Re: [PATCH 5/5] dt-bindings: iio: adc: xilinx-xadc: convert to YAML format

[David Lechner <dlechner@baylibre.com>]

On 3/19/26 9:49 AM, Sai Krishna Potthuri wrote:
> Hi David Lechner,
> 
> On 3/19/2026 7:53 PM, David Lechner wrote:
>> On 3/19/26 8:52 AM, Sai Krishna Potthuri wrote:
>>> Hi Krzysztof,
>>>
>>> On 2/21/2026 4:08 PM, Krzysztof Kozlowski wrote:
>>>> On Fri, Feb 20, 2026 at 11:09:41AM +0530, Sai Krishna Potthuri wrote:
>>>>> Convert the xilinx-xadc.txt Devicetree binding to a YAML schema format
>>>>> and remove the old text binding.
>>>>>
>>>>> +
>>>>> +  xlnx,channels:
>>>>> +    $ref: '#/$defs/channels'
>>>>> +
>>>>> +allOf:
>>>>
>>>> Missing ref since you use unevaluatedProperties...
>>>>
>>>>> +  - if:
>>>>> +      required:
>>>>> +        - xlnx,external-mux
>>>>> +      properties:
>>>>> +        xlnx,external-mux:
>>>>> +          enum:
>>>>> +            - single
>>>>> +            - dual
>>>>> +    then:
>>>>> +      required:
>>>>> +        - xlnx,external-mux-channel
>>>>> +
>>>>> +required:
>>>>> +  - compatible
>>>>> +  - reg
>>>>> +
>>>>> +unevaluatedProperties: false
>>>>
>>>> or you meant additionalProperties?
>>>>
>>>>> +
>>>>> +$defs:
>>>>
>>>> Why this is a def, not used directly? I see only one usage of this def.
>>>
>>> I am getting the below error if i define the patternProperties directly.
>>> Seems like complex vendor peroperties should be referenced via $ref.
>>> Please suggest if there is any better way to deal this.
>>
>> It is hard to say without seeing the new version of what you wrote.
> 
> In v1 series, i created $def and referenced this in xlnx,channels to avoid the error that i mentioned.

Is the code below the code that causes the error?

> 
> v1 code:
>   xlnx,channels:
>     $ref: '#/$defs/channels'
> 
>   $defs:
>   channels:

Is this indent bug just from copying to email or does it exist in
the source that is causing the error?

>     type: object
>     description: List of external channels that are connected to the ADC
>     properties:
>       '#address-cells':
>         const: 1
>       '#size-cells':
>         const: 0
> 
>     patternProperties:
>       "^channel@([0-9]|1[0-6])$":
>         type: object
>         properties:
>           reg:
>             minimum: 0
>             maximum: 16
>             description: |
>               Pair of pins the channel is connected to:
>                 0: VP/VN
>                 1-16: VAUXP[0-15]/VAUXN[0-15]
>               Note each channel number should only be used at most once.
> 
>           xlnx,bipolar:
>             type: boolean
>             description: If set, the channel is used in bipolar mode
> 
>         required:
>           - reg
> 
>         unevaluatedProperties: false
> 
>     required:
>       - '#address-cells'
>       - '#size-cells'
> 
>     unevaluatedProperties: false
> 
> 
> Regards
> Sai krishna
> 
> 
>>
>>
>>
>>>
>>> linux-xlnx/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.yaml: properties:xlnx,channels:type: 'boolean' was expected
>>>      hint: A vendor boolean property can use "type: boolean"
>>>      from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml#
>>>    LINT    ../Documentation/devicetree/bindings
>>>    DTEX    Documentation/devicetree/bindings/iio/adc/xilinx-xadc.example.dts
>>>    DTC [C] Documentation/devicetree/bindings/iio/adc/xilinx-xadc.example.dtb
>>>
>>>
>>> Regards
>>> Sai Krishna
>>>
>>>>
>>>>> +  channels:
>>>>> +    type: object
>>>>> +    description: List of external channels that are connected to the ADC
>>>>> +    properties:
>>>>> +      '#address-cells':
>>>>> +        const: 1
>>>>> +      '#size-cells':
>>>>> +        const: 0
>>>>> +
>>>>> +    patternProperties:
>>>>> +      "^channel@([0-9]|1[0-6])$":
>>>>> +        type: object
>>>>> +        properties:
>>>>> +          reg:
>>>>> +            minimum: 0
>>>>> +            maximum: 16
>>>>> +            description: |
>>>>> +              Pair of pins the channel is connected to:
>>>>> +                0: VP/VN
>>>>> +                1-16: VAUXP[0-15]/VAUXN[0-15]
>>>>> +              Note each channel number should only be used at most once.
>>>>> +
>>>>> +          xlnx,bipolar:
>>>>> +            type: boolean
>>>>> +            description: If set, the channel is used in bipolar mode
>>>>> +
>>>>> +        required:
>>>>> +          - reg
>>>>> +
>>>>> +        unevaluatedProperties: false
>>>>
>