* [PATCH resend v4] Input: silead - Add support for capactive home button @ 2018-01-09 14:30 Hans de Goede 2018-01-09 14:30 ` [PATCH resend v4] Input: silead - Add support for capactive home button found on some x86 tablets Hans de Goede 0 siblings, 1 reply; 3+ messages in thread From: Hans de Goede @ 2018-01-09 14:30 UTC (permalink / raw) To: Dmitry Torokhov, Benjamin Tissoires; +Cc: Hans de Goede, linux-input Hi Dmitry, Now that this patch has an ack from Rob for the DT bits, this is ready to be queued up for 4.16 AFAICT. Regards, Hans ^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH resend v4] Input: silead - Add support for capactive home button found on some x86 tablets 2018-01-09 14:30 [PATCH resend v4] Input: silead - Add support for capactive home button Hans de Goede @ 2018-01-09 14:30 ` Hans de Goede 2018-01-09 19:41 ` Dmitry Torokhov 0 siblings, 1 reply; 3+ messages in thread From: Hans de Goede @ 2018-01-09 14:30 UTC (permalink / raw) To: Dmitry Torokhov, Benjamin Tissoires Cc: Hans de Goede, linux-input, Rob Herring On some x86 tablets with a silead touchscreen the windows logo on the front is a capacitive home button. Touching this button results in a touch with bits 12-15 of the Y coordinates set, while normally only the lower 12 are used. Detect this and report a KEY_LEFTMETA press when this happens. Note for now we only respond to the Y coordinate bits 12-15 containing 0x01, on some tablets *without* a capacative button I've noticed these bits containing 0x04 when crossing the edges of the screen. Cc: Rob Herring <robh+dt@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- Changes in v2: -Only enable support for the home-button if a "silead,home-button" boolean device-property is set on the device Changes in v3: -Document the new silead,home-button property in: Documentation/devicetree/bindings/input/touchscreen/goodix.txt Changes in v4: -Add Rob's Acked-by for the DT binding --- .../bindings/input/touchscreen/silead_gsl1680.txt | 2 + drivers/input/touchscreen/silead.c | 46 ++++++++++++++++------ 2 files changed, 37 insertions(+), 11 deletions(-) diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt index 6aa625e0cb8d..84752de12412 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt @@ -23,6 +23,8 @@ Optional properties: - touchscreen-inverted-y : See touchscreen.txt - touchscreen-swapped-x-y : See touchscreen.txt - silead,max-fingers : maximum number of fingers the touchscreen can detect +- silead,home-button : Boolean, set to true on devices which have a + capacitive home-button build into the touchscreen - vddio-supply : regulator phandle for controller VDDIO - avdd-supply : regulator phandle for controller AVDD diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c index 531f22891462..ff7043f74a3d 100644 --- a/drivers/input/touchscreen/silead.c +++ b/drivers/input/touchscreen/silead.c @@ -56,7 +56,7 @@ #define SILEAD_POINT_Y_MSB_OFF 0x01 #define SILEAD_POINT_X_OFF 0x02 #define SILEAD_POINT_X_MSB_OFF 0x03 -#define SILEAD_TOUCH_ID_MASK 0xF0 +#define SILEAD_EXTRA_DATA_MASK 0xF0 #define SILEAD_CMD_SLEEP_MIN 10000 #define SILEAD_CMD_SLEEP_MAX 20000 @@ -109,6 +109,9 @@ static int silead_ts_request_input_dev(struct silead_ts_data *data) INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED | INPUT_MT_TRACK); + if (device_property_read_bool(dev, "silead,home-button")) + input_set_capability(data->input, EV_KEY, KEY_LEFTMETA); + data->input->name = SILEAD_TS_NAME; data->input->phys = "input/ts"; data->input->id.bustype = BUS_I2C; @@ -139,7 +142,8 @@ static void silead_ts_read_data(struct i2c_client *client) struct input_dev *input = data->input; struct device *dev = &client->dev; u8 *bufp, buf[SILEAD_TS_DATA_LEN]; - int touch_nr, error, i; + int touch_nr, softbutton, error, i; + bool softbutton_pressed = false; error = i2c_smbus_read_i2c_block_data(client, SILEAD_REG_DATA, SILEAD_TS_DATA_LEN, buf); @@ -148,21 +152,40 @@ static void silead_ts_read_data(struct i2c_client *client) return; } - touch_nr = buf[0]; - if (touch_nr > data->max_fingers) { + if (buf[0] > data->max_fingers) { dev_warn(dev, "More touches reported then supported %d > %d\n", - touch_nr, data->max_fingers); - touch_nr = data->max_fingers; + buf[0], data->max_fingers); + buf[0] = data->max_fingers; } + touch_nr = 0; bufp = buf + SILEAD_POINT_DATA_LEN; - for (i = 0; i < touch_nr; i++, bufp += SILEAD_POINT_DATA_LEN) { - /* Bits 4-7 are the touch id */ - data->id[i] = (bufp[SILEAD_POINT_X_MSB_OFF] & - SILEAD_TOUCH_ID_MASK) >> 4; - touchscreen_set_mt_pos(&data->pos[i], &data->prop, + for (i = 0; i < buf[0]; i++, bufp += SILEAD_POINT_DATA_LEN) { + softbutton = (bufp[SILEAD_POINT_Y_MSB_OFF] & + SILEAD_EXTRA_DATA_MASK) >> 4; + + if (softbutton) { + /* + * For now only respond to softbutton == 0x01, some + * tablets *without* a capacative button send 0x04 + * when crossing the edges of the screen. + */ + if (softbutton == 0x01) + softbutton_pressed = true; + + continue; + } + + /* + * Bits 4-7 are the touch id, note not all models have + * hardware touch ids so atm we don't use these. + */ + data->id[touch_nr] = (bufp[SILEAD_POINT_X_MSB_OFF] & + SILEAD_EXTRA_DATA_MASK) >> 4; + touchscreen_set_mt_pos(&data->pos[touch_nr], &data->prop, get_unaligned_le16(&bufp[SILEAD_POINT_X_OFF]) & 0xfff, get_unaligned_le16(&bufp[SILEAD_POINT_Y_OFF]) & 0xfff); + touch_nr++; } input_mt_assign_slots(input, data->slots, data->pos, touch_nr, 0); @@ -178,6 +201,7 @@ static void silead_ts_read_data(struct i2c_client *client) } input_mt_sync_frame(input); + input_report_key(input, KEY_LEFTMETA, softbutton_pressed); input_sync(input); } -- 2.14.3 ^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH resend v4] Input: silead - Add support for capactive home button found on some x86 tablets 2018-01-09 14:30 ` [PATCH resend v4] Input: silead - Add support for capactive home button found on some x86 tablets Hans de Goede @ 2018-01-09 19:41 ` Dmitry Torokhov 0 siblings, 0 replies; 3+ messages in thread From: Dmitry Torokhov @ 2018-01-09 19:41 UTC (permalink / raw) To: Hans de Goede; +Cc: Benjamin Tissoires, linux-input, Rob Herring On Tue, Jan 09, 2018 at 03:30:54PM +0100, Hans de Goede wrote: > On some x86 tablets with a silead touchscreen the windows logo on the > front is a capacitive home button. Touching this button results in a touch > with bits 12-15 of the Y coordinates set, while normally only the lower 12 > are used. > > Detect this and report a KEY_LEFTMETA press when this happens. Note for > now we only respond to the Y coordinate bits 12-15 containing 0x01, on some > tablets *without* a capacative button I've noticed these bits containing > 0x04 when crossing the edges of the screen. > > Cc: Rob Herring <robh+dt@kernel.org> > Acked-by: Rob Herring <robh@kernel.org> > Signed-off-by: Hans de Goede <hdegoede@redhat.com> Applied, thank you. > --- > Changes in v2: > -Only enable support for the home-button if a "silead,home-button" > boolean device-property is set on the device > > Changes in v3: > -Document the new silead,home-button property in: > Documentation/devicetree/bindings/input/touchscreen/goodix.txt > > Changes in v4: > -Add Rob's Acked-by for the DT binding > --- > .../bindings/input/touchscreen/silead_gsl1680.txt | 2 + > drivers/input/touchscreen/silead.c | 46 ++++++++++++++++------ > 2 files changed, 37 insertions(+), 11 deletions(-) > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt > index 6aa625e0cb8d..84752de12412 100644 > --- a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt > +++ b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt > @@ -23,6 +23,8 @@ Optional properties: > - touchscreen-inverted-y : See touchscreen.txt > - touchscreen-swapped-x-y : See touchscreen.txt > - silead,max-fingers : maximum number of fingers the touchscreen can detect > +- silead,home-button : Boolean, set to true on devices which have a > + capacitive home-button build into the touchscreen > - vddio-supply : regulator phandle for controller VDDIO > - avdd-supply : regulator phandle for controller AVDD > > diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c > index 531f22891462..ff7043f74a3d 100644 > --- a/drivers/input/touchscreen/silead.c > +++ b/drivers/input/touchscreen/silead.c > @@ -56,7 +56,7 @@ > #define SILEAD_POINT_Y_MSB_OFF 0x01 > #define SILEAD_POINT_X_OFF 0x02 > #define SILEAD_POINT_X_MSB_OFF 0x03 > -#define SILEAD_TOUCH_ID_MASK 0xF0 > +#define SILEAD_EXTRA_DATA_MASK 0xF0 > > #define SILEAD_CMD_SLEEP_MIN 10000 > #define SILEAD_CMD_SLEEP_MAX 20000 > @@ -109,6 +109,9 @@ static int silead_ts_request_input_dev(struct silead_ts_data *data) > INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED | > INPUT_MT_TRACK); > > + if (device_property_read_bool(dev, "silead,home-button")) > + input_set_capability(data->input, EV_KEY, KEY_LEFTMETA); > + > data->input->name = SILEAD_TS_NAME; > data->input->phys = "input/ts"; > data->input->id.bustype = BUS_I2C; > @@ -139,7 +142,8 @@ static void silead_ts_read_data(struct i2c_client *client) > struct input_dev *input = data->input; > struct device *dev = &client->dev; > u8 *bufp, buf[SILEAD_TS_DATA_LEN]; > - int touch_nr, error, i; > + int touch_nr, softbutton, error, i; > + bool softbutton_pressed = false; > > error = i2c_smbus_read_i2c_block_data(client, SILEAD_REG_DATA, > SILEAD_TS_DATA_LEN, buf); > @@ -148,21 +152,40 @@ static void silead_ts_read_data(struct i2c_client *client) > return; > } > > - touch_nr = buf[0]; > - if (touch_nr > data->max_fingers) { > + if (buf[0] > data->max_fingers) { > dev_warn(dev, "More touches reported then supported %d > %d\n", > - touch_nr, data->max_fingers); > - touch_nr = data->max_fingers; > + buf[0], data->max_fingers); > + buf[0] = data->max_fingers; > } > > + touch_nr = 0; > bufp = buf + SILEAD_POINT_DATA_LEN; > - for (i = 0; i < touch_nr; i++, bufp += SILEAD_POINT_DATA_LEN) { > - /* Bits 4-7 are the touch id */ > - data->id[i] = (bufp[SILEAD_POINT_X_MSB_OFF] & > - SILEAD_TOUCH_ID_MASK) >> 4; > - touchscreen_set_mt_pos(&data->pos[i], &data->prop, > + for (i = 0; i < buf[0]; i++, bufp += SILEAD_POINT_DATA_LEN) { > + softbutton = (bufp[SILEAD_POINT_Y_MSB_OFF] & > + SILEAD_EXTRA_DATA_MASK) >> 4; > + > + if (softbutton) { > + /* > + * For now only respond to softbutton == 0x01, some > + * tablets *without* a capacative button send 0x04 > + * when crossing the edges of the screen. > + */ > + if (softbutton == 0x01) > + softbutton_pressed = true; > + > + continue; > + } > + > + /* > + * Bits 4-7 are the touch id, note not all models have > + * hardware touch ids so atm we don't use these. > + */ > + data->id[touch_nr] = (bufp[SILEAD_POINT_X_MSB_OFF] & > + SILEAD_EXTRA_DATA_MASK) >> 4; > + touchscreen_set_mt_pos(&data->pos[touch_nr], &data->prop, > get_unaligned_le16(&bufp[SILEAD_POINT_X_OFF]) & 0xfff, > get_unaligned_le16(&bufp[SILEAD_POINT_Y_OFF]) & 0xfff); > + touch_nr++; > } > > input_mt_assign_slots(input, data->slots, data->pos, touch_nr, 0); > @@ -178,6 +201,7 @@ static void silead_ts_read_data(struct i2c_client *client) > } > > input_mt_sync_frame(input); > + input_report_key(input, KEY_LEFTMETA, softbutton_pressed); > input_sync(input); > } > > -- > 2.14.3 > -- Dmitry ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-01-09 19:41 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2018-01-09 14:30 [PATCH resend v4] Input: silead - Add support for capactive home button Hans de Goede 2018-01-09 14:30 ` [PATCH resend v4] Input: silead - Add support for capactive home button found on some x86 tablets Hans de Goede 2018-01-09 19:41 ` Dmitry Torokhov
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox