[PATCH AUTOSEL 6.4 34/58] dt-bindings: input: goodix: Add "goodix,no-reset-during-suspend" property

[PATCH AUTOSEL 6.4 34/58] dt-bindings: input: goodix: Add "goodix,no-reset-during-suspend" property

[Sasha Levin]

From: Fei Shao <fshao@chromium.org>

[ Upstream commit 359ed24a0dd3802e703ec8071dc3b6ed446de5f0 ]

We observed that on Chromebook device Steelix, if Goodix GT7375P
touchscreen is powered in suspend (because, for example, it connects to
an always-on regulator) and with the reset GPIO asserted, it will
introduce about 14mW power leakage.

To address that, we add this property to skip reset during suspend.
If it's set, the driver will stop asserting the reset GPIO during
power-down. Refer to the comments in the driver for details.

Signed-off-by: Fei Shao <fshao@chromium.org>
Suggested-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../devicetree/bindings/input/goodix,gt7375p.yaml        | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
index ce18d7dadae23..1edad1da1196d 100644
--- a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
+++ b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
@@ -43,6 +43,15 @@ properties:
       itself as long as it allows the main board to make signals compatible
       with what the touchscreen is expecting for its IO rails.
 
+  goodix,no-reset-during-suspend:
+    description:
+      Set this to true to enforce the driver to not assert the reset GPIO
+      during suspend.
+      Due to potential touchscreen hardware flaw, back-powering could happen in
+      suspend if the power supply is on and with active-low reset GPIO asserted.
+      This property is used to avoid the back-powering issue.
+    type: boolean
+
 required:
   - compatible
   - reg
-- 
2.39.2

[PATCH AUTOSEL 6.4 35/58] HID: i2c-hid: goodix: Add support for "goodix,no-reset-during-suspend" property

[Sasha Levin]

From: Fei Shao <fshao@chromium.org>

[ Upstream commit 7607f12ba735f04e0ef8718dabadf3a765c9a477 ]

In the beginning, commit 18eeef46d359 ("HID: i2c-hid: goodix: Tie the
reset line to true state of the regulator") introduced a change to tie
the reset line of the Goodix touchscreen to the state of the regulator
to fix a power leakage issue in suspend.

After some time, the change was deemed unnecessary and was reverted in
commit 557e05fa9fdd ("HID: i2c-hid: goodix: Stop tying the reset line to
the regulator") due to difficulties in managing regulator notifiers for
designs like Evoker, which provides a second power rail to touchscreen.

However, the revert caused a power regression on another Chromebook
device Steelix in the field, which has a dedicated always-on regulator
for touchscreen and was covered by the workaround in the first commit.

To address both cases, this patch adds the support for the new
"goodix,no-reset-during-suspend" property in the driver:
- When set to true, the driver does not assert the reset GPIO during
  power-down.
  Instead, the GPIO will be asserted during power-up to ensure the
  touchscreen always has a clean start and consistent behavior after
  resuming.
  This is for designs with a dedicated always-on regulator.
- When set to false or unset, the driver uses the original control flow
  and asserts GPIO and disables regulators normally.
  This is for the two-regulator and shared-regulator designs.

Signed-off-by: Fei Shao <fshao@chromium.org>
Suggested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/i2c-hid/i2c-hid-of-goodix.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/i2c-hid/i2c-hid-of-goodix.c b/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
index 0060e3dcd775d..db4639db98407 100644
--- a/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
+++ b/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
@@ -28,6 +28,7 @@ struct i2c_hid_of_goodix {
 	struct regulator *vdd;
 	struct regulator *vddio;
 	struct gpio_desc *reset_gpio;
+	bool no_reset_during_suspend;
 	const struct goodix_i2c_hid_timing_data *timings;
 };
 
@@ -37,6 +38,14 @@ static int goodix_i2c_hid_power_up(struct i2chid_ops *ops)
 		container_of(ops, struct i2c_hid_of_goodix, ops);
 	int ret;
 
