[PATCH AUTOSEL 4.14 02/41] Input: hyper-v - fix wakeup from suspend-to-idle

[PATCH AUTOSEL 4.14 02/41] Input: hyper-v - fix wakeup from suspend-to-idle

[Sasha Levin]

From: Vitaly Kuznetsov <vkuznets@redhat.com>

[ Upstream commit 10f91c73cc41ceead210a905dbd196398e99c7d2 ]

It makes little sense but still possible to put Hyper-V guests into
suspend-to-idle state. To wake them up two wakeup sources were registered
in the past: hyperv-keyboard and hid-hyperv. However, since
commit eed4d47efe95 ("ACPI / sleep: Ignore spurious SCI wakeups from
suspend-to-idle") pm_wakeup_event() from these devices is ignored. Switch
to pm_wakeup_hard_event() API as these devices are actually the only
possible way to wakeup Hyper-V guests.

Fixes: eed4d47efe95 (ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle)
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-hyperv.c              | 2 +-
 drivers/input/serio/hyperv-keyboard.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hid/hid-hyperv.c b/drivers/hid/hid-hyperv.c
index 6039f071fab1..5f1de24206ab 100644
--- a/drivers/hid/hid-hyperv.c
+++ b/drivers/hid/hid-hyperv.c
@@ -309,7 +309,7 @@ static void mousevsc_on_receive(struct hv_device *device,
 		hid_input_report(input_dev->hid_device, HID_INPUT_REPORT,
 				 input_dev->input_buf, len, 1);
 
-		pm_wakeup_event(&input_dev->device->device, 0);
+		pm_wakeup_hard_event(&input_dev->device->device);
 
 		break;
 	default:
diff --git a/drivers/input/serio/hyperv-keyboard.c b/drivers/input/serio/hyperv-keyboard.c
index 25151d9214e0..55288a026e4e 100644
--- a/drivers/input/serio/hyperv-keyboard.c
+++ b/drivers/input/serio/hyperv-keyboard.c
@@ -177,7 +177,7 @@ static void hv_kbd_on_receive(struct hv_device *hv_dev,
 		 * state because the Enter-UP can trigger a wakeup at once.
 		 */
 		if (!(info & IS_BREAK))
-			pm_wakeup_event(&hv_dev->device, 0);
+			pm_wakeup_hard_event(&hv_dev->device);
 
 		break;
 
-- 
2.19.1

[PATCH AUTOSEL 4.14 20/41] Input: synaptics - enable SMBus for HP 15-ay000

[Sasha Levin]

From: Teika Kazura <teika@gmx.com>

[ Upstream commit 5a6dab15f7a79817cab4af612ddd99eda793fce6 ]

SMBus works fine for the touchpad with id SYN3221, used in the HP 15-ay000
series,

This device has been reported in these messages in the "linux-input"
mailing list:
* https://marc.info/?l=linux-input&m=152016683003369&w=2
* https://www.spinics.net/lists/linux-input/msg52525.html

Reported-by: Nitesh Debnath <niteshkd1999@gmail.com>
Reported-by: Teika Kazura <teika@gmx.com>
Signed-off-by: Teika Kazura <teika@gmx.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/mouse/synaptics.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 65c9095eb517..54f0d037b5b6 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -178,6 +178,7 @@ static const char * const smbus_pnp_ids[] = {
 	"LEN0096", /* X280 */
 	"LEN0097", /* X280 -> ALPS trackpoint */
 	"LEN200f", /* T450s */
+	"SYN3221", /* HP 15-ay000 */
 	NULL
 };
 
-- 
2.19.1

[PATCH AUTOSEL 4.14 21/41] Input: omap-keypad - fix keyboard debounce configuration

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 6c3516fed7b61a3527459ccfa67fab130d910610 ]

I noticed that the Android v3.0.8 kernel on droid4 is using different
keypad values from the mainline kernel and does not have issues with
keys occasionally being stuck until pressed again. Turns out there was
an earlier patch posted to fix this as "Input: omap-keypad: errata i689:
Correct debounce time", but it was never reposted to fix use macros
for timing calculations.

This updated version is using macros, and also fixes the use of the
input clock rate to use 32768KiHz instead of 32000KiHz. And we want to
use the known good Android kernel values of 3 and 6 instead of 2 and 6
in the earlier patch.

Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/keyboard/omap4-keypad.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
index 940d38b08e6b..ce8e2baf31bb 100644
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -60,8 +60,18 @@
 
 /* OMAP4 values */
 #define OMAP4_VAL_IRQDISABLE		0x0
-#define OMAP4_VAL_DEBOUNCINGTIME	0x7
-#define OMAP4_VAL_PVT			0x7
+
+/*
+ * Errata i689: If a key is released for a time shorter than debounce time,
+ * the keyboard will idle and never detect the key release. The workaround
+ * is to use at least a 12ms debounce time. See omap5432 TRM chapter
+ * "26.4.6.2 Keyboard Controller Timer" for more information.
+ */
+#define OMAP4_KEYPAD_PTV_DIV_128        0x6
+#define OMAP4_KEYPAD_DEBOUNCINGTIME_MS(dbms, ptv)     \
+	((((dbms) * 1000) / ((1 << ((ptv) + 1)) * (1000000 / 32768))) - 1)
+#define OMAP4_VAL_DEBOUNCINGTIME_16MS					\
+	OMAP4_KEYPAD_DEBOUNCINGTIME_MS(16, OMAP4_KEYPAD_PTV_DIV_128)
 
 enum {
 	KBD_REVISION_OMAP4 = 0,
@@ -181,9 +191,9 @@ static int omap4_keypad_open(struct input_dev *input)
 
 	kbd_writel(keypad_data, OMAP4_KBD_CTRL,
 			OMAP4_DEF_CTRL_NOSOFTMODE |
-			(OMAP4_VAL_PVT << OMAP4_DEF_CTRL_PTV_SHIFT));
+			(OMAP4_KEYPAD_PTV_DIV_128 << OMAP4_DEF_CTRL_PTV_SHIFT));
 	kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME,
-			OMAP4_VAL_DEBOUNCINGTIME);
+			OMAP4_VAL_DEBOUNCINGTIME_16MS);
 	/* clear pending interrupts */
 	kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
 			 kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
-- 
2.19.1