Re: [PATCH v3 2/9] iio: dac: ad3552r-hs: clear reset status flag

["Nuno Sá" <noname.nuno@gmail.com>]

On Sun, 2025-01-12 at 15:04 +0000, Jonathan Cameron wrote:
> On Fri, 10 Jan 2025 11:24:14 +0100
> Angelo Dureghello <adureghello@baylibre.com> wrote:
> 
> > From: Angelo Dureghello <adureghello@baylibre.com>
> > 
> > Clear reset status flag, to keep error status register
> > clean after reset (ad3552r manual, rev B table 38).
> > 
> > Reset error flag was left to 1, so debugging registers, the
> > "Error Status Register" was dirty (0x01). It is important
> > to clear this bit, so if there is any reset event over normal
> > working mode, it is possible to detect it.
> > 
> > Fixes: 0b4d9fe58be8 ("iio: dac: ad3552r: add high-speed platform driver")
> > Reviewed-by: David Lechner <dlechner@baylibre.com>
> > Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
> Ah. I should have checked for newer versions. Anyhow, picked up v2 of patches
> 1 and 2.

Oh just saw this now. Anyways, just gave my tag for patch 1. If you can still
take it, feel free to do so. Same for this one:

Reviewed-by: Nuno Sa <nuno.sa@analog.com>

> 
> > ---
> >  drivers/iio/dac/ad3552r-hs.c | 6 ++++++
> >  1 file changed, 6 insertions(+)
> > 
> > diff --git a/drivers/iio/dac/ad3552r-hs.c b/drivers/iio/dac/ad3552r-hs.c
> > index 216c634f3eaf..8974df625670 100644
> > --- a/drivers/iio/dac/ad3552r-hs.c
> > +++ b/drivers/iio/dac/ad3552r-hs.c
> > @@ -329,6 +329,12 @@ static int ad3552r_hs_setup(struct ad3552r_hs_state
> > *st)
> >  		dev_info(st->dev, "Chip ID error. Expected 0x%x, Read
> > 0x%x\n",
> >  			 AD3552R_ID, id);
> >  
> > +	/* Clear reset error flag, see ad3552r manual, rev B table 38. */
> > +	ret = st->data->bus_reg_write(st->back,
> > AD3552R_REG_ADDR_ERR_STATUS,
> > +				      AD3552R_MASK_RESET_STATUS, 1);
> > +	if (ret)
> > +		return ret;
> > +
> >  	ret = st->data->bus_reg_write(st->back,
> >  				      AD3552R_REG_ADDR_SH_REFERENCE_CONFIG,
> >  				      0, 1);
> > 
>