+	/*
+	 * We assert reset GPIO here (instead of during power-down) to ensure
+	 * the device will have a clean state after powering up, just like the
+	 * normal scenarios will have.
+	 */
+	if (ihid_goodix->no_reset_during_suspend)
+		gpiod_set_value_cansleep(ihid_goodix->reset_gpio, 1);
+
 	ret = regulator_enable(ihid_goodix->vdd);
 	if (ret)
 		return ret;
@@ -60,7 +69,9 @@ static void goodix_i2c_hid_power_down(struct i2chid_ops *ops)
 	struct i2c_hid_of_goodix *ihid_goodix =
 		container_of(ops, struct i2c_hid_of_goodix, ops);
 
-	gpiod_set_value_cansleep(ihid_goodix->reset_gpio, 1);
+	if (!ihid_goodix->no_reset_during_suspend)
+		gpiod_set_value_cansleep(ihid_goodix->reset_gpio, 1);
+
 	regulator_disable(ihid_goodix->vddio);
 	regulator_disable(ihid_goodix->vdd);
 }
@@ -91,6 +102,9 @@ static int i2c_hid_of_goodix_probe(struct i2c_client *client)
 	if (IS_ERR(ihid_goodix->vddio))
 		return PTR_ERR(ihid_goodix->vddio);
 
+	ihid_goodix->no_reset_during_suspend =
+		of_property_read_bool(client->dev.of_node, "goodix,no-reset-during-suspend");
+
 	ihid_goodix->timings = device_get_match_data(&client->dev);
 
 	return i2c_hid_core_probe(client, &ihid_goodix->ops, 0x0001, 0);
-- 
2.39.2

[PATCH AUTOSEL 6.4 36/58] HID: logitech-hidpp: Add USB and Bluetooth IDs for the Logitech G915 TKL Keyboard

[Sasha Levin]

From: stuarthayhurst <stuart.a.hayhurst@gmail.com>

[ Upstream commit 48aea8b445c422a372cf15915101035a47105421 ]

Adds the USB and Bluetooth IDs for the Logitech G915 TKL keyboard, for device detection
For this device, this provides battery reporting on top of hid-generic

Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-logitech-hidpp.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index 5e1a412fd28fa..2ff007244d5e1 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -4608,6 +4608,8 @@ static const struct hid_device_id hidpp_devices[] = {
 	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC086) },
 	{ /* Logitech G903 Hero Gaming Mouse over USB */
 	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC091) },
+	{ /* Logitech G915 TKL Keyboard over USB */
+	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC343) },
 	{ /* Logitech G920 Wheel over USB */
 	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G920_WHEEL),
 		.driver_data = HIDPP_QUIRK_CLASS_G920 | HIDPP_QUIRK_FORCE_OUTPUT_REPORTS},
@@ -4630,6 +4632,8 @@ static const struct hid_device_id hidpp_devices[] = {
 	{ /* MX5500 keyboard over Bluetooth */
 	  HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb30b),
 	  .driver_data = HIDPP_QUIRK_HIDPP_CONSUMER_VENDOR_KEYS },
+	{ /* Logitech G915 TKL keyboard over Bluetooth */
+	  HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb35f) },
 	{ /* M-RCQ142 V470 Cordless Laser Mouse over Bluetooth */
 	  HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb008) },
 	{ /* MX Master mouse over Bluetooth */
-- 
2.39.2

[PATCH AUTOSEL 6.4 43/58] HID: add quirk for 03f0:464a HP Elite Presenter Mouse

[Sasha Levin]

From: Marco Morandini <marco.morandini@polimi.it>

[ Upstream commit 0db117359e47750d8bd310d19f13e1c4ef7fc26a ]

HP Elite Presenter Mouse HID Record Descriptor shows
two mouses (Repord ID 0x1 and 0x2), one keypad (Report ID 0x5),
two Consumer Controls (Report IDs 0x6 and 0x3).
Previous to this commit it registers one mouse, one keypad
and one Consumer Control, and it was usable only as a
digitl laser pointer (one of the two mouses). This patch defines
the 464a USB device ID and enables the HID_QUIRK_MULTI_INPUT
quirk for it, allowing to use the device both as a mouse
and a digital laser pointer.

Signed-off-by: Marco Morandini <marco.morandini@polimi.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-ids.h    | 1 +
 drivers/hid/hid-quirks.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 5d29abac2300e..55a436a6dde98 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -620,6 +620,7 @@
 #define USB_DEVICE_ID_UGCI_FIGHTING	0x0030
 
 #define USB_VENDOR_ID_HP		0x03f0
+#define USB_PRODUCT_ID_HP_ELITE_PRESENTER_MOUSE_464A		0x464a
 #define USB_PRODUCT_ID_HP_LOGITECH_OEM_USB_OPTICAL_MOUSE_0A4A	0x0a4a
 #define USB_PRODUCT_ID_HP_LOGITECH_OEM_USB_OPTICAL_MOUSE_0B4A	0x0b4a
 #define USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE		0x134a
diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index 804fc03600cc9..3983b4f282f8f 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -96,6 +96,7 @@ static const struct hid_device_id hid_quirks[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD_A096), HID_QUIRK_NO_INIT_REPORTS },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD_A293), HID_QUIRK_ALWAYS_POLL },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_LOGITECH_OEM_USB_OPTICAL_MOUSE_0A4A), HID_QUIRK_ALWAYS_POLL },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_ELITE_PRESENTER_MOUSE_464A), HID_QUIRK_MULTI_INPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_LOGITECH_OEM_USB_OPTICAL_MOUSE_0B4A), HID_QUIRK_ALWAYS_POLL },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE), HID_QUIRK_ALWAYS_POLL },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE_094A), HID_QUIRK_ALWAYS_POLL },
-- 
2.39.2

[PATCH AUTOSEL 6.4 52/58] HID: intel-ish-hid: ipc: Add Arrow Lake PCI device ID

[Sasha Levin]

From: Even Xu <even.xu@intel.com>

[ Upstream commit 4982126e3029cd59fbd1da0d9cc0365a0585fe64 ]

Add device ID of Arrow Lake-H into ishtp support list.

Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/intel-ish-hid/ipc/hw-ish.h  | 1 +
 drivers/hid/intel-ish-hid/ipc/pci-ish.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/hid/intel-ish-hid/ipc/hw-ish.h b/drivers/hid/intel-ish-hid/ipc/hw-ish.h
index fc108f19a64c3..e99f3a3c65e15 100644
--- a/drivers/hid/intel-ish-hid/ipc/hw-ish.h
+++ b/drivers/hid/intel-ish-hid/ipc/hw-ish.h
@@ -33,6 +33,7 @@
 #define ADL_N_DEVICE_ID		0x54FC
 #define RPL_S_DEVICE_ID		0x7A78
 #define MTL_P_DEVICE_ID		0x7E45
+#define ARL_H_DEVICE_ID		0x7745
 
 #define	REVISION_ID_CHT_A0	0x6
 #define	REVISION_ID_CHT_Ax_SI	0x0
diff --git a/drivers/hid/intel-ish-hid/ipc/pci-ish.c b/drivers/hid/intel-ish-hid/ipc/pci-ish.c
index 7120b30ac51d0..55cb25038e632 100644
--- a/drivers/hid/intel-ish-hid/ipc/pci-ish.c
+++ b/drivers/hid/intel-ish-hid/ipc/pci-ish.c
@@ -44,6 +44,7 @@ static const struct pci_device_id ish_pci_tbl[] = {
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, ADL_N_DEVICE_ID)},
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, RPL_S_DEVICE_ID)},
 	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, MTL_P_DEVICE_ID)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, ARL_H_DEVICE_ID)},
 	{0, }
 };
 MODULE_DEVICE_TABLE(pci, ish_pci_tbl);
-- 
2.39.2