
2024-11-23 16:04 ` Jonathan Cameron
2024-11-11 12:12 ` [PATCH v6 7/8] dt-bindings: iio: adc: add ad4851 Antoniu Miclaus
2024-11-11 12:12 ` [PATCH v6 8/8] iio: adc: ad4851: add ad485x driver Antoniu Miclaus
2024-11-12 20:02 ` David Lechner
2024-11-14 10:39 ` Miclaus, Antoniu
2024-11-14 14:47 ` David Lechner
2024-11-15 10:59 ` Miclaus, Antoniu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c42a631a-4d07-44ec-9cec-862ca25af15e@baylibre.com \
--to=dlechner@baylibre.com \
--cc=antoniu.miclaus@analog.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox